Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/sansaconnect.h
Nils Wallménius d29a11b7a8 Rename HAVE_PITCHSCREEN to HAVE_PITCHCONTROL 
Also move the definition to config.h

Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff
Reviewed-on: http://gerrit.rockbox.org/234
Reviewed-by: Nils Wallménius <nils@rockbox.org>
2012-05-09 14:32:38 +02:00

199 lines
5.5 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
*
* Copyright (C) 2011 by Tomasz Moń
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
/*
* This config file is for the Sansa Connect
*/
/* This is the absolute address on the bus set by OF bootloader */
#define CONFIG_SDRAM_START 0x01000000
#define SANSA_CONNECT 1
#define MODEL_NAME "Sandisk Sansa Connect"
/* For Rolo and boot loader */
#define MODEL_NUMBER 81
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
/* define this if you use an SD controller */
#define CONFIG_STORAGE STORAGE_SD
#define HAVE_MULTIDRIVE
#define NUM_DRIVES 2
#define HAVE_HOTSWAP
#define HAVE_HOTSWAP_STORAGE_AS_MAIN
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST
/* define this if you want viewport clipping enabled for safe LCD functions */
#define HAVE_VIEWPORT_CLIP
/* LCD dimensions */
#define CONFIG_LCD LCD_CONNECT
#define LCD_WIDTH 240
#define LCD_HEIGHT 320
#define LCD_DEPTH 16 /* 65k colours */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
#define HAVE_LCD_ENABLE
#ifndef BOOTLOADER
#define HAVE_LCD_SLEEP
#endif
#define LCD_SLEEP_TIMEOUT (2*HZ)
#define MAX_ICON_HEIGHT 35
#define MAX_ICON_WIDTH 35
#define CONFIG_KEYPAD SANSA_CONNECT_PAD
/* Define this to have CPU bootsted while scrolling in the UI */
#define HAVE_GUI_BOOST
/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST
#define HAVE_MORSE_INPUT
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
//#define HAVE_HARDWARE_BEEP
/* There is no hardware tone control */
#define HAVE_SW_TONE_CONTROLS
#define HAVE_AIC3X
//#define HW_SAMPR_CAPS SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 | SAMPR_CAP_8
/* define this if you have a real-time clock */
//#define CONFIG_RTC RTC_STM41T62
/* define this if the unit uses a scrollwheel for navigation */
#define HAVE_SCROLLWHEEL
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING 1
#define MAX_BRIGHTNESS_SETTING 20
#define DEFAULT_BRIGHTNESS_SETTING 16 /* OF default brightness (80%) */
#define DEFAULT_DIMNESS_SETTING 6 /* OF default inactive (30%) */
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x200000
#define BATTERY_CAPACITY_DEFAULT 800 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 700 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 1000 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 100 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* define current usage levels */
#if 0
/* TODO */
#define CURRENT_NORMAL 85
#define CURRENT_BACKLIGHT 200
#endif
/* Hardware controlled charging with monitoring */
//#define CONFIG_CHARGING CHARGING_MONITOR
#define CONFIG_CPU DM320
#define CONFIG_I2C I2C_DM320
#define HAVE_SOFTWARE_I2C
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* The size of the flash ROM */
#define FLASH_SIZE 0x400000
/* Define this to the CPU frequency */
#define CPU_FREQ 150000000
/* Define this if you have ATA power-off control */
#define HAVE_ATA_POWER_OFF
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
#if 0
#define HAVE_USBSTACK
#define USB_VENDOR_ID 0x0781
#define USB_PRODUCT_ID 0x7480
#endif
#define INCLUDE_TIMEOUT_API
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define BOOTFILE_EXT "sansa"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY
Reference in a new issue View git blame Copy permalink