2acc0ac542
later. We still need to hunt down snippets used that are not. 1324 modified files... http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
541 lines
16 KiB
C
541 lines
16 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2006 by Barry Wardell
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
#include "cpu.h"
|
|
#include "lcd.h"
|
|
#include "kernel.h"
|
|
#include "system.h"
|
|
|
|
/** Initialized in lcd_init_device() **/
|
|
/* Is the power turned on? */
|
|
static bool power_on;
|
|
/* Is the display turned on? */
|
|
static bool display_on;
|
|
/* Amount of vertical offset. Used for flip offset correction/detection. */
|
|
static int y_offset;
|
|
/* Reverse flag. Must be remembered when display is turned off. */
|
|
static unsigned short disp_control_rev;
|
|
/* Contrast setting << 8 */
|
|
static int lcd_contrast;
|
|
|
|
static unsigned lcd_yuv_options SHAREDBSS_ATTR = 0;
|
|
|
|
/* Forward declarations */
|
|
static void lcd_display_off(void);
|
|
|
|
/* register defines for the Renesas HD66773R */
|
|
#define R_START_OSC 0x00
|
|
#define R_DEVICE_CODE_READ 0x00
|
|
#define R_DRV_OUTPUT_CONTROL 0x01
|
|
#define R_DRV_AC_CONTROL 0x02
|
|
#define R_POWER_CONTROL1 0x03
|
|
#define R_POWER_CONTROL2 0x04
|
|
#define R_ENTRY_MODE 0x05
|
|
#define R_COMPARE_REG 0x06
|
|
#define R_DISP_CONTROL 0x07
|
|
#define R_FRAME_CYCLE_CONTROL 0x0b
|
|
#define R_POWER_CONTROL3 0x0c
|
|
#define R_POWER_CONTROL4 0x0d
|
|
#define R_POWER_CONTROL5 0x0e
|
|
#define R_GATE_SCAN_START_POS 0x0f
|
|
#define R_VERT_SCROLL_CONTROL 0x11
|
|
#define R_1ST_SCR_DRV_POS 0x14
|
|
#define R_2ND_SCR_DRV_POS 0x15
|
|
#define R_HORIZ_RAM_ADDR_POS 0x16
|
|
#define R_VERT_RAM_ADDR_POS 0x17
|
|
#define R_RAM_WRITE_DATA_MASK 0x20
|
|
#define R_RAM_ADDR_SET 0x21
|
|
#define R_WRITE_DATA_2_GRAM 0x22
|
|
#define R_RAM_READ_DATA 0x22
|
|
#define R_GAMMA_FINE_ADJ_POS1 0x30
|
|
#define R_GAMMA_FINE_ADJ_POS2 0x31
|
|
#define R_GAMMA_FINE_ADJ_POS3 0x32
|
|
#define R_GAMMA_GRAD_ADJ_POS 0x33
|
|
#define R_GAMMA_FINE_ADJ_NEG1 0x34
|
|
#define R_GAMMA_FINE_ADJ_NEG2 0x35
|
|
#define R_GAMMA_FINE_ADJ_NEG3 0x36
|
|
#define R_GAMMA_GRAD_ADJ_NEG 0x37
|
|
#define R_GAMMA_AMP_ADJ_POS 0x3a
|
|
#define R_GAMMA_AMP_ADJ_NEG 0x3b
|
|
|
|
static inline void lcd_wait_write(void)
|
|
{
|
|
while (LCD2_PORT & LCD2_BUSY_MASK);
|
|
}
|
|
|
|
/* Send command */
|
|
static inline void lcd_send_cmd(unsigned v)
|
|
{
|
|
lcd_wait_write();
|
|
LCD2_PORT = LCD2_CMD_MASK;
|
|
LCD2_PORT = LCD2_CMD_MASK | v;
|
|
}
|
|
|
|
/* Send 16-bit data */
|
|
static inline void lcd_send_data(unsigned v)
|
|
{
|
|
lcd_wait_write();
|
|
LCD2_PORT = LCD2_DATA_MASK | (v >> 8); /* Send MSB first */
|
|
LCD2_PORT = LCD2_DATA_MASK | (v & 0xff);
|
|
}
|
|
|
|
/* Send 16-bit data byte-swapped. Only needed until we can use block transfer. */
|
|
static inline void lcd_send_data_swapped(unsigned v)
|
|
{
|
|
lcd_wait_write();
|
|
LCD2_PORT = LCD2_DATA_MASK | (v & 0xff); /* Send LSB first */
|
|
LCD2_PORT = LCD2_DATA_MASK | (v >> 8);
|
|
}
|
|
|
|
/* Write value to register */
|
|
static void lcd_write_reg(int reg, int val)
|
|
{
|
|
lcd_send_cmd(reg);
|
|
lcd_send_data(val);
|
|
}
|
|
|
|
/*** hardware configuration ***/
|
|
|
|
int lcd_default_contrast(void)
|
|
{
|
|
return DEFAULT_CONTRAST_SETTING;
|
|
}
|
|
|
|
void lcd_set_contrast(int val)
|
|
{
|
|
/* Clamp val in range 0-14, 16-30 */
|
|
if (val < 1)
|
|
val = 0;
|
|
else if (val <= 15)
|
|
--val;
|
|
else if (val > 30)
|
|
val = 30;
|
|
|
|
lcd_contrast = val << 8;
|
|
|
|
if (!power_on)
|
|
return;
|
|
|
|
/* VCOMG=1, VDV4-0=xxxxx, VCM4-0=11000 */
|
|
lcd_write_reg(R_POWER_CONTROL5, 0x2018 | lcd_contrast);
|
|
}
|
|
|
|
void lcd_set_invert_display(bool yesno)
|
|
{
|
|
if (yesno == (disp_control_rev == 0x0000))
|
|
return;
|
|
|
|
disp_control_rev = yesno ? 0x0000 : 0x0004;
|
|
|
|
if (!display_on)
|
|
return;
|
|
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=1, DTE=1, REV=x, D1-0=11 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0033 | disp_control_rev);
|
|
}
|
|
|
|
|
|
/* turn the display upside down (call lcd_update() afterwards) */
|
|
void lcd_set_flip(bool yesno)
|
|
{
|
|
if (yesno == (y_offset != 0))
|
|
return;
|
|
|
|
/* The LCD controller is 132x160 while the LCD itself is 128x160, so we need
|
|
* to shift the origin by 4 when we flip the LCD */
|
|
y_offset = yesno ? 4 : 0;
|
|
|
|
if (!power_on)
|
|
return;
|
|
|
|
/* SCN4-0=000x0 (G1/G160) */
|
|
lcd_write_reg(R_GATE_SCAN_START_POS, yesno ? 0x0002 : 0x0000);
|
|
/* SM=0, GS=x, SS=x, NL4-0=10011 (G1-G160) */
|
|
lcd_write_reg(R_DRV_OUTPUT_CONTROL, yesno ? 0x0213 : 0x0113);
|
|
}
|
|
|
|
/* LCD init */
|
|
void lcd_init_device(void)
|
|
{
|
|
#ifndef BOOTLOADER
|
|
/* The OF won't boot if this is done in the bootloader - ideally we should
|
|
tweak the lcd controller speed settings but this will do for now */
|
|
CLCD_CLOCK_SRC |= 0xc0000000; /* Set LCD interface clock to PLL */
|
|
#endif
|
|
power_on = true;
|
|
display_on = true;
|
|
y_offset = 0;
|
|
disp_control_rev = 0x0004;
|
|
lcd_contrast = DEFAULT_CONTRAST_SETTING << 8;
|
|
}
|
|
|
|
static void lcd_power_on(void)
|
|
{
|
|
/* Be sure standby bit is clear. */
|
|
/* BT2-0=000, DC2-0=000, AP2-0=000, SLP=0, STB=0 */
|
|
lcd_write_reg(R_POWER_CONTROL1, 0x0000);
|
|
|
|
/** Power ON Sequence **/
|
|
/* Per datasheet Rev.1.10, Jun.21.2003, p. 99 */
|
|
|
|
lcd_write_reg(R_START_OSC, 0x0001); /* Start Oscillation */
|
|
/* 10ms or more for oscillation circuit to stabilize */
|
|
sleep(HZ/50);
|
|
/* Instruction (1) for power setting; VC2-0, VRH3-0, CAD,
|
|
VRL3-0, VCM4-0, VDV4-0 */
|
|
/* VC2-0=001 */
|
|
lcd_write_reg(R_POWER_CONTROL3, 0x0001);
|
|
/* VRL3-0=0100, PON=0, VRH3-0=0001 */
|
|
lcd_write_reg(R_POWER_CONTROL4, 0x0401);
|
|
/* CAD=1 */
|
|
lcd_write_reg(R_POWER_CONTROL2, 0x8000);
|
|
/* VCOMG=0, VDV4-0=xxxxx (19), VCM4-0=11000 */
|
|
lcd_write_reg(R_POWER_CONTROL5, 0x0018 | lcd_contrast);
|
|
/* Instruction (2) for power setting; BT2-0, DC2-0, AP2-0 */
|
|
/* BT2-0=000, DC2-0=001, AP2-0=011, SLP=0, STB=0 */
|
|
lcd_write_reg(R_POWER_CONTROL1, 0x002c);
|
|
/* Instruction (3) for power setting; VCOMG = "1" */
|
|
/* VCOMG=1, VDV4-0=xxxxx (19), VCM4-0=11000 */
|
|
lcd_write_reg(R_POWER_CONTROL5, 0x2018 | lcd_contrast);
|
|
|
|
/* 40ms or more; time for step-up circuits 1,2 to stabilize */
|
|
sleep(HZ/25);
|
|
|
|
/* Instruction (4) for power setting; PON = "1" */
|
|
/* VRL3-0=0100, PON=1, VRH3-0=0001 */
|
|
lcd_write_reg(R_POWER_CONTROL4, 0x0411);
|
|
|
|
/* 40ms or more; time for step-up circuit 4 to stabilize */
|
|
sleep(HZ/25);
|
|
|
|
/* Instructions for other mode settings (in register order). */
|
|
/* SM=0, GS=x, SS=0, NL4-0=10011 (G1-G160)*/
|
|
lcd_write_reg(R_DRV_OUTPUT_CONTROL, y_offset ? 0x0013 : 0x0113); /* different to X5 */
|
|
/* FLD1-0=01 (1 field), B/C=1, EOR=1 (C-pat), NW5-0=000000 (1 row) */
|
|
lcd_write_reg(R_DRV_AC_CONTROL, 0x0700);
|
|
/* DIT=0, BGR=1, HWM=0, I/D1-0=10, AM=1, LG2-0=000 */
|
|
lcd_write_reg(R_ENTRY_MODE, 0x1028); /* different to X5 */
|
|
/* CP15-0=0000000000000000 */
|
|
lcd_write_reg(R_COMPARE_REG, 0x0000);
|
|
/* NO1-0=01, SDT1-0=00, EQ1-0=00, DIV1-0=00, RTN3-00000 */
|
|
lcd_write_reg(R_FRAME_CYCLE_CONTROL, 0x4000);
|
|
/* SCN4-0=000x0 (G1/G160) */
|
|
/* lcd_write_reg(R_GATE_SCAN_START_POS, y_offset ? 0x0000 : 0x0002); */
|
|
/* VL7-0=0x00 */
|
|
lcd_write_reg(R_VERT_SCROLL_CONTROL, 0x0000);
|
|
/* SE17-10(End)=0x9f (159), SS17-10(Start)=0x00 */
|
|
lcd_write_reg(R_1ST_SCR_DRV_POS, 0x9f00);
|
|
/* SE27-20(End)=0x5c (92), SS27-20(Start)=0x00 */
|
|
lcd_write_reg(R_2ND_SCR_DRV_POS, 0x5c00);
|
|
/* HEA7-0=7f, HSA7-0=00 */
|
|
lcd_write_reg(R_HORIZ_RAM_ADDR_POS, 0x7f00);
|
|
/* PKP12-10=0x0, PKP02-00=0x0 */
|
|
lcd_write_reg(R_GAMMA_FINE_ADJ_POS1, 0x0003);
|
|
/* PKP32-30=0x4, PKP22-20=0x0 */
|
|
lcd_write_reg(R_GAMMA_FINE_ADJ_POS2, 0x0400);
|
|
/* PKP52-50=0x4, PKP42-40=0x7 */
|
|
lcd_write_reg(R_GAMMA_FINE_ADJ_POS3, 0x0407);
|
|
/* PRP12-10=0x3, PRP02-00=0x5 */
|
|
lcd_write_reg(R_GAMMA_GRAD_ADJ_POS, 0x0305);
|
|
/* PKN12-10=0x0, PKN02-00=0x3 */
|
|
lcd_write_reg(R_GAMMA_FINE_ADJ_NEG1, 0x0003);
|
|
/* PKN32-30=0x7, PKN22-20=0x4 */
|
|
lcd_write_reg(R_GAMMA_FINE_ADJ_NEG2, 0x0704);
|
|
/* PKN52-50=0x4, PRN42-40=0x7 */
|
|
lcd_write_reg(R_GAMMA_FINE_ADJ_NEG3, 0x0407);
|
|
/* PRN12-10=0x5, PRN02-00=0x3 */
|
|
lcd_write_reg(R_GAMMA_GRAD_ADJ_NEG, 0x0503);
|
|
/* VRP14-10=0x14, VRP03-00=0x09 */
|
|
lcd_write_reg(R_GAMMA_AMP_ADJ_POS, 0x1409);
|
|
/* VRN14-00=0x06, VRN03-00=0x02 */
|
|
lcd_write_reg(R_GAMMA_AMP_ADJ_NEG, 0x0602);
|
|
|
|
/* 100ms or more; time for step-up circuits to stabilize */
|
|
sleep(HZ/10);
|
|
|
|
power_on = true;
|
|
}
|
|
|
|
static void lcd_power_off(void)
|
|
{
|
|
/* Display must be off first */
|
|
if (display_on)
|
|
lcd_display_off();
|
|
|
|
power_on = false;
|
|
|
|
/** Power OFF sequence **/
|
|
/* Per datasheet Rev.1.10, Jun.21.2003, p. 99 */
|
|
|
|
/* Step-up1 halt setting bit */
|
|
/* BT2-0=110, DC2-0=001, AP2-0=011, SLP=0, STB=0 */
|
|
lcd_write_reg(R_POWER_CONTROL1, 0x062c);
|
|
/* Step-up3,4 halt setting bit */
|
|
/* VRL3-0=0100, PON=0, VRH3-0=0001 */
|
|
lcd_write_reg(R_POWER_CONTROL4, 0x0401);
|
|
/* VCOMG=0, VDV4-0=10011, VCM4-0=11000 */
|
|
lcd_write_reg(R_POWER_CONTROL5, 0x0018 | lcd_contrast);
|
|
|
|
/* Wait 100ms or more */
|
|
sleep(HZ/10);
|
|
|
|
/* Step-up2,amp halt setting bit */
|
|
/* BT2-0=000, DC2-0=000, AP2-0=000, SLP=0, STB=0 */
|
|
lcd_write_reg(R_POWER_CONTROL1, 0x0000);
|
|
}
|
|
|
|
static void lcd_display_on(void)
|
|
{
|
|
/* Be sure power is on first */
|
|
if (!power_on)
|
|
lcd_power_on();
|
|
|
|
/** Display ON Sequence **/
|
|
/* Per datasheet Rev.1.10, Jun.21.2003, p. 97 */
|
|
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=0, DTE=0, REV=0, D1-0=01 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0001);
|
|
|
|
sleep(HZ/25); /* Wait 2 frames or more */
|
|
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=1, DTE=0, REV=x, D1-0=01 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0021 | disp_control_rev);
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=1, DTE=0, REV=x, D1-0=11 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0023 | disp_control_rev);
|
|
|
|
sleep(HZ/25); /* Wait 2 frames or more */
|
|
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=1, DTE=1, REV=x, D1-0=11 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0033 | disp_control_rev);
|
|
|
|
display_on = true;
|
|
}
|
|
|
|
static void lcd_display_off(void)
|
|
{
|
|
display_on = false;
|
|
|
|
/** Display OFF sequence **/
|
|
/* Per datasheet Rev.1.10, Jun.21.2003, p. 97 */
|
|
|
|
/* EQ1-0=00 already */
|
|
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=1, DTE=1, REV=x, D1-0=10 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0032 | disp_control_rev);
|
|
|
|
sleep(HZ/25); /* Wait 2 frames or more */
|
|
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=1, DTE=0, REV=x, D1-0=10 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0022 | disp_control_rev);
|
|
|
|
sleep(HZ/25); /* Wait 2 frames or more */
|
|
|
|
/* PT1-0=00, VLE2-1=00, SPT=0, GON=0, DTE=0, REV=0, D1-0=00 */
|
|
lcd_write_reg(R_DISP_CONTROL, 0x0000);
|
|
}
|
|
|
|
void lcd_enable(bool on)
|
|
{
|
|
if (on == display_on)
|
|
return;
|
|
|
|
if (on)
|
|
{
|
|
lcd_display_on();
|
|
/* Probably out of sync and we don't wanna pepper the code with
|
|
lcd_update() calls for this. */
|
|
lcd_update();
|
|
lcd_call_enable_hook();
|
|
}
|
|
else
|
|
{
|
|
lcd_display_off();
|
|
}
|
|
}
|
|
|
|
bool lcd_enabled(void)
|
|
{
|
|
return display_on;
|
|
}
|
|
|
|
void lcd_sleep(void)
|
|
{
|
|
if (power_on)
|
|
lcd_power_off();
|
|
|
|
/* Set standby mode */
|
|
/* BT2-0=000, DC2-0=000, AP2-0=000, SLP=0, STB=1 */
|
|
lcd_write_reg(R_POWER_CONTROL1, 0x0001);
|
|
}
|
|
|
|
/*** update functions ***/
|
|
|
|
void lcd_yuv_set_options(unsigned options)
|
|
{
|
|
lcd_yuv_options = options;
|
|
}
|
|
|
|
/* Line write helper function for lcd_yuv_blit. Write two lines of yuv420. */
|
|
extern void lcd_write_yuv420_lines(unsigned char const * const src[3],
|
|
int width,
|
|
int stride);
|
|
extern void lcd_write_yuv420_lines_odither(unsigned char const * const src[3],
|
|
int width,
|
|
int stride,
|
|
int x_screen, /* To align dither pattern */
|
|
int y_screen);
|
|
|
|
/* Performance function to blit a YUV bitmap directly to the LCD */
|
|
void lcd_blit_yuv(unsigned char * const src[3],
|
|
int src_x, int src_y, int stride,
|
|
int x, int y, int width, int height)
|
|
{
|
|
const unsigned char *yuv_src[3];
|
|
const unsigned char *ysrc_max;
|
|
int y0;
|
|
int options;
|
|
|
|
if (!display_on)
|
|
return;
|
|
|
|
width &= ~1;
|
|
height &= ~1;
|
|
|
|
/* calculate the drawing region */
|
|
|
|
/* The 20GB LCD is actually 128x160 but rotated 90 degrees so the origin
|
|
* is actually the bottom left and horizontal and vertical are swapped.
|
|
* Rockbox expects the origin to be the top left so we need to use
|
|
* 127 - y instead of just y */
|
|
|
|
/* max vert << 8 | start vert */
|
|
lcd_write_reg(R_VERT_RAM_ADDR_POS, ((x + width - 1) << 8) | x);
|
|
|
|
y0 = LCD_HEIGHT - 1 - y + y_offset;
|
|
|
|
/* DIT=0, BGR=1, HWM=0, I/D1-0=10, AM=0, LG2-0=000 */
|
|
lcd_write_reg(R_ENTRY_MODE, 0x1020);
|
|
|
|
yuv_src[0] = src[0] + src_y * stride + src_x;
|
|
yuv_src[1] = src[1] + (src_y * stride >> 2) + (src_x >> 1);
|
|
yuv_src[2] = src[2] + (yuv_src[1] - src[1]);
|
|
ysrc_max = yuv_src[0] + height * stride;
|
|
|
|
options = lcd_yuv_options;
|
|
|
|
do
|
|
{
|
|
/* max horiz << 8 | start horiz */
|
|
lcd_write_reg(R_HORIZ_RAM_ADDR_POS, (y0 << 8) | (y0 - 1));
|
|
|
|
/* position cursor (set AD0-AD15) */
|
|
/* start vert << 8 | start horiz */
|
|
lcd_write_reg(R_RAM_ADDR_SET, (x << 8) | y0);
|
|
|
|
/* start drawing */
|
|
lcd_send_cmd(R_WRITE_DATA_2_GRAM);
|
|
|
|
if (options & LCD_YUV_DITHER)
|
|
{
|
|
lcd_write_yuv420_lines_odither(yuv_src, width, stride,
|
|
x, y);
|
|
y -= 2;
|
|
}
|
|
else
|
|
{
|
|
lcd_write_yuv420_lines(yuv_src, width, stride);
|
|
}
|
|
|
|
y0 -= 2;
|
|
yuv_src[0] += stride << 1;
|
|
yuv_src[1] += stride >> 1;
|
|
yuv_src[2] += stride >> 1;
|
|
}
|
|
while (yuv_src[0] < ysrc_max);
|
|
|
|
/* DIT=0, BGR=1, HWM=0, I/D1-0=10, AM=1, LG2-0=000 */
|
|
lcd_write_reg(R_ENTRY_MODE, 0x1028);
|
|
}
|
|
|
|
|
|
/* Update a fraction of the display. */
|
|
void lcd_update_rect(int x0, int y0, int width, int height)
|
|
{
|
|
int x1, y1;
|
|
unsigned short *addr;
|
|
|
|
if (!display_on)
|
|
return;
|
|
|
|
/* calculate the drawing region */
|
|
y1 = (y0 + height) - 1; /* max vert */
|
|
x1 = (x0 + width) - 1; /* max horiz */
|
|
|
|
if(x1 >= LCD_WIDTH)
|
|
x1 = LCD_WIDTH - 1;
|
|
if (x1 <= 0)
|
|
return; /* nothing left to do, 0 is harmful to lcd_write_data() */
|
|
if(y1 >= LCD_HEIGHT)
|
|
y1 = LCD_HEIGHT-1;
|
|
|
|
/* The 20GB LCD is actually 128x160 but rotated 90 degrees so the origin
|
|
* is actually the bottom left and horizontal and vertical are swapped.
|
|
* Rockbox expects the origin to be the top left so we need to use
|
|
* 127 - y instead of just y */
|
|
|
|
/* max horiz << 8 | start horiz */
|
|
lcd_send_cmd(R_HORIZ_RAM_ADDR_POS);
|
|
lcd_send_data( (((LCD_HEIGHT-1)-y0+y_offset) << 8) | ((LCD_HEIGHT-1)-y1+y_offset) );
|
|
|
|
/* max vert << 8 | start vert */
|
|
lcd_send_cmd(R_VERT_RAM_ADDR_POS);
|
|
lcd_send_data((x1 << 8) | x0);
|
|
|
|
/* position cursor (set AD0-AD15) */
|
|
/* start vert << 8 | start horiz */
|
|
lcd_send_cmd(R_RAM_ADDR_SET);
|
|
lcd_send_data( (x0 << 8) | ((LCD_HEIGHT-1)-y0+y_offset) );
|
|
|
|
/* start drawing */
|
|
lcd_send_cmd(R_WRITE_DATA_2_GRAM);
|
|
|
|
addr = (unsigned short*)&lcd_framebuffer[y0][x0];
|
|
|
|
int c, r;
|
|
|
|
/* for each row */
|
|
for (r = 0; r < height; r++) {
|
|
/* for each column */
|
|
for (c = 0; c < width; c++) {
|
|
/* output 1 pixel */
|
|
lcd_send_data_swapped(*addr++);
|
|
}
|
|
|
|
addr += LCD_WIDTH - width;
|
|
}
|
|
}
|
|
|
|
/* Update the display.
|
|
This must be called after all other LCD functions that change the display. */
|
|
void lcd_update(void)
|
|
{
|
|
lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
|
|
}
|