Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/drivers/tuner/si4700.c
Bertrik Sikken 4120946f28 Fix e200v2 radio problem (missing Si4702 initialisation) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21416 a1c6a512-1295-4272-9138-f99709370657
2009-06-20 21:34:27 +00:00

476 lines
14 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Tuner "middleware" for Silicon Labs SI4700 chip
*
* Copyright (C) 2008 Nils Wallménius
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include <stdbool.h>
#include <string.h>
#include <stdlib.h>
#include "kernel.h"
#include "power.h"
#include "tuner.h" /* tuner abstraction interface */
#include "fmradio.h"
#include "fmradio_i2c.h" /* physical interface driver */
/* some models use the internal 32 kHz oscillator which needs special attention
during initialisation, power-up and power-down.
*/
#if defined(SANSA_CLIP) || defined(SANSA_E200V2) || defined(SANSA_FUZE)
#define USE_INTERNAL_OSCILLATOR
#elif defined(TOSHIBA_GIGABEAT_S)
#define SI4700_GPIO_SETUP (SYSCONFIG1_GPIO1_HI_Z | \
SYSCONFIG1_GPIO2_HI_Z | \
SYSCONFIG1_GPIO3_MO_ST_I)
extern int si4700_st(void);
#endif
#ifndef SI4700_GPIO_SETUP
#define SI4700_GPIO_SETUP 0
#endif
#define SEEK_THRESHOLD 0x16
#define I2C_ADR 0x20
/** Registers and bits - "x" denotes Si4702/03 only (so they say) **/
#define DEVICEID 0x0
#define CHIPID 0x1
#define POWERCFG 0x2
#define CHANNEL 0x3
#define SYSCONFIG1 0x4
#define SYSCONFIG2 0x5
#define SYSCONFIG3 0x6
#define TEST1 0x7
#define TEST2 0x8
#define BOOTCONFIG 0x9
#define STATUSRSSI 0xA
#define READCHAN 0xB
#define RDSA 0xC /* x */
#define RDSB 0xD /* x */
#define RDSC 0xE /* x */
#define RDSD 0xF /* x */
/* DEVICEID (0x0) */
#define DEVICEID_PN (0xf << 12)
/* 0x01 = Si4700/01 */
/* 0x01 = Si4702/03 */
#define DEVICEID_MFGID (0xfff << 0)
/* always 0x242 */
/* CHIPID (0x1) */
#if 0 /* Informational */
/* Si4700/01 */
#define CHIPID_REV (0x3f << 10)
#define CHIPID_DEV (0x1 << 9)
/* 0 before powerup */
/* 0 after powerup = Si4700 */
/* 1 after powerup = Si4701 */
#define CHIPID_FIRMWARE (0xff << 0)
/* Si4702/03 */
#define CHIPID_REV (0x3f << 10)
#define CHIPID_DEV (0xf << 6)
/* 0000 before PU = Si4702 */
/* 0001 after PU = Si4702 */
/* 1000 before PU = Si4703 */
/* 1001 after PU = Si4703 */
#define CHIPID_FIRMWARE (0x3f << 0)
#endif /* 0 */
/* POWERCFG (0x2) */
#define POWERCFG_DSMUTE (0x1 << 15)
#define POWERCFG_DMUTE (0x1 << 14)
#define POWERCFG_MONO (0x1 << 13)
#define POWERCFG_RDSM (0x1 << 11) /* x */
#define POWERCFG_SKMODE (0x1 << 10)
#define POWERCFG_SEEKUP (0x1 << 9)
#define POWERCFG_SEEK (0x1 << 8)
#define POWERCFG_DISABLE (0x1 << 6)
#define POWERCFG_ENABLE (0x1 << 0)
/* CHANNEL (0x3) */
#define CHANNEL_TUNE (0x1 << 15)
#define CHANNEL_CHAN (0x3ff << 0)
#define CHANNEL_CHANw(x) ((x) & CHANNEL_CHAN)
/* SYSCONFIG1 (0x4) */
#define SYSCONFIG1_RDSIEN (0x1 << 15) /* x */
#define SYSCONFIG1_STCIEN (0x1 << 14)
#define SYSCONFIG1_RDS (0x1 << 12) /* x */
#define SYSCONFIG1_DE (0x1 << 11)
#define SYSCONFIG1_AGCD (0x1 << 10)
#define SYSCONFIG1_BLNDADJ (0x3 << 6)
#define SYSCONFIG1_BLNDADJ_31_39_RSSI (0x0 << 6)
#define SYSCONFIG1_BLNDADJ_37_55_RSSI (0x1 << 6)
#define SYSCONFIG1_BLNDADJ_19_37_RSSI (0x2 << 6)
#define SYSCONFIG1_BLNDADJ_25_43_RSSI (0x3 << 6)
#define SYSCONFIG1_GPIO3 (0x3 << 4)
#define SYSCONFIG1_GPIO3_HI_Z (0x0 << 4)
#define SYSCONFIG1_GPIO3_MO_ST_I (0x1 << 4)
#define SYSCONFIG1_GPIO3_LOW (0x2 << 4)
#define SYSCONFIG1_GPIO3_HI (0x3 << 4)
#define SYSCONFIG1_GPIO2 (0x3 << 2)
#define SYSCONFIG1_GPIO2_HI_Z (0x0 << 2)
#define SYSCONFIG1_GPIO2_STC_RDS_I (0x1 << 2)
#define SYSCONFIG1_GPIO2_LOW (0x2 << 2)
#define SYSCONFIG1_GPIO2_HI (0x3 << 2)
#define SYSCONFIG1_GPIO1 (0x3 << 0)
#define SYSCONFIG1_GPIO1_HI_Z (0x0 << 0)
#define SYSCONFIG1_GPIO1_LOW (0x2 << 0)
#define SYSCONFIG1_GPIO1_HI (0x3 << 0)
/* SYSCONFIG2 (0x5) */
#define SYSCONFIG2_SEEKTH (0xff << 8)
#define SYSCONFIG2_SKEETHw(x) (((x) << 8) & SYSCONFIG2_SEEKTH)
#define SYSCONFIG2_BAND (0x3 << 6)
#define SYSCONFIG2_BANDw(x) (((x) << 6) & SYSCONFIG2_BAND)
#define SYSCONFIG2_BANDr(x) (((x) & SYSCONFIG2_BAND) >> 6)
#define SYSCONFIG2_BAND_875_1080 (0x0 << 6) /* tenth-megahertz */
#define SYSCONFIG2_BAND_760_1080 (0x1 << 6)
#define SYSCONFIG2_BAND_760_900 (0x2 << 6)
#define SYSCONFIG2_SPACE (0x3 << 4)
#define SYSCONFIG2_SPACEw(x) (((x) << 4) & SYSCONFIG2_SPACE)
#define SYSCONFIG2_SPACEr(x) (((x) & SYSCONFIG2_SPACE) >> 4)
#define SYSCONFIG2_SPACE_200KHZ (0x0 << 4)
#define SYSCONFIG2_SPACE_100KHZ (0x1 << 4)
#define SYSCONFIG2_SPACE_50KHZ (0x2 << 4)
/* 4700/01 0000=mute,0001=-28dBFS..2dB steps..1111= +0dBFS */
/* 4702/03: VOLEXT=0: 0000=mute,0001=-28dBFS..2dB steps..1111= +0dBFS */
/* VOLEXT=1: 0000=mute,0001=-58dBFS..2dB steps..1111=-30dBFS */
#define SYSCONFIG2_VOLUME (0xf << 0)
#define SYSCONFIG2_VOLUMEw(x) ((x) & SYSCONFIG2_VOLUME)
/* SYSCONFIG3 (0x6) */
#define SYSCONFIG3_SMUTER (0x3 << 14)
#define SYSCONFIG3_SMUTER_FASTEST (0x0 << 14)
#define SYSCONFIG3_SMUTER_FAST (0x1 << 14)
#define SYSCONFIG3_SMUTER_SLOW (0x2 << 14)
#define SYSCONFIG3_SMUTER_SLOWEST (0x3 << 14)
#define SYSCONFIG3_SMUTEA (0x3 << 12)
#define SYSCONFIG3_SMUTEA_16DB (0x0 << 12)
#define SYSCONFIG3_SMUTEA_14DB (0x1 << 12)
#define SYSCONFIG3_SMUTEA_12DB (0x2 << 12)
#define SYSCONFIG3_SMUTEA_10DB (0x3 << 12)
#define SYSCONFIG3_VOLEXT (0x1 << 8) /* x */
#define SYSCONFIG3_SKSNR (0xf << 4)
#define SYSCONFIG3_SKSNRw(x) (((x) << 4) & SYSCONFIG3_SKSNR)
#define SYSCONFIG3_SKCNT (0xf << 0)
#define SYSCONFIG3_SKCNTw(x) (((x) << 0) & SYSCONFIG3_SKCNT)
/* TEST1 (0x7) */
/* 4700/01: 15=always 0, 13:0 = write with preexisting values! */
/* 4702/03: 13:0 = write with preexisting values! */
#define TEST1_XOSCEN (0x1 << 15) /* x */
#define TEST1_AHIZEN (0x1 << 14)
/* TEST2 (0x8) */
/* 15:0 = write with preexisting values! */
/* BOOTCONFIG (0x9) */
/* 15:0 = write with preexisting values! */
/* STATUSRSSI (0xA) */
#define STATUSRSSI_RDSR (0x1 << 15) /* x */
#define STATUSRSSI_STC (0x1 << 14)
#define STATUSRSSI_SFBL (0x1 << 13)
#define STATUSRSSI_AFCRL (0x1 << 12)
#define STATUSRSSI_RDSS (0x1 << 11) /* x */
#define STATUSRSSI_BLERA (0x3 << 9) /* x */
#define STATUSRSSI_ST (0x1 << 8)
#define STATUSRSSI_RSSI (0xff << 0)
#define STATUSRSSI_RSSIr(x) ((x) & 0xff)
/* READCHAN (0xB) */
#define READCHAN_BLERB (0x3 << 14) /* x */
#define READCHAN_BLERC (0x3 << 12) /* x */
#define READCHAN_BLERD (0x3 << 10) /* x */
#define READCHAN_READCHAN (0x3ff << 0)
/* RDSA-D (0xC-0xF) */
/* 4702/03: RDS Block A-D data */
static bool tuner_present = false;
static int curr_frequency = 87500000; /* Current station frequency (HZ) */
static uint16_t cache[16];
/* reads <len> registers from radio at offset 0x0A into cache */
static void si4700_read(int len)
{
int i;
unsigned char buf[32];
unsigned char *ptr = buf;
uint16_t data;
fmradio_i2c_read(I2C_ADR, buf, len * 2);
for (i = 0; i < len; i++) {
data = ptr[0] << 8 | ptr[1];
cache[(i + STATUSRSSI) & 0xF] = data;
ptr += 2;
}
}
/* writes <len> registers from cache to radio at offset 0x02 */
static void si4700_write(int len)
{
int i;
unsigned char buf[32];
unsigned char *ptr = buf;
uint16_t data;
for (i = 0; i < len; i++) {
data = cache[(i + POWERCFG) & 0xF];
*ptr++ = (data >> 8) & 0xFF;
*ptr++ = data & 0xFF;
}
fmradio_i2c_write(I2C_ADR, buf, len * 2);
}
/* Hide silly, wrapped and continuous register reading and make interface
* appear sane and normal. This also makes the driver compatible with
* using the 3-wire interface. */
static uint16_t si4700_read_reg(int reg)
{
si4700_read(((reg - STATUSRSSI) & 0xF) + 1);
return cache[reg];
}
static void si4700_write_reg(int reg, uint16_t value)
{
cache[reg] = value;
si4700_write(((reg - POWERCFG) & 0xF) + 1);
}
static void si4700_write_masked(int reg, uint16_t bits, uint16_t mask)
{
si4700_write_reg(reg, (cache[reg] & ~mask) | (bits & mask));
}
static void si4700_write_set(int reg, uint16_t mask)
{
si4700_write_reg(reg, cache[reg] | mask);
}
static void si4700_write_clear(int reg, uint16_t mask)
{
si4700_write_reg(reg, cache[reg] & ~mask);
}
#if (SI4700_GPIO_SETUP & SYSCONFIG1_GPIO3) != SYSCONFIG1_GPIO3_MO_ST_I
/* Poll i2c for the stereo status */
static inline int si4700_st(void)
{
return (si4700_read_reg(STATUSRSSI) & STATUSRSSI_ST) >> 8;
}
#endif
void si4700_init(void)
{
tuner_power(true);
/* read all registers */
si4700_read(16);
/* check device id */
if (cache[DEVICEID] == 0x1242)
{
tuner_present = true;
#ifdef USE_INTERNAL_OSCILLATOR
/* Enable the internal oscillator
(Si4702-16 needs this register to be initialised to 0x100) */
si4700_write_set(TEST1, TEST1_XOSCEN | 0x100);
sleep(HZ/2);
#endif
}
tuner_power(false);
}
static void si4700_sleep(int snooze)
{
if (snooze)
{
/** power down **/
/* ENABLE high, DISABLE high */
si4700_write_set(POWERCFG,
POWERCFG_DISABLE | POWERCFG_ENABLE);
/* Bits self-clear once placed in powerdown. */
cache[POWERCFG] &= ~(POWERCFG_DISABLE | POWERCFG_ENABLE);
}
else
{
/** power up **/
/* ENABLE high, DISABLE low */
si4700_write_masked(POWERCFG, POWERCFG_ENABLE,
POWERCFG_DISABLE | POWERCFG_ENABLE);
sleep(110 * HZ / 1000);
/* init register cache */
si4700_read(16);
#if SI4700_GPIO_SETUP != 0
si4700_write_masked(SYSCONFIG1, SI4700_GPIO_SETUP,
SYSCONFIG1_GPIO1 | SYSCONFIG1_GPIO2 |
SYSCONFIG1_GPIO3);
#endif
si4700_write_masked(SYSCONFIG2,
SYSCONFIG2_SKEETHw(SEEK_THRESHOLD) |
SYSCONFIG2_VOLUMEw(0xF),
SYSCONFIG2_VOLUME | SYSCONFIG2_SEEKTH);
}
}
static void si4700_set_frequency(int freq)
{
static const unsigned int spacings[3] =
{
200000, /* SYSCONFIG2_SPACE_200KHZ */
100000, /* SYSCONFIG2_SPACE_100KHZ */
50000, /* SYSCONFIG2_SPACE_50KHZ */
};
static const unsigned int bands[3] =
{
87500000, /* SYSCONFIG2_BAND_875_1080 */
76000000, /* SYSCONFIG2_BAND_760_1080 */
76000000, /* SYSCONFIG2_BAND_760_900 */
};
/* check BAND and spacings */
int space = SYSCONFIG2_SPACEr(cache[SYSCONFIG2]);
int band = SYSCONFIG2_BANDr(cache[SYSCONFIG2]);
int chan = (freq - bands[band]) / spacings[space];
curr_frequency = freq;
si4700_write_reg(CHANNEL, CHANNEL_CHANw(chan) | CHANNEL_TUNE);
do
{
/* tuning should be done within 60 ms according to the datasheet */
sleep(HZ * 60 / 1000);
}
while ((si4700_read_reg(STATUSRSSI) & STATUSRSSI_STC) == 0); /* STC high? */
si4700_write_clear(CHANNEL, CHANNEL_TUNE); /* Set TUNE low */
}
static int si4700_tuned(void)
{
/* Primitive tuning check: sufficient level and AFC not railed */
uint16_t status = si4700_read_reg(STATUSRSSI);
if (STATUSRSSI_RSSIr(status) >= SEEK_THRESHOLD &&
(status & STATUSRSSI_AFCRL) == 0)
return 1;
return 0;
}
static void si4700_set_region(int region)
{
const struct si4700_region_data *rd = &si4700_region_data[region];
uint16_t bandspacing = SYSCONFIG2_BANDw(rd->band) |
SYSCONFIG2_SPACEw(rd->spacing);
uint16_t oldbs = cache[SYSCONFIG2] & (SYSCONFIG2_BAND | SYSCONFIG2_SPACE);
si4700_write_masked(SYSCONFIG1,
rd->deemphasis ? SYSCONFIG1_DE : 0,
SYSCONFIG1_DE);
si4700_write_masked(SYSCONFIG2, bandspacing,
SYSCONFIG2_BAND | SYSCONFIG2_SPACE);
/* Retune if this region change would change the channel number. */
if (oldbs != bandspacing)
si4700_set_frequency(curr_frequency);
}
/* tuner abstraction layer: set something to the tuner */
int si4700_set(int setting, int value)
{
switch(setting)
{
case RADIO_SLEEP:
si4700_sleep(value);
break;
case RADIO_FREQUENCY:
si4700_set_frequency(value);
break;
case RADIO_SCAN_FREQUENCY:
si4700_set_frequency(value);
return si4700_tuned();
case RADIO_MUTE:
si4700_write_masked(POWERCFG, value ? 0 : POWERCFG_DMUTE,
POWERCFG_DMUTE);
break;
case RADIO_REGION:
si4700_set_region(value);
break;
case RADIO_FORCE_MONO:
si4700_write_masked(POWERCFG, value ? POWERCFG_MONO : 0,
POWERCFG_MONO);
break;
default:
return -1;
}
return 1;
}
/* tuner abstraction layer: read something from the tuner */
int si4700_get(int setting)
{
int val = -1; /* default for unsupported query */
switch(setting)
{
case RADIO_PRESENT:
val = tuner_present ? 1 : 0;
break;
case RADIO_TUNED:
val = si4700_tuned();
break;
case RADIO_STEREO:
val = si4700_st();
break;
}
return val;
}
void si4700_dbg_info(struct si4700_dbg_info *nfo)
{
memset(nfo->regs, 0, sizeof (nfo->regs));
if (tuner_powered())
{
si4700_read(16);
memcpy(nfo->regs, cache, sizeof (nfo->regs));
}
}
Reference in a new issue View git blame Copy permalink