rockbox/firmware/target/arm/as3525/sansa-c200v2/button-c200v2.c
Rafaël Carré 95cf63b294 button-target.h : move prototypes to button.h
no need to define BUTTON_REMOTE anymore

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31620 a1c6a512-1295-4272-9138-f99709370657
2012-01-08 00:07:19 +00:00

91 lines
2.4 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Barry Wardell, (C) 2009 by Bertrik Sikken
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "system.h"
#include "button.h"
#include "backlight.h"
#include "dbop-as3525.h"
static unsigned short _dbop_din;
static bool hold_button = false;
#ifndef BOOTLOADER
static bool hold_button_old = false;
#endif
void button_init_device(void)
{
GPIOA_DIR &= ~(1<<3);
}
bool button_hold(void)
{
return hold_button;
}
/*
* Get button pressed from hardware
*/
int button_read_device(void)
{
int btn = BUTTON_NONE;
_dbop_din = dbop_read_input();
/* hold button handling */
hold_button = ((_dbop_din & (1<<12)) == 0);
#ifndef BOOTLOADER
/* light handling */
if (hold_button != hold_button_old)
{
hold_button_old = hold_button;
backlight_hold_changed(hold_button);
}
#endif /* BOOTLOADER */
if (hold_button) {
return 0;
}
/* direct GPIO connections */
if (GPIOA_PIN(3))
btn |= BUTTON_POWER;
/* DBOP buttons */
if(!(_dbop_din & (1<<2)))
btn |= BUTTON_LEFT;
if(!(_dbop_din & (1<<3)))
btn |= BUTTON_DOWN;
if(!(_dbop_din & (1<<4)))
btn |= BUTTON_SELECT;
if(!(_dbop_din & (1<<5)))
btn |= BUTTON_UP;
if(!(_dbop_din & (1<<6)))
btn |= BUTTON_RIGHT;
if(!(_dbop_din & (1<<13)))
btn |= BUTTON_VOL_UP;
if(!(_dbop_din & (1<<14)))
btn |= BUTTON_VOL_DOWN;
if(!(_dbop_din & (1<<15)))
btn |= BUTTON_REC;
return btn;
}