24cf6ce2f3
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21775 a1c6a512-1295-4272-9138-f99709370657
94 lines
2.7 KiB
C
94 lines
2.7 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2009 by Bertrik Sikken
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include "config.h"
|
|
|
|
#include "inttypes.h"
|
|
#include "s5l8700.h"
|
|
#include "adc.h"
|
|
#include "adc-target.h"
|
|
#include "kernel.h"
|
|
|
|
/* Driver for the built-in ADC of the s5l8700
|
|
|
|
The ADC is put into standby mode after each conversion.
|
|
*/
|
|
|
|
#define ADC_PRESCALER 100 /* 1MHz ADC clock, assuming 100 MHz PCLK */
|
|
#define ADC_DEFAULT (1<<14) | /* prescale enable */ \
|
|
((ADC_PRESCALER-1)<<6) | /* prescaler */ \
|
|
(0<<3) | /* sel_mux */ \
|
|
(0<<2) | /* stdbm */ \
|
|
(0<<1) | /* read_start */ \
|
|
(0<<0) /* enable start */ \
|
|
|
|
|
|
static struct mutex adc_mtx;
|
|
static struct wakeup adc_wakeup;
|
|
|
|
void INT_ADC(void)
|
|
{
|
|
wakeup_signal(&adc_wakeup);
|
|
}
|
|
|
|
unsigned short adc_read(int channel)
|
|
{
|
|
unsigned short data;
|
|
|
|
mutex_lock(&adc_mtx);
|
|
|
|
/* set channel and start conversion */
|
|
ADCCON = ADC_DEFAULT |
|
|
(channel << 3) |
|
|
(1 << 0); /* enable start */
|
|
|
|
/* wait for conversion */
|
|
wakeup_wait(&adc_wakeup, TIMEOUT_BLOCK);
|
|
|
|
/* get the converted data */
|
|
data = ADCDAT0 & 0x3FF;
|
|
|
|
/* put ADC back into standby */
|
|
ADCCON |= (1 << 2);
|
|
|
|
mutex_unlock(&adc_mtx);
|
|
|
|
return data;
|
|
}
|
|
|
|
void adc_init(void)
|
|
{
|
|
mutex_init(&adc_mtx);
|
|
wakeup_init(&adc_wakeup);
|
|
|
|
/* enable clock to ADC */
|
|
PWRCON &= ~(1 << 10);
|
|
|
|
/* configure ADC and put in standby */
|
|
ADCCON = ADC_DEFAULT | (1 << 2);
|
|
|
|
/* configure conversion delay (use default) */
|
|
ADCDLY = 0xFF;
|
|
|
|
/* enable interrupt */
|
|
INTMSK |= (1 << 31);
|
|
}
|
|
|