52ca187f68
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23345 a1c6a512-1295-4272-9138-f99709370657
470 lines
14 KiB
C
470 lines
14 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2009 Bertrik Sikken
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include <inttypes.h>
|
|
|
|
#include "config.h"
|
|
#include "s5l8700.h"
|
|
#include "lcd.h"
|
|
|
|
/* LCD driver for the Meizu M6 SP using the CLCD controller in the S5L8700
|
|
|
|
The Meizu M6 SP can have two different LCDs, the S6D0139 and another
|
|
(yet unknown) type, the exact type is detected at run-time.
|
|
|
|
Open issues:
|
|
* LCD is currently in portrait mode instead of landscape mode
|
|
* This LCD driver accesses the Rockbox framebuffer directly, so any changes
|
|
to the framebuffer as shown directly even before lcd_update is called.
|
|
* Sometimes part of the top of the screen appears at the bottom
|
|
* The Meizu seems to hang after LCD initialisation
|
|
* The driver for the S6D0139 LCD has not been tested yet
|
|
|
|
*/
|
|
|
|
/* LCD SPI connections */
|
|
#define LCD_SPI_SSn (1<<1) /* on PDAT7 */
|
|
#define LCD_SPI_MISO (1<<2) /* on PDAT3 */
|
|
#define LCD_SPI_MOSI (1<<6) /* on PDAT3 */
|
|
#define LCD_SPI_SCLK (1<<7) /* on PDAT3 */
|
|
|
|
/* LCD SPI communication definitions */
|
|
#define LCD_SPI_DEVICE_ID (0x1D<<2)
|
|
#define LCD_SPI_INDEX_WRITE (LCD_SPI_DEVICE_ID|0)
|
|
#define LCD_SPI_STATUS_READ (LCD_SPI_DEVICE_ID|1)
|
|
#define LCD_SPI_DATA_WRITE (LCD_SPI_DEVICE_ID|2)
|
|
#define LCD_SPI_DATA_READ (LCD_SPI_DEVICE_ID|3)
|
|
|
|
#define LCD_TYPE1_ID 0x139 /* id for LCD type S6D0139 */
|
|
|
|
static int lcd_type = 0;
|
|
|
|
/* simple and crude delay */
|
|
static void lcd_delay(int count)
|
|
{
|
|
volatile int i;
|
|
for (i = 0; i < count; i++);
|
|
}
|
|
|
|
/* write 'data_out' of length 'bits' over SPI and return received data */
|
|
static unsigned int lcd_spi_transfer(int bits, unsigned int data_out)
|
|
{
|
|
unsigned int data_in = 0;
|
|
|
|
/* SSn active */
|
|
PDAT7 &= ~LCD_SPI_SSn;
|
|
lcd_delay(10);
|
|
|
|
/* send and receive data */
|
|
while (bits--) {
|
|
/* CLK low */
|
|
PDAT3 &= ~LCD_SPI_SCLK;
|
|
|
|
/* set MOSI */
|
|
if (data_out & (1 << bits)) {
|
|
PDAT3 |= LCD_SPI_MOSI;
|
|
}
|
|
else {
|
|
PDAT3 &= ~LCD_SPI_MOSI;
|
|
}
|
|
|
|
/* delay */
|
|
lcd_delay(10);
|
|
|
|
/* sample MISO */
|
|
data_in <<= 1;
|
|
if (PDAT3 & LCD_SPI_MISO) {
|
|
data_in |= 1;
|
|
}
|
|
|
|
/* CLK high */
|
|
PDAT3 |= LCD_SPI_SCLK;
|
|
|
|
/* delay */
|
|
lcd_delay(10);
|
|
}
|
|
|
|
/* SSn inactive */
|
|
PDAT7 |= LCD_SPI_SSn;
|
|
lcd_delay(10);
|
|
|
|
return data_in;
|
|
}
|
|
|
|
/* initialize the lcd SPI port interface */
|
|
static void lcd_spi_init(void)
|
|
{
|
|
/* configure SSn (P7.1) as output */
|
|
PCON7 = (PCON7 & ~0x000000F0) | 0x00000010;
|
|
|
|
/* configure MISO (P3.2) input, MOSI (P3.6) output, SCLK (P3.7) output */
|
|
PCON3 = (PCON3 & ~0xFF000F00) | 0x11000000;
|
|
|
|
/* set all outputs high */
|
|
PDAT7 |= LCD_SPI_SSn;
|
|
PDAT3 |= (LCD_SPI_MOSI | LCD_SPI_SCLK);
|
|
}
|
|
|
|
/* read LCD identification word over SPI */
|
|
static unsigned int lcd_read_reg(unsigned reg)
|
|
{
|
|
unsigned int data;
|
|
|
|
lcd_spi_transfer(24, (LCD_SPI_INDEX_WRITE << 16) | reg);
|
|
data = lcd_spi_transfer(24, (LCD_SPI_DATA_READ << 16));
|
|
return data & 0xFFFF;
|
|
}
|
|
|
|
/* write LCD register over SPI */
|
|
static void lcd_write_reg(unsigned char reg, unsigned int data)
|
|
{
|
|
lcd_spi_transfer(24, (LCD_SPI_INDEX_WRITE << 16) | reg);
|
|
lcd_spi_transfer(24, (LCD_SPI_DATA_WRITE << 16) | data);
|
|
}
|
|
|
|
/* enable/disable clock signals towards the lcd */
|
|
static void lcd_controller_power(bool on)
|
|
{
|
|
if (on) {
|
|
LCDCON1 |= 0x80003;
|
|
}
|
|
else {
|
|
LCDCON1 &= ~0x80003;
|
|
}
|
|
}
|
|
|
|
/* lcd init configuration for lcd type 1 */
|
|
static void lcd_init1(void)
|
|
{
|
|
lcd_write_reg(0x07, 0x0000); /* display control */
|
|
lcd_write_reg(0x13, 0x0000); /* power control 3 */
|
|
lcd_delay(166670);
|
|
|
|
lcd_write_reg(0x11, 0x3304); /* power control 2 */
|
|
lcd_write_reg(0x14, 0x1300); /* power control 4 */
|
|
lcd_write_reg(0x10, 0x1A20); /* power control 1 */
|
|
lcd_write_reg(0x13, 0x0040); /* power control 3 */
|
|
lcd_delay(833350);
|
|
|
|
lcd_write_reg(0x13, 0x0060); /* power control 3 */
|
|
lcd_write_reg(0x13, 0x0070); /* power control 3 */
|
|
lcd_delay(3333400);
|
|
|
|
lcd_write_reg(0x01, 0x0127); /* driver output control */
|
|
lcd_write_reg(0x02, 0x0700); /* lcd driving waveform control */
|
|
lcd_write_reg(0x03, 0x1030); /* entry mode */
|
|
lcd_write_reg(0x08, 0x0208); /* blank period control 1 */
|
|
lcd_write_reg(0x0B, 0x0620); /* frame cycle control */
|
|
lcd_write_reg(0x0C, 0x0110); /* external interface control */
|
|
lcd_write_reg(0x30, 0x0120); /* gamma control 1 */
|
|
lcd_write_reg(0x31, 0x0117); /* gamma control 2 */
|
|
lcd_write_reg(0x32, 0x0000); /* gamma control 3 */
|
|
lcd_write_reg(0x33, 0x0305); /* gamma control 4 */
|
|
lcd_write_reg(0x34, 0x0717); /* gamma control 5 */
|
|
lcd_write_reg(0x35, 0x0124); /* gamma control 6 */
|
|
lcd_write_reg(0x36, 0x0706); /* gamma control 7 */
|
|
lcd_write_reg(0x37, 0x0503); /* gamma control 8 */
|
|
lcd_write_reg(0x38, 0x1F03); /* gamma control 9 */
|
|
lcd_write_reg(0x39, 0x0009); /* gamma control 10 */
|
|
lcd_write_reg(0x40, 0x0000); /* gate scan position */
|
|
lcd_write_reg(0x41, 0x0000); /* vertical scroll control */
|
|
lcd_write_reg(0x42, 0x013F); /* 1st screen driving position (end) */
|
|
lcd_write_reg(0x43, 0x0000); /* 1st screen driving position (start) */
|
|
lcd_write_reg(0x44, 0x013F); /* 2nd screen driving position (end) */
|
|
lcd_write_reg(0x45, 0x0000); /* 2nd screen driving position (start) */
|
|
lcd_write_reg(0x46, 0xEF00); /* horizontal window address */
|
|
lcd_write_reg(0x47, 0x013F); /* vertical window address (end) */
|
|
lcd_write_reg(0x48, 0x0000); /* vertical window address (start) */
|
|
|
|
lcd_write_reg(0x07, 0x0015); /* display control */
|
|
lcd_delay(500000);
|
|
lcd_write_reg(0x07, 0x0017); /* display control */
|
|
|
|
lcd_write_reg(0x20, 0x0000); /* RAM address set (low part) */
|
|
lcd_write_reg(0x21, 0x0000); /* RAM address set (high part) */
|
|
lcd_write_reg(0x22, 0x0000); /* write data to GRAM */
|
|
}
|
|
|
|
/* lcd init configuration for lcd type 2 */
|
|
static void lcd_init2(void)
|
|
{
|
|
lcd_write_reg(0x07, 0x0000);
|
|
lcd_write_reg(0x12, 0x0000);
|
|
lcd_delay(166670);
|
|
|
|
lcd_write_reg(0x11, 0x000C);
|
|
lcd_write_reg(0x12, 0x0A1C);
|
|
lcd_write_reg(0x13, 0x0022);
|
|
lcd_write_reg(0x14, 0x0000);
|
|
|
|
lcd_write_reg(0x10, 0x7404);
|
|
lcd_write_reg(0x11, 0x0738);
|
|
lcd_write_reg(0x10, 0x7404);
|
|
lcd_delay(833350);
|
|
|
|
lcd_write_reg(0x07, 0x0009);
|
|
lcd_write_reg(0x12, 0x065C);
|
|
lcd_delay(3333400);
|
|
|
|
lcd_write_reg(0x01, 0xE127);
|
|
lcd_write_reg(0x02, 0x0300);
|
|
lcd_write_reg(0x03, 0x1100);
|
|
lcd_write_reg(0x08, 0x0008);
|
|
lcd_write_reg(0x0B, 0x0000);
|
|
lcd_write_reg(0x0C, 0x0000);
|
|
lcd_write_reg(0x0D, 0x0007);
|
|
lcd_write_reg(0x15, 0x0003);
|
|
lcd_write_reg(0x16, 0x0014);
|
|
lcd_write_reg(0x17, 0x0000);
|
|
|
|
lcd_write_reg(0x30, 0x0503); /* gamma? */
|
|
lcd_write_reg(0x31, 0x0303);
|
|
lcd_write_reg(0x32, 0x0305);
|
|
lcd_write_reg(0x33, 0x0202);
|
|
lcd_write_reg(0x34, 0x0204);
|
|
lcd_write_reg(0x35, 0x0404);
|
|
lcd_write_reg(0x36, 0x0402);
|
|
lcd_write_reg(0x37, 0x0202);
|
|
lcd_write_reg(0x38, 0x1000);
|
|
lcd_write_reg(0x39, 0x1000);
|
|
|
|
lcd_write_reg(0x07, 0x0009);
|
|
lcd_delay(666680);
|
|
|
|
lcd_write_reg(0x07, 0x0109);
|
|
lcd_delay(666680);
|
|
|
|
lcd_write_reg(0x07, 0x010B);
|
|
}
|
|
|
|
/* lcd enable for lcd type 1 */
|
|
static void lcd_enable1(bool on)
|
|
{
|
|
if (on) {
|
|
lcd_write_reg(0x00, 0x0001); /* start oscillation */
|
|
lcd_delay(166670);
|
|
lcd_write_reg(0x10, 0x0000); /* power control 1 */
|
|
lcd_delay(166670);
|
|
|
|
lcd_write_reg(0x11, 0x3304); /* power control 2 */
|
|
lcd_write_reg(0x14, 0x1300); /* power control 4 */
|
|
lcd_write_reg(0x10, 0x1A20); /* power control 1 */
|
|
lcd_write_reg(0x07, 0x0015); /* display control */
|
|
lcd_delay(500000);
|
|
|
|
lcd_write_reg(0x20, 0x0000); /* RAM address set (low part) */
|
|
lcd_write_reg(0x21, 0x0000); /* RAM address set (high part) */
|
|
lcd_write_reg(0x22, 0x0000); /* write data to GRAM */
|
|
}
|
|
else {
|
|
lcd_write_reg(0x07, 0x0016); /* display control */
|
|
lcd_delay(166670 * 4);
|
|
lcd_write_reg(0x07, 0x0004); /* display control */
|
|
lcd_delay(166670 * 4);
|
|
|
|
lcd_write_reg(0x10, 0x1E21); /* power control 1 */
|
|
lcd_delay(166670);
|
|
}
|
|
}
|
|
|
|
/* lcd enable for lcd type 2 */
|
|
static void lcd_enable2(bool on)
|
|
{
|
|
if (on) {
|
|
lcd_write_reg(0x10, 0x0400);
|
|
lcd_delay(666680);
|
|
|
|
lcd_write_reg(0x07, 0x0000);
|
|
lcd_write_reg(0x12, 0x0000);
|
|
lcd_delay(166670);
|
|
|
|
lcd_write_reg(0x11, 0x000C);
|
|
lcd_write_reg(0x12, 0x0A1C);
|
|
lcd_write_reg(0x13, 0x0022);
|
|
lcd_write_reg(0x14, 0x0000);
|
|
lcd_write_reg(0x10, 0x7404);
|
|
lcd_write_reg(0x11, 0x0738);
|
|
lcd_write_reg(0x10, 0x7404);
|
|
lcd_delay(833350);
|
|
|
|
lcd_write_reg(0x07, 0x0009);
|
|
lcd_write_reg(0x12, 0x065C);
|
|
lcd_delay(3333400);
|
|
|
|
lcd_write_reg(0x0B, 0x0000);
|
|
lcd_write_reg(0x07, 0x0009);
|
|
lcd_delay(666680);
|
|
|
|
lcd_write_reg(0x07, 0x0109);
|
|
lcd_delay(666680);
|
|
|
|
lcd_write_reg(0x07, 0x010B);
|
|
}
|
|
else {
|
|
lcd_write_reg(0x0B, 0x0109);
|
|
lcd_write_reg(0x07, 0x0009);
|
|
lcd_delay(666680);
|
|
|
|
lcd_write_reg(0x07, 0x0008);
|
|
lcd_delay(666680);
|
|
|
|
lcd_write_reg(0x10, 0x0400);
|
|
lcd_write_reg(0x10, 0x0401);
|
|
lcd_delay(166670);
|
|
}
|
|
}
|
|
|
|
/* turn both the lcd controller and the lcd itself on or off */
|
|
void lcd_enable(bool on)
|
|
{
|
|
if (on) {
|
|
/* enable controller clock */
|
|
PWRCON &= ~(1 << 18);
|
|
|
|
lcd_controller_power(true);
|
|
lcd_delay(166670);
|
|
}
|
|
|
|
/* call type specific power function */
|
|
if (lcd_type == 1) {
|
|
lcd_enable1(on);
|
|
}
|
|
else {
|
|
lcd_enable2(on);
|
|
}
|
|
|
|
if (!on) {
|
|
lcd_controller_power(false);
|
|
|
|
/* disable controller clock */
|
|
PWRCON |= (1 << 18);
|
|
}
|
|
}
|
|
|
|
/* initialise the lcd controller inside the s5l8700 */
|
|
static void lcd_controller_init(void)
|
|
{
|
|
PWRCON &= ~(1 << 18);
|
|
|
|
LCDCON1 = (0 << 28) | /* BURSTLEN */
|
|
(0 << 19) | /* DIVEN */
|
|
(12 << 13) | /* CLKVAL */
|
|
(1 << 12) | /* CLKDIR, 1=divided clock */
|
|
(0 << 11) | /* CLKSEL, 0=HCLK, 1=PLL */
|
|
(5 << 6) | /* BPPMODEF, 5=rgb565, 7=raw24 */
|
|
(5 << 2) | /* BPPMODEB, 5=rgb565, 7=raw24 */
|
|
(0 << 0); /* ENVID */
|
|
LCDCON2 = (2 << 9) | /* PALFRM, 2=rgb565 palette */
|
|
(1 << 7) | /* IVCLK */
|
|
(1 << 6) | /* IHSYNC */
|
|
(1 << 5) | /* IVSYNC */
|
|
(1 << 3); /* IVDEN */
|
|
LCDTCON1 = (lcd_type == 1) ? 0x070103 : 0x030303;
|
|
LCDTCON2 = (lcd_type == 1) ? 0x070103 : 0x030703;
|
|
LCDTCON3 = ((LCD_HEIGHT - 1) << 11) | (LCD_WIDTH - 1);
|
|
LCDOSD1 = 0;
|
|
LCDOSD2 = 0;
|
|
LCDOSD3 = 0;
|
|
|
|
LCDB1SADDR1 = 0;
|
|
LCDB2SADDR1 = 0;
|
|
LCDF1SADDR1 = 0;
|
|
LCDF2SADDR1 = 0;
|
|
LCDB1SADDR2 = 0;
|
|
LCDB2SADDR2 = 0;
|
|
LCDF1SADDR2 = 0;
|
|
LCDF2SADDR2 = 0;
|
|
LCDB1SADDR3 = 0;
|
|
LCDB2SADDR3 = 0;
|
|
LCDF1SADDR3 = 0;
|
|
LCDF2SADDR3 = 0;
|
|
|
|
LCDKEYCON = 0;
|
|
LCDCOLVAL = 0;
|
|
LCDBGCON = 0;
|
|
LCDFGCON = 0;
|
|
LCDDITHMODE = 0;
|
|
|
|
LCDINTCON = 0;
|
|
}
|
|
|
|
void lcd_init_device(void)
|
|
{
|
|
unsigned int lcd_id;
|
|
uint32_t fb, fb_end, window;
|
|
|
|
/* configure LCD SPI pins */
|
|
lcd_spi_init();
|
|
|
|
/* identify display through SPI */
|
|
lcd_id = lcd_read_reg(0);
|
|
lcd_type = (lcd_id == LCD_TYPE1_ID) ? 1 : 2;
|
|
|
|
/* display specific init sequence */
|
|
if (lcd_type == 1) {
|
|
lcd_init1();
|
|
}
|
|
else {
|
|
lcd_init2();
|
|
}
|
|
|
|
/* init LCD controller */
|
|
lcd_controller_init();
|
|
|
|
/* set framebuffer addresses */
|
|
fb = (uint32_t) &lcd_framebuffer[0][0];
|
|
fb_end = (uint32_t) &lcd_framebuffer[LCD_HEIGHT][0];
|
|
window = 2 * LCD_WIDTH;
|
|
|
|
LCDB1SADDR1 = fb;
|
|
LCDB2SADDR1 = fb;
|
|
LCDF1SADDR1 = fb;
|
|
LCDF2SADDR1 = fb;
|
|
|
|
LCDB1SADDR2 = fb_end;
|
|
LCDB2SADDR2 = fb_end;
|
|
LCDF1SADDR2 = fb_end;
|
|
LCDF2SADDR2 = fb_end;
|
|
|
|
LCDB1SADDR3 = window;
|
|
LCDB2SADDR3 = window;
|
|
LCDF1SADDR3 = window;
|
|
LCDF2SADDR3 = window;
|
|
|
|
lcd_enable(true);
|
|
|
|
/* configure LCD pins */
|
|
PCON_ASRAM = 1;
|
|
}
|
|
|
|
void lcd_update_rect(int x, int y, int width, int height)
|
|
{
|
|
/* not implemented yet, LCD controller accesses framebuffer directly */
|
|
(void) x;
|
|
(void) y;
|
|
(void) width;
|
|
(void) height;
|
|
}
|
|
|
|
void lcd_update(void)
|
|
{
|
|
lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
|
|
}
|
|
|