rockbox/firmware/target/arm/as3525/sansa-clipv2/powermgmt-clipv2.c
Rafaël Carré 7d8c02d105 Clip+: add charging curve
Charge using 150mA current like the OF to charge faster
Edit clipv2 charging curve with 150mA

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26227 a1c6a512-1295-4272-9138-f99709370657
2010-05-21 12:48:15 +00:00

49 lines
1.7 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright © 2008 Rafaël Carré
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
/* The battery manufacturer's website shows discharge curves down to 3.0V,
so 'dangerous' and 'shutoff' levels of 3.4V and 3.3V should be safe.
*/
const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] =
{
3400
};
const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] =
{
3300
};
/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
{
{ 3300, 3692, 3740, 3772, 3798, 3828, 3876, 3943, 4013, 4094, 4194 }
};
#if CONFIG_CHARGING
/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
const unsigned short percent_to_volt_charge[11] =
{
3417, 3802, 3856, 3888, 3905, 3931, 3973, 4025, 4084, 4161, 4219
};
#endif /* CONFIG_CHARGING */