e69d567d9e
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19400 a1c6a512-1295-4272-9138-f99709370657
497 lines
14 KiB
C
497 lines
14 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2006 by Michael Sevakis
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include <stdlib.h>
|
|
#include "system.h"
|
|
#include "kernel.h"
|
|
#include "logf.h"
|
|
#include "audio.h"
|
|
#include "sound.h"
|
|
#if defined(HAVE_SPDIF_REC) || defined(HAVE_SPDIF_OUT)
|
|
#include "spdif.h"
|
|
#endif
|
|
|
|
#define IIS_PLAY_DEFPARM ( (freq_ent[FPARM_CLOCKSEL] << 12) | \
|
|
(IIS_PLAY & (7 << 8)) | \
|
|
(4 << 2) ) /* 64 bit clocks / word clock */
|
|
#define IIS_FIFO_RESET (1 << 11)
|
|
#define PDIR2_FIFO_RESET (1 << 9)
|
|
|
|
#if defined(IAUDIO_X5) || defined(IAUDIO_M5) || defined(IAUDIO_M3)
|
|
#define SET_IIS_PLAY(x) IIS1CONFIG = (x)
|
|
#define IIS_PLAY IIS1CONFIG
|
|
#else
|
|
#define SET_IIS_PLAY(x) IIS2CONFIG = (x)
|
|
#define IIS_PLAY IIS2CONFIG
|
|
#endif
|
|
|
|
struct dma_lock
|
|
{
|
|
int locked;
|
|
unsigned long state;
|
|
};
|
|
|
|
static bool is_playback_monitoring(void)
|
|
{
|
|
return (IIS_PLAY & (7 << 8)) == (3 << 8);
|
|
}
|
|
|
|
static void iis_play_reset_if_playback(bool if_playback)
|
|
{
|
|
bool is_playback = is_playback_monitoring();
|
|
|
|
if (is_playback != if_playback)
|
|
return;
|
|
|
|
or_l(IIS_FIFO_RESET, &IIS_PLAY);
|
|
}
|
|
|
|
#define PLLCR_SET_AUDIO_BITS_DEFPARM \
|
|
((freq_ent[FPARM_CLSEL] << 28) | (1 << 22))
|
|
|
|
/** Sample rates **/
|
|
#define FPARM_CLOCKSEL 0
|
|
#define FPARM_CLSEL 1
|
|
#if CONFIG_CPU == MCF5249 && defined(HAVE_UDA1380)
|
|
static const unsigned char pcm_freq_parms[HW_NUM_FREQ][2] =
|
|
{
|
|
[HW_FREQ_88] = { 0x0c, 0x01 },
|
|
[HW_FREQ_44] = { 0x06, 0x01 },
|
|
[HW_FREQ_22] = { 0x04, 0x02 },
|
|
[HW_FREQ_11] = { 0x02, 0x02 },
|
|
};
|
|
#endif
|
|
|
|
#if (CONFIG_CPU == MCF5250 || CONFIG_CPU == MCF5249) && defined(HAVE_TLV320)
|
|
static const unsigned char pcm_freq_parms[HW_NUM_FREQ][2] =
|
|
{
|
|
[HW_FREQ_88] = { 0x0c, 0x01 },
|
|
[HW_FREQ_44] = { 0x06, 0x01 },
|
|
[HW_FREQ_22] = { 0x04, 0x01 },
|
|
[HW_FREQ_11] = { 0x02, 0x02 },
|
|
};
|
|
#endif
|
|
|
|
static const unsigned char *freq_ent;
|
|
|
|
/* apply audio settings */
|
|
static bool _pcm_dma_apply_settings(bool clear_reset)
|
|
{
|
|
bool did_reset = false;
|
|
unsigned long iis_play_defparm;
|
|
|
|
int level = set_irq_level(DMA_IRQ_LEVEL);
|
|
|
|
/* remember table entry */
|
|
freq_ent = pcm_freq_parms[pcm_fsel];
|
|
|
|
iis_play_defparm = IIS_PLAY_DEFPARM;
|
|
|
|
if (pcm_sampr != pcm_curr_sampr)
|
|
{
|
|
/* Reprogramming bits 15-12 requires FIFO to be in a reset
|
|
condition - Users Manual 17-8, Note 11 */
|
|
or_l(IIS_FIFO_RESET, &IIS_PLAY);
|
|
/* Important for TLV320 - this must happen in the correct order
|
|
or starting recording will sound absolutely awful once in
|
|
awhile - audiohw_set_frequency then coldfire_set_pllcr_audio_bits
|
|
*/
|
|
SET_IIS_PLAY(IIS_PLAY_DEFPARM | IIS_FIFO_RESET);
|
|
audiohw_set_frequency(pcm_fsel);
|
|
coldfire_set_pllcr_audio_bits(PLLCR_SET_AUDIO_BITS_DEFPARM);
|
|
did_reset = true;
|
|
}
|
|
|
|
/* If a reset was done because of a sample rate change, IIS_PLAY will have
|
|
been set already, so only needs to be set again if the reset flag must
|
|
be cleared. If the frequency didn't change, it was never altered and
|
|
the reset flag can just be removed or no action taken. */
|
|
if (clear_reset)
|
|
SET_IIS_PLAY(IIS_PLAY_DEFPARM & ~IIS_FIFO_RESET);
|
|
|
|
restore_irq(level);
|
|
|
|
#if 0
|
|
logf("IISPLAY: %08X", IIS_PLAY);
|
|
#endif
|
|
|
|
return did_reset;
|
|
} /* _pcm_dma_apply_settings */
|
|
|
|
/* This clears the reset bit to enable monitoring immediately if monitoring
|
|
recording sources or always if playback is in progress - we might be
|
|
switching samplerates on the fly */
|
|
void pcm_dma_apply_settings(void)
|
|
{
|
|
int level = set_irq_level(DMA_IRQ_LEVEL);
|
|
bool pbm = is_playback_monitoring();
|
|
bool kick = (DCR0 & DMA_EEXT) != 0 && pbm;
|
|
|
|
/* Clear reset if not playback monitoring or peripheral request is
|
|
active and playback monitoring */
|
|
if (_pcm_dma_apply_settings(!pbm || kick) && kick)
|
|
PDOR3 = 0; /* Kick FIFO out of reset by writing to it */
|
|
|
|
restore_irq(level);
|
|
} /* pcm_dma_apply_settings */
|
|
|
|
void pcm_play_dma_init(void)
|
|
{
|
|
freq_ent = pcm_freq_parms[pcm_fsel];
|
|
|
|
AUDIOGLOB = (1 << 8) /* IIS1 fifo auto sync */
|
|
| (1 << 7) /* PDIR2 fifo auto sync */
|
|
#ifdef HAVE_SPDIF_OUT
|
|
| (1 << 10) /* EBU TX auto sync */
|
|
#endif
|
|
;
|
|
DIVR0 = 54; /* DMA0 is mapped into vector 54 in system.c */
|
|
and_l(0xffffff00, &DMAROUTE);
|
|
or_l(DMA0_REQ_AUDIO_1, &DMAROUTE);
|
|
DMACONFIG = 1; /* DMA0Req = PDOR3, DMA1Req = PDIR2 */
|
|
|
|
/* Call pcm_play_dma_stop to initialize everything. */
|
|
pcm_play_dma_stop();
|
|
|
|
/* Setup Coldfire I2S before initializing hardware or changing
|
|
other settings. */
|
|
or_l(IIS_FIFO_RESET, &IIS_PLAY);
|
|
SET_IIS_PLAY(IIS_PLAY_DEFPARM | IIS_FIFO_RESET);
|
|
audio_set_output_source(AUDIO_SRC_PLAYBACK);
|
|
|
|
/* Initialize default register values. */
|
|
audiohw_init();
|
|
|
|
audio_input_mux(AUDIO_SRC_PLAYBACK, SRCF_PLAYBACK);
|
|
|
|
audiohw_set_frequency(pcm_fsel);
|
|
coldfire_set_pllcr_audio_bits(PLLCR_SET_AUDIO_BITS_DEFPARM);
|
|
|
|
#if defined(HAVE_SPDIF_REC) || defined(HAVE_SPDIF_OUT)
|
|
spdif_init();
|
|
#endif
|
|
/* Enable interrupt at level 6, priority 0 */
|
|
ICR6 = (6 << 2);
|
|
} /* pcm_play_dma_init */
|
|
|
|
void pcm_postinit(void)
|
|
{
|
|
audiohw_postinit();
|
|
}
|
|
|
|
/** DMA **/
|
|
|
|
/****************************************************************************
|
|
** Playback DMA transfer
|
|
**/
|
|
/* For the locks, DMA interrupt must be disabled when manipulating the lock
|
|
if the handler ever calls these - right now things are arranged so it
|
|
doesn't */
|
|
static struct dma_lock dma_play_lock =
|
|
{
|
|
.locked = 0,
|
|
.state = (0 << 14) /* bit 14 is DMA0 */
|
|
};
|
|
|
|
void pcm_play_lock(void)
|
|
{
|
|
if (++dma_play_lock.locked == 1)
|
|
or_l((1 << 14), &IMR);
|
|
}
|
|
|
|
void pcm_play_unlock(void)
|
|
{
|
|
if (--dma_play_lock.locked == 0)
|
|
and_l(~dma_play_lock.state, &IMR);
|
|
}
|
|
|
|
/* Set up the DMA transfer that kicks in when the audio FIFO gets empty */
|
|
void pcm_play_dma_start(const void *addr, size_t size)
|
|
{
|
|
logf("pcm_play_dma_start");
|
|
|
|
/* stop any DMA in progress */
|
|
DSR0 = 1;
|
|
DCR0 = 0;
|
|
|
|
/* Set up DMA transfer */
|
|
SAR0 = (unsigned long)addr; /* Source address */
|
|
DAR0 = (unsigned long)&PDOR3; /* Destination address */
|
|
BCR0 = (unsigned long)size; /* Bytes to transfer */
|
|
|
|
/* Enable the FIFO and force one write to it */
|
|
_pcm_dma_apply_settings(is_playback_monitoring());
|
|
|
|
DCR0 = DMA_INT | DMA_EEXT | DMA_CS | DMA_AA |
|
|
DMA_SINC | DMA_SSIZE(DMA_SIZE_LINE) | DMA_START;
|
|
|
|
dma_play_lock.state = (1 << 14);
|
|
} /* pcm_play_dma_start */
|
|
|
|
/* Stops the DMA transfer and interrupt */
|
|
void pcm_play_dma_stop(void)
|
|
{
|
|
DSR0 = 1;
|
|
DCR0 = 0;
|
|
BCR0 = 0;
|
|
|
|
/* Place TX FIFO in reset condition if playback monitoring is on.
|
|
Recording monitoring something else should not be stopped. */
|
|
iis_play_reset_if_playback(true);
|
|
|
|
dma_play_lock.state = (0 << 14);
|
|
} /* pcm_play_dma_stop */
|
|
|
|
void pcm_play_dma_pause(bool pause)
|
|
{
|
|
if (pause)
|
|
{
|
|
/* pause playback on current buffer */
|
|
and_l(~DMA_EEXT, &DCR0);
|
|
iis_play_reset_if_playback(true);
|
|
dma_play_lock.state = (0 << 14);
|
|
}
|
|
else
|
|
{
|
|
/* restart playback on current buffer */
|
|
/* Enable the FIFO and force one write to it */
|
|
_pcm_dma_apply_settings(is_playback_monitoring());
|
|
or_l(DMA_EEXT | DMA_START, &DCR0);
|
|
dma_play_lock.state = (1 << 14);
|
|
}
|
|
} /* pcm_play_dma_pause */
|
|
|
|
size_t pcm_get_bytes_waiting(void)
|
|
{
|
|
return BCR0 & 0xffffff;
|
|
} /* pcm_get_bytes_waiting */
|
|
|
|
/* DMA0 Interrupt is called when the DMA has finished transfering a chunk
|
|
from the caller's buffer */
|
|
void DMA0(void) __attribute__ ((interrupt_handler, section(".icode")));
|
|
void DMA0(void)
|
|
{
|
|
int res = DSR0;
|
|
|
|
DSR0 = 1; /* Clear interrupt */
|
|
and_l(~DMA_EEXT, &DCR0); /* Disable peripheral request */
|
|
/* Stop on error */
|
|
if ((res & 0x70) == 0)
|
|
{
|
|
pcm_more_callback_type get_more = pcm_callback_for_more;
|
|
unsigned char *next_start;
|
|
size_t next_size = 0;
|
|
|
|
if (get_more)
|
|
get_more(&next_start, &next_size);
|
|
|
|
if (next_size > 0)
|
|
{
|
|
SAR0 = (unsigned long)next_start; /* Source address */
|
|
BCR0 = next_size; /* Bytes to transfer */
|
|
or_l(DMA_EEXT, &DCR0); /* Enable peripheral request */
|
|
return;
|
|
}
|
|
else
|
|
{
|
|
/* Finished playing */
|
|
#if 0
|
|
/* int. logfs can trash the display */
|
|
logf("DMA0 No Data:0x%04x", res);
|
|
#endif
|
|
}
|
|
}
|
|
else
|
|
{
|
|
logf("DMA0 err: %02x", res);
|
|
#if 0
|
|
logf(" SAR0: %08x", SAR0);
|
|
logf(" DAR0: %08x", DAR0);
|
|
logf(" BCR0: %08x", BCR0);
|
|
logf(" DCR0: %08x", DCR0);
|
|
#endif
|
|
}
|
|
|
|
/* Stop interrupt and futher transfers */
|
|
pcm_play_dma_stop();
|
|
/* Inform PCM that we're done */
|
|
pcm_play_dma_stopped_callback();
|
|
} /* DMA0 */
|
|
|
|
const void * pcm_play_dma_get_peak_buffer(int *count)
|
|
{
|
|
unsigned long addr = SAR0;
|
|
int cnt = BCR0;
|
|
*count = (cnt & 0xffffff) >> 2;
|
|
return (void *)((addr + 2) & ~3);
|
|
} /* pcm_play_dma_get_peak_buffer */
|
|
|
|
/****************************************************************************
|
|
** Recording DMA transfer
|
|
**/
|
|
static struct dma_lock dma_rec_lock =
|
|
{
|
|
.locked = 0,
|
|
.state = (0 << 15) /* bit 15 is DMA1 */
|
|
};
|
|
|
|
/* For the locks, DMA interrupt must be disabled when manipulating the lock
|
|
if the handler ever calls these - right now things are arranged so it
|
|
doesn't */
|
|
void pcm_rec_lock(void)
|
|
{
|
|
if (++dma_rec_lock.locked == 1)
|
|
or_l((1 << 15), &IMR);
|
|
}
|
|
|
|
void pcm_rec_unlock(void)
|
|
{
|
|
if (--dma_rec_lock.locked == 0)
|
|
and_l(~dma_rec_lock.state, &IMR);
|
|
}
|
|
|
|
void pcm_rec_dma_start(void *addr, size_t size)
|
|
{
|
|
/* stop any DMA in progress */
|
|
and_l(~DMA_EEXT, &DCR1);
|
|
DSR1 = 1;
|
|
|
|
and_l(~PDIR2_FIFO_RESET, &DATAINCONTROL);
|
|
/* Clear TX FIFO reset bit if the source is not set to monitor playback
|
|
otherwise maintain independence between playback and recording. */
|
|
_pcm_dma_apply_settings(!is_playback_monitoring());
|
|
|
|
/* Start the DMA transfer.. */
|
|
#ifdef HAVE_SPDIF_REC
|
|
/* clear: ebu1cnew, valnogood, symbolerr, parityerr */
|
|
INTERRUPTCLEAR = (1 << 25) | (1 << 24) | (1 << 23) | (1 << 22);
|
|
#endif
|
|
|
|
SAR1 = (unsigned long)&PDIR2; /* Source address */
|
|
pcm_rec_peak_addr = (unsigned long *)addr; /* Start peaking at dest */
|
|
DAR1 = (unsigned long)addr; /* Destination address */
|
|
BCR1 = (unsigned long)size; /* Bytes to transfer */
|
|
|
|
DCR1 = DMA_INT | DMA_EEXT | DMA_CS | DMA_AA | DMA_DINC |
|
|
DMA_DSIZE(DMA_SIZE_LINE) | DMA_START;
|
|
|
|
dma_rec_lock.state = (1 << 15);
|
|
} /* pcm_rec_dma_start */
|
|
|
|
void pcm_rec_dma_stop(void)
|
|
{
|
|
DSR1 = 1; /* Clear interrupt */
|
|
DCR1 = 0;
|
|
BCR1 = 0;
|
|
or_l(PDIR2_FIFO_RESET, &DATAINCONTROL);
|
|
|
|
iis_play_reset_if_playback(false);
|
|
|
|
dma_rec_lock.state = (0 << 15);
|
|
} /* pcm_rec_dma_stop */
|
|
|
|
void pcm_rec_dma_init(void)
|
|
{
|
|
DIVR1 = 55; /* DMA1 is mapped into vector 55 in system.c */
|
|
DMACONFIG = 1; /* DMA0Req = PDOR3, DMA1Req = PDIR2 */
|
|
and_l(0xffff00ff, &DMAROUTE);
|
|
or_l(DMA1_REQ_AUDIO_2, &DMAROUTE);
|
|
|
|
pcm_rec_dma_stop();
|
|
|
|
/* Enable interrupt at level 6, priority 1 */
|
|
ICR7 = (6 << 2) | (1 << 0);
|
|
} /* pcm_init_recording */
|
|
|
|
void pcm_rec_dma_close(void)
|
|
{
|
|
and_l(0xffff00ff, &DMAROUTE);
|
|
ICR7 = 0x00; /* Disable interrupt */
|
|
dma_rec_lock.state = (0 << 15);
|
|
} /* pcm_rec_dma_close */
|
|
|
|
/* DMA1 Interrupt is called when the DMA has finished transfering a chunk
|
|
into the caller's buffer */
|
|
void DMA1(void) __attribute__ ((interrupt_handler, section(".icode")));
|
|
void DMA1(void)
|
|
{
|
|
int res = DSR1;
|
|
int status = 0;
|
|
pcm_more_callback_type2 more_ready;
|
|
|
|
DSR1 = 1; /* Clear interrupt */
|
|
and_l(~DMA_EEXT, &DCR1); /* Disable peripheral request */
|
|
|
|
if (res & 0x70)
|
|
{
|
|
status = DMA_REC_ERROR_DMA;
|
|
logf("DMA1 err: %02x", res);
|
|
#if 0
|
|
logf(" SAR1: %08x", SAR1);
|
|
logf(" DAR1: %08x", DAR1);
|
|
logf(" BCR1: %08x", BCR1);
|
|
logf(" DCR1: %08x", DCR1);
|
|
#endif
|
|
}
|
|
#ifdef HAVE_SPDIF_REC
|
|
else if (DATAINCONTROL == 0xc038 &&
|
|
(INTERRUPTSTAT & ((1 << 23) | (1 << 22))))
|
|
{
|
|
/* reason: symbolerr, parityerr.
|
|
* Ignore valnogood since several sources don't set it properly. */
|
|
/* clear: ebu1cnew, symbolerr, parityerr */
|
|
INTERRUPTCLEAR = (1 << 25) | (1 << 23) | (1 << 22);
|
|
status = DMA_REC_ERROR_SPDIF;
|
|
logf("spdif err");
|
|
}
|
|
#endif
|
|
|
|
more_ready = pcm_callback_more_ready;
|
|
|
|
if (more_ready != NULL && more_ready(status) >= 0)
|
|
return;
|
|
|
|
#if 0
|
|
/* int. logfs can trash the display */
|
|
logf("DMA1 done:%04x %d", res, status);
|
|
#endif
|
|
/* Finished recording */
|
|
pcm_rec_dma_stop();
|
|
/* Inform PCM that we're done */
|
|
pcm_rec_dma_stopped_callback();
|
|
} /* DMA1 */
|
|
|
|
/* Continue transferring data in - call from interrupt callback */
|
|
void pcm_record_more(void *start, size_t size)
|
|
{
|
|
pcm_rec_peak_addr = (unsigned long *)start; /* Start peaking at dest */
|
|
DAR1 = (unsigned long)start; /* Destination address */
|
|
BCR1 = (unsigned long)size; /* Bytes to transfer */
|
|
or_l(DMA_EEXT, &DCR1); /* Enable peripheral request */
|
|
} /* pcm_record_more */
|
|
|
|
const void * pcm_rec_dma_get_peak_buffer(int *count)
|
|
{
|
|
unsigned long addr = (unsigned long)pcm_rec_peak_addr;
|
|
unsigned long end = DAR1;
|
|
addr >>= 2;
|
|
*count = (end >> 2) - addr;
|
|
return (void *)(addr << 2);
|
|
} /* pcm_rec_dma_get_peak_buffer */
|