rockbox/firmware/target/arm/as3525/powermgmt-as3525.c
Rafaël Carré 6b566568eb Fix Clip firmware building by adding missing symbols
Implement some of the new functions
Use as3514 rtc
Add AS3525 case in rolo.c
Copy card_get_info_target() from ata-sd-pp.c , and use the correct 32bits words order

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19064 a1c6a512-1295-4272-9138-f99709370657
2008-11-10 11:04:43 +00:00

56 lines
1.7 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright © 2008 Rafaël Carré
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "adc.h"
#include "powermgmt.h"
/* TODO */
const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] =
{
0
};
const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] =
{
0
};
/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
{
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
};
#if CONFIG_CHARGING
/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
const unsigned short percent_to_volt_charge[11] =
{
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1
};
#endif /* CONFIG_CHARGING */
/* Returns battery voltage from ADC [millivolts] */
unsigned int battery_adc_voltage(void)
{
return 1;
}