rockbox/firmware/export
2007-03-06 20:32:13 +00:00
..
adc.h Target tree support for Iriver iFP. 2006-11-09 22:58:35 +00:00
arcotg_udc.h No functional changes, just reorganising code: 2007-02-16 22:13:21 +00:00
ata.h Do the CONFIG_LED define 2007-02-18 05:07:19 +00:00
ata_idle_notify.h dont allow the ata callbacks to be run less than once every 30s unless 2006-11-26 09:53:42 +00:00
ata_mmc.h
audio.h Fix remaining CONFIG_TUNER checks. 2007-02-18 08:46:12 +00:00
backlight.h Fix CONFIG_BACKLIGHT warnings. 2007-02-18 10:07:27 +00:00
bidi.h
bitswap.h
buffer.h
button.h Fix CONFIG_BACKLIGHT warnings. 2007-02-18 10:07:27 +00:00
config-e200.h Battery reading support for Sansa. Still needs calibration of voltage->percent mappings and remaining time. Thanks to Rene Peinthor for doing most of the work. 2007-02-20 15:55:38 +00:00
config-fmrecorder.h Add wake on alarm support for Ipods. Rename HAVE_ALARM_MOD to HAVE_ALARM_RTC since it's not always a mod. Make Ipod PCF driver keep other flags in OOCC1 that have been set instead of overwriting them. 2007-02-28 21:55:11 +00:00
config-gigabeat.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-h10.h WM8711/8721/8731 have no tone controls, so enable the software tone controls for the respective targets. 2007-02-26 18:36:58 +00:00
config-h10_5gb.h WM8711/8721/8731 have no tone controls, so enable the software tone controls for the respective targets. 2007-02-26 18:36:58 +00:00
config-h100.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-h120.h remove runtime detection of h1x0 series RTC MOD, but leave driver code 2007-03-03 00:11:20 +00:00
config-h300.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-iaudiom5.h Bring up the M5 port to a working stage: Extended numerous explicit checks for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim. 2007-03-05 00:04:00 +00:00
config-iaudiox5.h Use the browse button for A-B instead of quickscreen button. Files are 2007-03-02 00:37:03 +00:00
config-ifp7xx.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-ipod3g.h Fix sim builds. 2007-02-28 22:22:12 +00:00
config-ipod4g.h Fix sim builds. 2007-02-28 22:22:12 +00:00
config-ipodcolor.h Fix sim builds. 2007-02-28 22:22:12 +00:00
config-ipodmini.h Fix sim builds. 2007-02-28 22:22:12 +00:00
config-ipodmini2g.h Fix sim builds. 2007-02-28 22:22:12 +00:00
config-ipodnano.h Fix sim builds. 2007-02-28 22:22:12 +00:00
config-ipodvideo.h Fix sim builds. 2007-02-28 22:22:12 +00:00
config-ondiofm.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-ondiosp.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-player.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-recorder.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-recorderv2.h Add wake on alarm support for Ipods. Rename HAVE_ALARM_MOD to HAVE_ALARM_RTC since it's not always a mod. Make Ipod PCF driver keep other flags in OOCC1 that have been set instead of overwriting them. 2007-02-28 21:55:11 +00:00
config-tpj1022.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config.h Dual core support for PP502x players (iPod G4 and later, iriver h10, Sansa - iPod G3 will be coming soon.) This allows threads to be run on either core provided that all communications between the cores is done using uncached memory. There should be no significant change in battery life from doing this. Documentation (on the RockboxKernel wiki page) will follow shortly. 2007-03-04 20:06:41 +00:00
cpu.h Removed the Gmini 120 and Gmini SP code. These ports are dead, unfortunately. 2006-11-10 20:26:01 +00:00
debug.h Support building tagcache db natively on PC using the core of the 2006-11-10 08:03:33 +00:00
disk.h
eeprom_24cxx.h
eeprom_settings.h Prepare core support for the iriver bootloader supporting ROM images 2007-01-12 18:34:00 +00:00
enc_base.h SWCODEC Encoders: Better declarations of chunk flags. Mark constants as unsigned long to match structure variable type. 2007-02-10 07:19:32 +00:00
fat.h Remove unused code, make comments c-style, make one private function static 2007-02-25 15:44:55 +00:00
fmradio.h Change the radio screen and recording screen to use the global_status structure for state. I guess global_status had been added already and I missed it. :D 2007-02-07 04:24:21 +00:00
fmradio_i2c.h
font.h Use a larger font cache on the targets that can afford the (quite small) RAM usage 2007-03-05 08:32:35 +00:00
gdb_api.h
general.h Forgot to use cvs add on a few new files in the fresh checkout I used. woops. 2006-11-06 18:18:05 +00:00
generic_i2c.h Removed executable flag 2007-01-09 23:29:07 +00:00
hangul.h
hwcompat.h
i2c-coldfire.h
i2c-pp.h Correct the (C) info 2007-02-27 21:22:29 +00:00
i2c.h
i2s.h Move I2S initialisation out of the Wolfson codec driver 2006-12-09 19:18:18 +00:00
id3.h remove numerical genre and use genre_string consistently: 2007-03-02 21:49:42 +00:00
isp1362.h Removed executable flag 2007-01-09 23:29:07 +00:00
kernel.h Convert queues to use intptr_t for event data and return values as most of the time pointer are not passed and it should make some things a bit cleaner. 2006-12-19 16:50:07 +00:00
lcd-player-charset.h
lcd-remote.h Move target specific parts of the H100 remote LCD driver to target tree. 2007-02-25 22:09:14 +00:00
lcd.h Introduced LCD_FBHEIGHT in addition to the already existing LCD_FBWIDTH to ease framebuffer handling a bit. Added equivalent definitions for the remote LCD. 2007-02-20 19:31:34 +00:00
led.h
logf.h Support building tagcache db natively on PC using the core of the 2006-11-10 08:03:33 +00:00
m5636.h Removed executable flag 2007-01-09 23:29:07 +00:00
mas.h
mcf5249.h H300: (1) Use DMA for LCD updates, with auto-aligned line reads. Speeds up LCD updates by ~ 75% at 11MHz and 45MHz. Only ~ 11% speedup at 124MHz due to (2). (2) Less aggressive LCD transfer timing at 124MHz. With the previous timing, slightly corrupted display contents was reported, and with DMA transfers at least 4 waitstates are needed to make updates work at all. * A table in system-iriver.c shows settings for all integer multiples of the base clock frequency (info for developers, not yet complete). 2006-11-02 20:50:50 +00:00
mcf5250.h
mp3_playback.h
mp3data.h Shave a few bytes off the binary size, especially on hwcodec targets 2007-02-15 22:55:22 +00:00
mpeg.h Hook up .cue file detection via a callback klugde on HWCODEC, to make cue sheet support actually work. 2007-03-01 00:26:24 +00:00
panic.h
pcf50605.h
pcf50606.h Some more M5 adjustments. 2007-03-05 01:31:26 +00:00
pcm_playback.h More catching up on old work. Refine audio interface setup on Coldfire. Stop the funky glitching on the iAudio stuff when starting recording esp. at 88.2kHz. (probably due to the bidi interface). iRivers don't seem to care what you do. TLV320 still seems to have a little trouble selecting it's filters correctly for 88.2kHz or it could be some odd phasing effect. Get rid of the horrible reset parameter in pcm_apply_settings as it can decide for itself. 2007-03-05 08:14:27 +00:00
pcm_record.h Place all recording functionality on pcmrec thread to serialize all recording operations. Button mash problems should be ruled out of pcm_record.c. Add additional lightweight checks by default and display any warnings that occurred during recording in first line of recording screen when they occur by blinking back and forth from warning display to normal line (Warning: <hex bitmask>). Warnings are cleared when beginning a new recording so write the number down if you see it and file a report. Add heavier checks when PCMREC_PARANOID is defined in the player config header (encoders and pcm_record must be aware of the define since it changes the chunk header format). These checks are mainly concerned with things that may cause skipping but also add unwanted overhead for normal operation. Best used with logf enabled. 2006-12-10 14:21:31 +00:00
pcm_sampr.h avoid using #if on undefined symbols, in preparation for -Wundef 2007-02-17 21:15:06 +00:00
pnx0101.h
power.h Fix remaining CONFIG_TUNER checks. 2007-02-18 08:46:12 +00:00
powermgmt.h Improved power management (FS#3001). Shutdown rockbox when the battery gets to a level where the device doesn't function properly. Calculate remaining charging time while charging (rather than remaining running time). Show "Low Battery" and "Battery Empty" warnings. Also fixes FS#4786. 2006-11-11 01:18:57 +00:00
pp5002.h Dual core support for PP502x players (iPod G4 and later, iriver h10, Sansa - iPod G3 will be coming soon.) This allows threads to be run on either core provided that all communications between the cores is done using uncached memory. There should be no significant change in battery life from doing this. Documentation (on the RockboxKernel wiki page) will follow shortly. 2007-03-04 20:06:41 +00:00
pp5020.h Dual core support for PP502x players (iPod G4 and later, iriver h10, Sansa - iPod G3 will be coming soon.) This allows threads to be run on either core provided that all communications between the cores is done using uncached memory. There should be no significant change in battery life from doing this. Documentation (on the RockboxKernel wiki page) will follow shortly. 2007-03-04 20:06:41 +00:00
pp5024.h
profile.h
replaygain.h
rolo.h Improved RoLo support for PortalPlayer - handles the COP correctly 2007-02-27 22:55:12 +00:00
rtc.h remove runtime detection of h1x0 series RTC MOD, but leave driver code 2007-03-03 00:11:20 +00:00
s3c2440.h Setup LCD ourselves; move LCD buffer and TTB to free up 1.7MB of memory 2007-01-13 02:24:15 +00:00
serial.h
sh7034.h
sound.h Add software based bass/treble controls for targets which have no such functionality in hardware (currently only X5). They can also be used on any other SWCODEC target by adding #define HAVE_SW_TONE_CONTROLS in the relevant config-*.h file. Also remove some now unneeded zero checks when using get_replaygain_int(). Comments on sound quality are welcome as some parameters can still be fine-tuned. 2007-02-26 00:41:26 +00:00
spdif.h H100/General: HAL for S/PDIF and refinement/bufixes in optical output powering/source selection. 2006-11-13 23:21:54 +00:00
structec.h Make database endianess independent. 2007-02-13 21:51:18 +00:00
sw_i2c.h FS#6419 - driver for H1x0 series RTC Mod with runtime detection 2007-02-28 13:20:36 +00:00
system.h Fix broken builds 2007-01-22 10:58:40 +00:00
thread.h Fix problem with recording screen creep and bag a bigfoot. Voice clips aren't long enough now to untrigger the thread boost that was supposed to be applied to the codec thread. The voice thread was needlessly boosting the codec thread and leaving it boosted which explains the encoders' ability to flood the output buffer when everything else was stopped in its tracks. Check which thread is calling pcmbuf_under_watermark and only initiate the boost when it's the codec thread. Always return the codec thread to its usual priority in pcmbuf_play_stop. 2007-03-06 20:32:13 +00:00
timer.h Change if CONFIG_CPU==PP50XX to ifdef CPU_PP where appropriate 2006-11-22 00:41:30 +00:00
tlv320.h put back the return types which got lost in the previous commit 2006-12-06 13:48:50 +00:00
tuner.h Fix remaining CONFIG_TUNER checks. 2007-02-18 08:46:12 +00:00
uda1380.h put back the return types which got lost in the previous commit 2006-12-06 13:48:50 +00:00
usb.h FS#4770 - Add USB charging for the H300 series 2007-02-01 10:47:22 +00:00
usb_serial.h
wm8731l.h FS#6096. Recording on PortalPlayer targets (H10, iPod Video, iPod 4g, iPod Color, iPod Nano). 2006-12-18 01:52:21 +00:00
wm8758.h FS#6096. Recording on PortalPlayer targets (H10, iPod Video, iPod 4g, iPod Color, iPod Nano). 2006-12-18 01:52:21 +00:00
wm8975.h move some audio driver specific code to the correspoding files 2006-12-06 13:34:15 +00:00
wmcodec.h Move I2S initialisation out of the Wolfson codec driver 2006-12-09 19:18:18 +00:00