rockbox/utils/hwstub/stub/system.h
Amaury Pouly 2cdfc43f10 hwstub: implement read/write data abort recovery
Change-Id: I1625873b6864584c40984723d82548ad242ee08e
2015-01-13 23:35:33 +01:00

120 lines
3.4 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2012 by Amaury Pouly
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef __HWSTUB_SYSTEM__
#define __HWSTUB_SYSTEM__
#define IRQ_ENABLED 0x00
#define IRQ_DISABLED 0x80
#define IRQ_STATUS 0x80
#define FIQ_ENABLED 0x00
#define FIQ_DISABLED 0x40
#define FIQ_STATUS 0x40
#define IRQ_FIQ_ENABLED 0x00
#define IRQ_FIQ_DISABLED 0xc0
#define IRQ_FIQ_STATUS 0xc0
#define HIGHEST_IRQ_LEVEL IRQ_DISABLED
#define set_irq_level(status) \
set_interrupt_status((status), IRQ_STATUS)
#define set_fiq_status(status) \
set_interrupt_status((status), FIQ_STATUS)
#define disable_irq_save() \
disable_interrupt_save(IRQ_STATUS)
#define disable_fiq_save() \
disable_interrupt_save(FIQ_STATUS)
#define restore_irq(cpsr) \
restore_interrupt(cpsr)
#define restore_fiq(cpsr) \
restore_interrupt(cpsr)
#define disable_irq() \
disable_interrupt(IRQ_STATUS)
#define enable_irq() \
enable_interrupt(IRQ_STATUS)
#define disable_fiq() \
disable_interrupt(FIQ_STATUS)
#define enable_fiq() \
enable_interrupt(FIQ_STATUS)
static inline int set_interrupt_status(int status, int mask)
{
unsigned long cpsr;
int oldstatus;
/* Read the old levels and set the new ones */
asm volatile (
"mrs %1, cpsr \n"
"bic %0, %1, %[mask] \n"
"orr %0, %0, %2 \n"
"msr cpsr_c, %0 \n"
: "=&r,r"(cpsr), "=&r,r"(oldstatus)
: "r,i"(status & mask), [mask]"i,i"(mask));
return oldstatus;
}
static inline void restore_interrupt(int cpsr)
{
/* Set cpsr_c from value returned by disable_interrupt_save
* or set_interrupt_status */
asm volatile ("msr cpsr_c, %0" : : "r"(cpsr));
}
static inline void enable_interrupt(int mask)
{
/* Clear I and/or F disable bit */
int tmp;
asm volatile (
"mrs %0, cpsr \n"
"bic %0, %0, %1 \n"
"msr cpsr_c, %0 \n"
: "=&r"(tmp) : "i"(mask));
}
static inline void disable_interrupt(int mask)
{
/* Set I and/or F disable bit */
int tmp;
asm volatile (
"mrs %0, cpsr \n"
"orr %0, %0, %1 \n"
"msr cpsr_c, %0 \n"
: "=&r"(tmp) : "i"(mask));
}
static inline int disable_interrupt_save(int mask)
{
/* Set I and/or F disable bit and return old cpsr value */
int cpsr, tmp;
asm volatile (
"mrs %1, cpsr \n"
"orr %0, %1, %2 \n"
"msr cpsr_c, %0 \n"
: "=&r"(tmp), "=&r"(cpsr)
: "i"(mask));
return cpsr;
}
int set_data_abort_jmp(void);
#endif /* __HWSTUB_SYSTEM__ */