..
audio
as3514.c: clean up
2010-05-19 17:30:38 +00:00
rtc
i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.
2010-05-04 10:07:53 +00:00
tuner
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
2010-05-06 21:04:40 +00:00
ata.c
Do s/SWAP_WORDS/ATA_SWAP_WORDS/ to prevent namespace clashes.
2010-05-17 15:15:38 +00:00
ata_flash.c
Commit FS#9545, storage cleanup and multi-driver support
2009-07-17 22:28:49 +00:00
ata_mmc.c
Simplify some expressions using the ? operator
2010-01-01 22:47:25 +00:00
button.c
Revert r26055 since it breaks certain Archos targets.
2010-05-15 21:27:22 +00:00
dac.c
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
dac.h
Final removal of tabs in firmware path
2010-01-03 11:31:14 +00:00
eeprom_24cxx.c
Various files: make function implementations consistent with their declaration in the header file or static if
2009-01-31 23:51:11 +00:00
fat.c
Add IO priority handling. Currently all IO has equal priority, except the dircache scanning thread which is lower. This fixes the slow boot problem for me, with the added benefit that actual audio playback also starts faster.
2010-04-03 22:02:09 +00:00
fmradio.c
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
generic_i2c.c
Fix delays in generic i2c driver, reduce delays in ams sansa fmradio i2c driver (tested on m200v4, clip, e200v2, fuze).
2009-06-20 21:45:04 +00:00
i2c.c
Add missing mutex_init to i2c driver
2009-07-10 17:46:35 +00:00
isp1362.c
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
isp1583.c
FS#10226 - isp1583.c code cosmetics
2009-10-01 05:40:20 +00:00
lcd-1bit-vert.c
Rename sdl lcd initialization to (remote_)lcd_init_device which enables removing two #ifdef SIMULATOR and makes it happen as on target.
2010-05-18 12:27:20 +00:00
lcd-2bit-horz.c
Comment out lcd_drawline() DEBUGF messages which show in various simulators
2010-02-20 06:42:45 +00:00
lcd-2bit-vert.c
Comment out lcd_drawline() DEBUGF messages which show in various simulators
2010-02-20 06:42:45 +00:00
lcd-2bit-vi.c
Rename sdl lcd initialization to (remote_)lcd_init_device which enables removing two #ifdef SIMULATOR and makes it happen as on target.
2010-05-18 12:27:20 +00:00
lcd-16bit-vert.c
Comment out lcd_drawline() DEBUGF messages which show in various simulators
2010-02-20 06:42:45 +00:00
lcd-16bit.c
Comment out lcd_drawline() DEBUGF messages which show in various simulators
2010-02-20 06:42:45 +00:00
lcd-bitmap-common.c
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
2010-05-06 21:04:40 +00:00
lcd-charcell.c
Fix remaining reds/yellows.
2010-05-14 13:21:40 +00:00
lcd-charset-player.c
Final removal of tabs in firmware path
2010-01-03 11:31:14 +00:00
lcd-remote-1bit-v.c
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
lcd-remote-2bit-vi.c
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
led.c
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
m5636.c
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
m66591.c
M66591 Driver: Correct some comments.
2010-03-17 01:43:15 +00:00
mas.c
Moved pcm_record from firmware to apps. Cleaned up some. Now all code using struct mp3entry is in apps.
2008-10-14 11:12:20 +00:00
nand_id.c
TCC NAND: The BLOCKS_PER_SEGMENT define was actually the number of planes mentioned in the Samsung NAND datasheet. Add this to the nand_id struct, so that it can be runtime detected (required for some D2s to boot). Use the struct directly instead of making a local copy, and format the nand_info table to 80 columns.
2009-03-02 23:36:12 +00:00
pcf50605.c
Ensure consistency between header file and implementation for iPod drivers, by #including the appropriate header file and #ifdef'fing out unused code
2008-07-16 11:02:14 +00:00
pcf50606.c
D2: Reduce binsize a bit by using arrays for the PMU initialisation.
2009-10-11 21:12:06 +00:00
pcf50635.c
D2: Reduce binsize a bit by using arrays for the PMU initialisation.
2009-10-11 21:12:06 +00:00
qt1106.c
Make the meizu m3 load from flash, so interrupts work. More work is needed to get the m6sl "working" again
2008-10-18 22:28:59 +00:00
ramdisk.c
Commit FS#9545, storage cleanup and multi-driver support
2009-07-17 22:28:49 +00:00
sd.c
Fix warnings on logf build
2009-12-25 18:27:26 +00:00
serial.c
Simplify some boolean expressions that compare directly against 'true'
2010-01-02 16:03:30 +00:00
sw_i2c.c
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
synaptics-mep.c
Packard Bell Vibe 500: touchpad code rework. Improve touch sensivity a bit by setting the MEP parameters in the power_init() function. Implement new function in synaptics-mep driver (touchpad_set_parameter) necessary for it. Move the button lights code to the target backlight file.
2010-02-06 19:15:43 +00:00
touchscreen.c
Remove svn:executable from firmware
2009-10-31 02:26:40 +00:00
tsc200x.c
Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller).
2009-10-15 20:13:29 +00:00
tsc2100.c
M:Robe 500: Fix FIQ's and make the audio DMA a FIQ, simplify the ADC code and make it more reliable. Fix ADC problems on initial boot.
2009-12-12 18:36:52 +00:00
9c774b3849