rockbox/firmware/drivers/fmradio.c
2008-04-28 10:22:05 +00:00

119 lines
2.5 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Linus Nielsen Feltzing
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "lcd.h"
#include "sh7034.h"
#include "kernel.h"
#include "thread.h"
#include "debug.h"
#include "system.h"
#include "fmradio.h"
#if CONFIG_TUNER
/* Signals:
DI (Data In) - PB0 (doubles as data pin for the LCD)
CL (Clock) - PB1 (doubles as clock for the LCD)
CE (Chip Enable) - PB3 (also chip select for the LCD, but active low)
DO (Data Out) - PB4
*/
/* cute little functions */
#define CE_LO and_b(~0x08, PBDRL_ADDR)
#define CE_HI or_b(0x08, PBDRL_ADDR)
#define CL_LO and_b(~0x02, PBDRL_ADDR)
#define CL_HI or_b(0x02, PBDRL_ADDR)
#define DO (PBDR & 0x10)
#define DI_LO and_b(~0x01, PBDRL_ADDR)
#define DI_HI or_b(0x01, PBDRL_ADDR)
#define START or_b((0x08 | 0x02), PBDRL_ADDR)
/* delay loop */
#define DELAY do { int _x; for(_x=0;_x<10;_x++);} while (0)
int fmradio_read(int addr)
{
int i;
int data = 0;
START;
/* First address bit */
CL_LO;
if(addr & 2)
DI_HI;
else
DI_LO;
DELAY;
CL_HI;
DELAY;
/* Second address bit */
CL_LO;
if(addr & 1)
DI_HI;
else
DI_LO;
DELAY;
CL_HI;
DELAY;
for(i = 0; i < 21;i++)
{
CL_LO;
DELAY;
data <<= 1;
data |= (DO)?1:0;
CL_HI;
DELAY;
}
CE_LO;
return data;
}
void fmradio_set(int addr, int data)
{
int i;
/* Include the address in the data */
data |= addr << 21;
START;
for(i = 0; i < 23;i++)
{
CL_LO;
DELAY;
if(data & (1 << 22))
DI_HI;
else
DI_LO;
data <<= 1;
CL_HI;
DELAY;
}
CE_LO;
}
#endif