rockbox/firmware/target/coldfire/iaudio/x5/backlight-x5.c
Miika Pekkarinen 73cd9f3b63 Turn backlight ON at boot unless bootloader has already done that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11992 a1c6a512-1295-4272-9138-f99709370657
2007-01-12 20:26:23 +00:00

70 lines
2 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Linus Nielsen Feltzing
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
#include "system.h"
#include "backlight.h"
#include "backlight-target.h"
#include "pcf50606.h"
#include "lcd.h"
bool __backlight_init(void)
{
__backlight_set_brightness(DEFAULT_BRIGHTNESS_SETTING);
__backlight_on();
return true; /* Backlight always ON after boot. */
}
void __backlight_on(void)
{
int level;
lcd_enable(true);
level = set_irq_level(HIGHEST_IRQ_LEVEL);
pcf50606_write(0x38, 0xb0); /* Backlight ON, GPO1INV=1, GPO1ACT=011 */
set_irq_level(level);
}
void __backlight_off(void)
{
int level = set_irq_level(HIGHEST_IRQ_LEVEL);
pcf50606_write(0x38, 0x80); /* Backlight OFF, GPO1INV=1, GPO1ACT=000 */
set_irq_level(level);
lcd_enable(false);
}
/* set brightness by changing the PWM */
void __backlight_set_brightness(int val)
{
/* disable IRQs while bitbanging */
int old_irq_level = set_irq_level(HIGHEST_IRQ_LEVEL);
pcf50606_write(0x35, (val << 1) | 0x01); /* 512Hz, Enable PWM */
/* enable IRQs again */
set_irq_level(old_irq_level);
}
void __remote_backlight_on(void)
{
and_l(~0x00200000, &GPIO_OUT);
}
void __remote_backlight_off(void)
{
or_l(0x00200000, &GPIO_OUT);
}