3828c7d982
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@6730 a1c6a512-1295-4272-9138-f99709370657
279 lines
8 KiB
C
279 lines
8 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2005 by Andy Young
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "lcd.h"
|
|
#include "cpu.h"
|
|
#include "kernel.h"
|
|
#include "thread.h"
|
|
#include "power.h"
|
|
#include "debug.h"
|
|
#include "system.h"
|
|
#include "sprintf.h"
|
|
#include "button.h"
|
|
#include "string.h"
|
|
#include "file.h"
|
|
#include "buffer.h"
|
|
|
|
#include "i2c-h100.h"
|
|
#include "uda1380.h"
|
|
|
|
/* ------------------------------------------------- */
|
|
/* Local functions and variables */
|
|
/* ------------------------------------------------- */
|
|
|
|
int uda1380_write_reg(unsigned char reg, unsigned short value);
|
|
unsigned short uda1380_regs[0x30];
|
|
short uda1380_balance;
|
|
short uda1380_volume;
|
|
|
|
/* Definition of a playback configuration to start with */
|
|
|
|
#define NUM_DEFAULT_REGS 13
|
|
unsigned short uda1380_defaults[2*NUM_DEFAULT_REGS] =
|
|
{
|
|
REG_0, EN_DAC | EN_INT | EN_DEC | SYSCLK_256FS | WSPLL_25_50,
|
|
REG_I2S, I2S_IFMT_IIS,
|
|
REG_PWR, PON_PLL | PON_DAC | PON_BIAS, /* PON_HP is enabled later */
|
|
REG_AMIX, AMIX_RIGHT(0x3f) | AMIX_LEFT(0x3f), /* 00=max, 3f=mute */
|
|
REG_MASTER_VOL, MASTER_VOL_LEFT(0x20) | MASTER_VOL_RIGHT(0x20), /* 00=max, ff=mute */
|
|
REG_MIX_VOL, MIX_VOL_CH_1(0) | MIX_VOL_CH_2(0xff), /* 00=max, ff=mute */
|
|
REG_EQ, EQ_MODE_MAX, /* Bass and tremble = 0 dB */
|
|
REG_MUTE, MUTE_MASTER, /* Mute everything to start with */
|
|
REG_MIX_CTL, 0,
|
|
REG_DEC_VOL, 0,
|
|
REG_PGA, MUTE_ADC,
|
|
REG_ADC, SKIP_DCFIL,
|
|
REG_AGC, 0
|
|
};
|
|
|
|
|
|
|
|
/* Returns 0 if register was written or -1 if write failed */
|
|
int uda1380_write_reg(unsigned char reg, unsigned short value)
|
|
{
|
|
unsigned char data[4];
|
|
|
|
data[0] = UDA1380_ADDR;
|
|
data[1] = reg;
|
|
data[2] = value >> 8;
|
|
data[3] = value & 0xff;
|
|
|
|
if (i2c_write(1, data, 4) != 4)
|
|
{
|
|
DEBUGF("uda1380 error reg=0x%x", reg);
|
|
return -1;
|
|
}
|
|
|
|
uda1380_regs[reg] = value;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Sets the master volume
|
|
*
|
|
* \param vol Range [0..255] 0=max, 255=mute
|
|
*
|
|
*/
|
|
int uda1380_setvol(int vol)
|
|
{
|
|
int vol_l, vol_r;
|
|
|
|
uda1380_volume = vol;
|
|
/* Simple linear volume crossfade curves */
|
|
vol_l = MAX(uda1380_balance*0xff/100, 0);
|
|
vol_r = MAX(-uda1380_balance*0xff/100, 0);
|
|
return uda1380_write_reg(REG_MASTER_VOL,
|
|
MASTER_VOL_LEFT(vol_l) | MASTER_VOL_RIGHT(vol_r));
|
|
}
|
|
|
|
/**
|
|
* Sets stereo balance
|
|
*/
|
|
void uda1380_set_balance(int bal)
|
|
{
|
|
uda1380_balance = bal;
|
|
uda1380_setvol(uda1380_volume);
|
|
}
|
|
|
|
/**
|
|
* Sets the bass value (0-15)
|
|
*/
|
|
void uda1380_set_bass(int value)
|
|
{
|
|
uda1380_write_reg(REG_EQ, (uda1380_regs[REG_EQ] & ~BASS_MASK) | BASSL(value) | BASSR(value));
|
|
}
|
|
|
|
/**
|
|
* Sets the treble value (0-3)
|
|
*/
|
|
void uda1380_set_treble(int value)
|
|
{
|
|
uda1380_write_reg(REG_EQ, (uda1380_regs[REG_EQ] & ~TREBLE_MASK) | TREBLEL(value) | TREBLER(value));
|
|
}
|
|
|
|
/**
|
|
* Mute (mute=1) or enable sound (mute=0)
|
|
*
|
|
*/
|
|
int uda1380_mute(int mute)
|
|
{
|
|
unsigned int value = uda1380_regs[REG_MUTE];
|
|
|
|
if (mute)
|
|
value = value | MUTE_MASTER;
|
|
else
|
|
value = value & ~MUTE_MASTER;
|
|
|
|
return uda1380_write_reg(REG_MUTE, value);
|
|
}
|
|
|
|
/* Returns 0 if successful or -1 if some register failed */
|
|
int uda1380_set_regs(void)
|
|
{
|
|
int i;
|
|
memset(uda1380_regs, 0, sizeof(uda1380_regs));
|
|
|
|
/* Initialize all registers */
|
|
for (i=0; i<NUM_DEFAULT_REGS; i++)
|
|
{
|
|
unsigned char reg = uda1380_defaults[i*2+0];
|
|
unsigned short value = uda1380_defaults[i*2+1];
|
|
|
|
if (uda1380_write_reg(reg, value) == -1)
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Silently enable / disable audio output */
|
|
void uda1380_enable_output(bool enable)
|
|
{
|
|
if (enable) {
|
|
uda1380_write_reg(REG_PWR, uda1380_regs[REG_PWR] | PON_HP);
|
|
|
|
/* Sleep a while, then disable the master mute */
|
|
sleep(HZ/8);
|
|
uda1380_write_reg(REG_MUTE, MUTE_CH2);
|
|
} else {
|
|
uda1380_write_reg(REG_MUTE, MUTE_MASTER);
|
|
uda1380_write_reg(REG_PWR, uda1380_regs[REG_PWR] & ~PON_HP);
|
|
}
|
|
}
|
|
|
|
/* Initialize UDA1380 codec with default register values (uda1380_defaults) */
|
|
int uda1380_init(void)
|
|
{
|
|
if (uda1380_set_regs() == -1)
|
|
return -1;
|
|
uda1380_balance = 0;
|
|
uda1380_volume = 0x20; /* Taken from uda1380_defaults */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Nice shutdown of UDA1380 codec */
|
|
void uda1380_close(void)
|
|
{
|
|
/* First enable mute and sleep a while */
|
|
uda1380_write_reg(REG_MUTE, MUTE_MASTER);
|
|
sleep(HZ/8);
|
|
|
|
/* Then power off the rest of the chip */
|
|
uda1380_write_reg(REG_PWR, 0);
|
|
uda1380_write_reg(REG_0, 0); /* Disable codec */
|
|
}
|
|
|
|
/**
|
|
* Calling this function enables the UDA1380 to send
|
|
* sound samples over the I2S bus, which is connected
|
|
* to the processor's IIS1 interface.
|
|
*
|
|
* source_mic: true=record from microphone, false=record from line-in
|
|
*/
|
|
void uda1380_enable_recording(bool source_mic)
|
|
{
|
|
uda1380_write_reg(REG_0, uda1380_regs[REG_0] | EN_ADC);
|
|
|
|
if (source_mic)
|
|
{
|
|
uda1380_write_reg(REG_PWR, uda1380_regs[REG_PWR] | PON_LNA | PON_ADCL);
|
|
uda1380_write_reg(REG_ADC, (uda1380_regs[REG_ADC] & VGA_GAIN_MASK) | SEL_LNA | SEL_MIC | EN_DCFIL); /* VGA_GAIN: 0=0 dB, F=30dB */
|
|
uda1380_write_reg(REG_PGA, 0);
|
|
} else
|
|
{
|
|
uda1380_write_reg(REG_PWR, uda1380_regs[REG_PWR] | PON_PGAL | PON_ADCL | PON_PGAR | PON_ADCR);
|
|
uda1380_write_reg(REG_ADC, EN_DCFIL);
|
|
uda1380_write_reg(REG_PGA, (uda1380_regs[REG_PGA] & PGA_GAIN_MASK) | PGA_GAINL(0) | PGA_GAINR(0)); /* PGA_GAIN: 0=0 dB, F=24dB */
|
|
}
|
|
|
|
uda1380_write_reg(REG_I2S, uda1380_regs[REG_I2S] | I2S_MODE_MASTER);
|
|
uda1380_write_reg(REG_MIX_CTL, MIX_MODE(3)); /* Not sure which mode is the best one.. */
|
|
|
|
}
|
|
|
|
/**
|
|
* Stop sending samples on the I2S bus
|
|
*/
|
|
void uda1380_disable_recording(void)
|
|
{
|
|
uda1380_write_reg(REG_PGA, MUTE_ADC);
|
|
sleep(HZ/8);
|
|
|
|
uda1380_write_reg(REG_I2S, I2S_IFMT_IIS);
|
|
uda1380_write_reg(REG_PWR, uda1380_regs[REG_PWR] & ~(PON_LNA | PON_ADCL | PON_ADCR | PON_PGAL | PON_PGAR));
|
|
uda1380_write_reg(REG_0, uda1380_regs[REG_0] & ~EN_ADC);
|
|
uda1380_write_reg(REG_ADC, SKIP_DCFIL);
|
|
}
|
|
|
|
/**
|
|
* Set recording gain and volume
|
|
*
|
|
* mic_gain : range 0 .. 15 -> 0 .. 30 dB gain
|
|
* linein_gain : range 0 .. 15 -> 0 .. 24 dB gain
|
|
*
|
|
* adc_volume : range -127 .. 48 -> -63 .. 24 dB gain
|
|
* note that 0 -> 0 dB gain..
|
|
*/
|
|
void uda1380_set_recvol(int mic_gain, int linein_gain, int adc_volume)
|
|
{
|
|
uda1380_write_reg(REG_DEC_VOL, DEC_VOLL(adc_volume) | DEC_VOLR(adc_volume));
|
|
uda1380_write_reg(REG_PGA, (uda1380_regs[REG_PGA] & ~PGA_GAIN_MASK) | PGA_GAINL(linein_gain) | PGA_GAINR(linein_gain));
|
|
uda1380_write_reg(REG_ADC, (uda1380_regs[REG_ADC] & ~VGA_GAIN_MASK) | VGA_GAIN(mic_gain));
|
|
}
|
|
|
|
|
|
/**
|
|
* Enable or disable recording monitor (so one can listen to the recording)
|
|
*
|
|
*/
|
|
void uda1380_set_monitor(int enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
/* enable channel 2 */
|
|
uda1380_write_reg(REG_MIX_VOL, (uda1380_regs[REG_MIX_VOL] & 0x00FF) | MIX_VOL_CH_2(0));
|
|
uda1380_write_reg(REG_MUTE, 0);
|
|
} else
|
|
{
|
|
/* mute channel 2 */
|
|
uda1380_write_reg(REG_MUTE, MUTE_CH2);
|
|
uda1380_write_reg(REG_MIX_VOL, (uda1380_regs[REG_MIX_VOL] & 0x00FF) | MIX_VOL_CH_2(0xff));
|
|
}
|
|
}
|