Jens Arnold 68a21689ae Consistent naming scheme the various blit functions. * Removed lcd_blit_mono() for colour targets. Plugin API became incompatible, so sort, clean up & bump. * Implemented lcd_blit_mono() for M3. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16775 a1c6a512-1295-4272-9138-f99709370657		2008-03-24 00:35:53 +00:00
..
adc-h100.c	Coldfire: Partially revert buffered writes, and enable them explicitly for the LCD only. Turned out that with buffered writes enabled, reads after writes are not always serialized, which is a bad thing for I/O. Buffered writes to the LCD are safe because that's write-only. Fixes FS #7985. How come I didn't notice this earlier? :>	2007-10-17 20:45:13 +00:00
adc-target.h	H1x0, H300: Get rid of the adc tick, and use the same concept as the iAudio ADC driver.	2007-07-30 19:13:59 +00:00
backlight-h100.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
backlight-target.h	Fix bootloaders, and the backlight-modded Ondio build.	2007-11-12 19:19:38 +00:00
button-h100.c
lcd-as-h100.S	Fix graphical glitches occuring in the greyscale library on H1x0 and M5 at 124MHz. The main loop within lcd_grey_data() needed instruction reordering (interspersing lcd writes with memory accesses) to meed the LCD controller timing. Slight slowdown because of the extra register needed.	2008-01-15 00:51:58 +00:00
lcd-h100.c	Consistent naming scheme the various blit functions. * Removed lcd_blit_mono() for colour targets. Plugin API became incompatible, so sort, clean up & bump. * Implemented lcd_blit_mono() for M3.	2008-03-24 00:35:53 +00:00
power-h100.c	Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.	2007-08-14 22:06:23 +00:00
powermgmt-h100.c	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
spdif-h100.c
usb-h100.c	FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.	2007-09-04 08:03:07 +00:00