rockbox/firmware/target/coldfire/iaudio/x5/lcd-as-x5.S
Jens Arnold f8b1da2f7b H300, X5: Faster lcd_yuv_blit() using EMAC. Speedup of the function itself at 124MHz: 10.5% on X5, 16.5% on H300. mpegplayer speedup 3..4%
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11429 a1c6a512-1295-4272-9138-f99709370657
2006-11-04 00:42:18 +00:00

343 lines
11 KiB
ArmAsm

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Michael Sevakis
* Based on lcd_write_data for H300 in lcd.S
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
.section .icode,"ax",@progbits
/* begin lcd_write_yuv420_lines
*
* See http://en.wikipedia.org/wiki/YCbCr
* ITU-R BT.601 (formerly CCIR 601):
* |Y'| | 0.299000 0.587000 0.114000| |R|
* |Pb| = |-0.168736 -0.331264 0.500000| |G| or 0.564334*(B - Y')
* |Pr| | 0.500000 -0.418688 0.081312| |B| or 0.713267*(R - Y')
* Scaled, normalized and rounded:
* |Y'| | 65 129 25| |R| + 16 : 16->235
* |Cb| = |-38 -74 112| |G| + 128 : 16->240
* |Cr| |112 -94 -18| |B| + 128 : 16->240
*
* The inverse:
* |R| |1.000000 -0.000001 1.402000| |Y'|
* |G| = |1.000000 -0.334136 -0.714136| |Pb|
* |B| |1.000000 1.772000 0.000000| |Pr|
* Scaled, normalized, rounded and tweaked to yield RGB 666:
* |R| |19611723 0 26881894| |Y' - 16| >> 26
* |G| = |19611723 -6406711 -13692816| |Cb - 128| >> 26
* |B| |19611723 33976259 0| |Cr - 128| >> 26
*
* Needs EMAC set to saturated, signed integer mode.
*/
.align 2
.global lcd_write_yuv420_lines
.type lcd_write_yuv420_lines, @function
lcd_write_yuv420_lines:
lea.l (-44, %sp), %sp /* free up some registers */
movem.l %d2-%d7/%a2-%a6, (%sp)
lea.l 0xf0008002, %a0 /* LCD data port */
movem.l (44+4, %sp), %a1-%a4 /* Y data, Cb data, Cr data, width */
lea.l (%a1, %a4), %a4 /* end address */
move.l #19611723, %a5 /* y factor */
move.l #33976259, %a6 /* bu factor */
move.l #-6406711, %d5 /* gu factor */
move.l #-13692816, %d6 /* gv factor */
move.l #0x01040820, %d7 /* bitmask for signed->unsigned conversion
* of R, G and B within RGGB6666 at once */
/* chroma for (very) first & second pixel */
clr.l %d2 /* load u component */
move.b (%a2)+, %d2
clr.l %d3 /* load v component */
move.b (%a3)+, %d3
moveq.l #-128, %d0
add.l %d0, %d2
add.l %d0, %d3
mac.l %a6, %d2, %acc0 /* bu */
mac.l %d5, %d2, %acc1 /* gu */
mac.l %d6, %d3, %acc1 /* gv */
move.l #26881894, %d0 /* rv factor */
mac.l %d0, %d3, %acc2 /* rv */
/* luma for (very) first pixel */
clr.l %d1
move.b (%a1)+, %d1
moveq.l #-126, %d0
add.l %d1, %d0 /* y' (-0.5 ... +0.5) */
mac.l %a5, %d0, %acc0
mac.l %a5, %d0, %acc1
mac.l %a5, %d0, %acc2
bra.b .yuv_line_entry
.yuv_line_loop:
/* chroma for first & second pixel */
clr.l %d2 /* load u component */
move.b (%a2)+, %d2
clr.l %d3 /* load v component */
move.b (%a3)+, %d3
moveq.l #-128, %d0
add.l %d0, %d2
add.l %d0, %d3
mac.l %a6, %d2, %acc0 /* bu */
mac.l %d5, %d2, %acc1 /* gu */
mac.l %d6, %d3, %acc1 /* gv */
move.l #26881894, %d0 /* rv factor */
mac.l %d0, %d3, %acc2 /* rv */
/* luma for first pixel */
clr.l %d1
move.b (%a1)+, %d1
moveq.l #-126, %d0
add.l %d1, %d0 /* y' (-0.5 ... +0.5) */
mac.l %a5, %d0, %acc0
mac.l %a5, %d0, %acc1
mac.l %a5, %d0, %acc2
move.w %d4, (%a0)
/* 2nd LCD write is delayed one pixel to use it for filling the EMAC latency */
/* convert to RGB666, pack and output */
.yuv_line_entry:
moveq.l #26, %d0
move.l %acc0, %d4
move.l %acc1, %d3
move.l %acc2, %d2
lsr.l %d0, %d4
lsr.l %d0, %d3
lsr.l %d0, %d2
lsl.l #6, %d2
or.l %d3, %d2 /* |00000000|00000000|0000Rrrr|rrGggggg| */
lsl.l #7, %d2
or.l %d2, %d3 /* |00000000|00000Rrr|rrrGgggg|g0Gggggg| */
lsl.l #6, %d3
or.l %d3, %d4 /* |0000000R|rrrrrGgg|ggg0Gggg|ggBbbbbb| */
eor.l %d7, %d4 /* |0000000r|rrrrrggg|ggg0gggg|ggbbbbbb| */
swap %d4
move.w %d4, (%a0)
swap %d4
/* luma for second pixel as delta from the first */
clr.l %d0
move.b (%a1)+, %d0
sub.l %d1, %d0
mac.l %a5, %d0, %acc0
mac.l %a5, %d0, %acc1
mac.l %a5, %d0, %acc2
move.w %d4, (%a0)
/* 2nd LCD write is delayed one pixel to use it for filling the EMAC latency */
/* convert to RGB666, pack and output */
moveq.l #26, %d0
movclr.l %acc0, %d4
movclr.l %acc1, %d3
movclr.l %acc2, %d2
lsr.l %d0, %d4
lsr.l %d0, %d3
lsr.l %d0, %d2
lsl.l #6, %d2
or.l %d3, %d2 /* |00000000|00000000|0000Rrrr|rrGggggg| */
lsl.l #7, %d2
or.l %d2, %d3 /* |00000000|00000Rrr|rrrGgggg|g0Gggggg| */
lsl.l #6, %d3
or.l %d3, %d4 /* |0000000R|rrrrrGgg|ggg0Gggg|ggBbbbbb| */
eor.l %d7, %d4 /* |0000000r|rrrrrggg|ggg0gggg|ggbbbbbb| */
swap %d4
move.w %d4, (%a0)
swap %d4
cmp.l %a1, %a4 /* run %a1 up to end of line */
bhi.w .yuv_line_loop
tst.l (44+4, %sp) /* use original Y pointer as a flag to */
beq.b .yuv_exit /* distinguish between first and second */
clr.l (44+4, %sp) /* pixel line */
/* Rewind chroma pointers */
movem.l (44+8, %sp), %a2-%a4 /* Cb data, Cr data, width */
lea.l (%a1, %a4), %a4 /* end address */
bra.w .yuv_line_loop
.yuv_exit:
move.w %d4, (%a0) /* write (very) last 2nd word */
movem.l (%sp), %d2-%d7/%a2-%a6
lea.l (44, %sp), %sp /* restore registers */
rts
.yuv_end:
.size lcd_write_yuv420_lines, yuv_end - lcd_write_yuv420_lines
/* begin lcd_write_data */
.align 2
.global lcd_write_data
.type lcd_write_data,@function
lcd_write_data:
move.l (4,%sp),%a0 /* data pointer */
move.l (8,%sp),%d0 /* length in words */
add.l %d0,%d0 /* words -> bytes */
add.l %a0,%d0 /* -> end address */
lea.l 0xf0008002,%a1 /* LCD data port */
lea.l (-20,%sp),%sp /* free up some registers */
movem.l %d2-%d5/%a2,(%sp)
move.l %a0,%d1
btst.l #1,%d1 /* already longword aligned? */
beq.b .wd_wordl_end /* yes: skip initial word copy */
/* transfer initial word */
move.w (%a0)+,%d2 /* |????????|????????|rrrrrggg|gggbbbbb| */
move.l %d2,%d1
lsr.l #7,%d1 /* |0000000?|????????|???????r|rrrrgggg| */
move.w %d1,(%a1) /* ^ ^^^^^^^ */
lsl.l #1,%d2 /* |????????|???????r|rrrrgggg|ggbbbbb0| */
move.w %d2,(%a1) /* ^ ^^^^^^^ */
.wd_wordl_end: /* now longword aligned */
moveq.l #28,%d1
add.l %a0,%d1
and.l #0xFFFFFFF0,%d1 /* %d1 = second line bound */
cmp.l %d1,%d0 /* at least one full line to send? */
blo.w .wd_long2_start /* no: skip to trailing longword handling */
subq.l #8,%d1
subq.l #8,%d1 /* %d1 = first line bound */
cmp.l %a0,%d1 /* any leading longwords? */
bls.b .wd_long1_end /* no: skip leading long loop */
.wd_long1_loop:
move.l (%a0)+,%d2 /* read longword */
swap %d2 /* |rrrrrggg|gggbbbbb|RRRRRGGG|GGGBBBBB| */
move.l %d2,%d5
lsr.l #7,%d5 /* |0000000r|rrrrgggg|ggbbbbbR|RRRRGGGG| */
move.w %d5,(%a1) /* ^ ^^^^^^^ */
lsl.l #1,%d2 /* |rrrrgggg|ggbbbbbR|RRRRGGGG|GGBBBBB0| */
move.w %d2,(%a1) /* ^ ^^^^^^^ */
swap %d5 /* |ggbbbbbR|RRRRGGGG|0000000r|rrrrgggg| */
move.w %d5,(%a1) /* ^ ^^^^^^^ */
swap %d2 /* |RRRRBGGG|GGBBBBB0|rrrrgggg|ggbbbbbR| */
move.w %d2,(%a1) /* ^ ^^^^^^^ */
cmp.l %a0,%d1
bhi.b .wd_long1_loop
.wd_long1_end:
move.l %d0,%a2
lea.l (-14,%a2),%a2
.wd_line_loop:
movem.l (%a0),%d1-%d4 /* burst-read eight words */
lea.l (16,%a0),%a0 /* increment address */
/* transfer four pairs of longs to display */
swap %d1
move.l %d1,%d5
lsr.l #7,%d5
move.w %d5,(%a1)
lsl.l #1,%d1
move.w %d1,(%a1)
swap %d5
move.w %d5,(%a1)
swap %d1
move.w %d1,(%a1)
swap %d2
move.l %d2,%d5
lsr.l #7,%d5
move.w %d5,(%a1)
lsl.l #1,%d2
move.w %d2,(%a1)
swap %d5
move.w %d5,(%a1)
swap %d2
move.w %d2,(%a1)
swap %d3
move.l %d3,%d5
lsr.l #7,%d5
move.w %d5,(%a1)
lsl.l #1,%d3
move.w %d3,(%a1)
swap %d5
move.w %d5,(%a1)
swap %d3
move.w %d3,(%a1)
swap %d4
move.l %d4,%d5
lsr.l #7,%d5
move.w %d5,(%a1)
lsl.l #1,%d4
move.w %d4,(%a1)
swap %d5
move.w %d5,(%a1)
swap %d4
move.w %d4,(%a1)
cmp.l %a0,%a2 /* run %a0 up to last line bound */
bhi.w .wd_line_loop
.wd_long2_start:
subq.l #2,%d0 /* account for handling 2 words per loop */
cmp.l %a0,%d0 /* any (trailing longwords? */
bls.b .wd_long2_end /* no: skip trailing longword loop */
.wd_long2_loop:
move.l (%a0)+,%d2 /* read longword */
swap %d2
move.l %d2,%d5
lsr.l #7,%d5
move.w %d5,(%a1)
lsl.l #1,%d2
move.w %d2,(%a1)
swap %d5
move.w %d5,(%a1)
swap %d2
move.w %d2,(%a1)
cmp.l %a0,%d0 /* run %a0 up to last long bound */
bhi.b .wd_long2_loop
.wd_long2_end:
blo.b .wd_word2_end /* no final word: skip */
move.w (%a0)+,%d2 /* transfer final word */
move.l %d2,%d1
lsr.l #7,%d1
move.w %d1,(%a1)
lsl.l #1,%d2
move.w %d2,(%a1)
.wd_word2_end:
movem.l (%sp),%d2-%d5/%a2
lea.l (20,%sp),%sp /* restore registers */
rts
.wd_end:
.size lcd_write_data,.wd_end-lcd_write_data
/* end lcd_write_data */