rockbox/firmware/export/pcm.h
Rafaël Carré 435e08eae1 mark some functions as init functions (discarded after init() has run)
tick_start, fmradio_i2c_init, pcm_init, pcm_postinit, pcm_play_dma_init

Also add some as3525 target specific functions
Make as3525v2 use this attribute

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26328 a1c6a512-1295-4272-9138-f99709370657
2010-05-27 12:00:29 +00:00

159 lines
5.1 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2005 by Linus Nielsen Feltzing
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef PCM_PLAYBACK_H
#define PCM_PLAYBACK_H
#include <string.h> /* size_t */
#define DMA_REC_ERROR_DMA (-1)
#ifdef HAVE_SPDIF_REC
#define DMA_REC_ERROR_SPDIF (-2)
#endif
/** Warnings **/
/* pcm (dma) buffer has overflowed */
#define PCMREC_W_PCM_BUFFER_OVF 0x00000001
/* encoder output buffer has overflowed */
#define PCMREC_W_ENC_BUFFER_OVF 0x00000002
/** Errors **/
/* failed to load encoder */
#define PCMREC_E_LOAD_ENCODER 0x80001000
/* error originating in encoder */
#define PCMREC_E_ENCODER 0x80002000
/* filename queue has desynced from stream markers */
#define PCMREC_E_FNQ_DESYNC 0x80004000
/* I/O error has occurred */
#define PCMREC_E_IO 0x80008000
#ifdef DEBUG
/* encoder has written past end of allotted space */
#define PCMREC_E_CHUNK_OVF 0x80010000
#endif /* DEBUG */
/** RAW PCM routines used with playback and recording **/
/* Typedef for registered callback */
typedef void (*pcm_play_callback_type)(unsigned char **start,
size_t *size);
typedef void (*pcm_rec_callback_type)(int status, void **start, size_t *size);
/* set the pcm frequency - use values in hw_sampr_list
* use -1 for the default frequency
*/
void pcm_set_frequency(unsigned int samplerate);
/* apply settings to hardware immediately */
void pcm_apply_settings(void);
/** RAW PCM playback routines **/
/* Reenterable locks for locking and unlocking the playback interrupt */
void pcm_play_lock(void);
void pcm_play_unlock(void);
void pcm_init(void) INIT_ATTR;
void pcm_postinit(void) INIT_ATTR;
/* This is for playing "raw" PCM data */
void pcm_play_data(pcm_play_callback_type get_more,
unsigned char* start, size_t size);
void pcm_calculate_peaks(int *left, int *right);
const void* pcm_get_peak_buffer(int* count);
size_t pcm_get_bytes_waiting(void);
void pcm_play_stop(void);
void pcm_play_pause(bool play);
bool pcm_is_paused(void);
bool pcm_is_playing(void);
/** The following are for internal use between pcm.c and target-
specific portion **/
/* Called by the bottom layer ISR when more data is needed. Returns non-
* zero size if more data is to be played. Setting start to NULL
* forces stop. */
void pcm_play_get_more_callback(void **start, size_t *size);
extern unsigned long pcm_curr_sampr;
extern unsigned long pcm_sampr;
extern int pcm_fsel;
#ifdef HAVE_PCM_DMA_ADDRESS
void * pcm_dma_addr(void *addr);
#endif
extern volatile bool pcm_playing;
extern volatile bool pcm_paused;
void pcm_play_dma_lock(void);
void pcm_play_dma_unlock(void);
void pcm_play_dma_init(void) INIT_ATTR;
void pcm_play_dma_start(const void *addr, size_t size);
void pcm_play_dma_stop(void);
void pcm_play_dma_pause(bool pause);
const void * pcm_play_dma_get_peak_buffer(int *count);
void pcm_dma_apply_settings(void);
#ifdef HAVE_RECORDING
/** RAW PCM recording routines **/
/* Reenterable locks for locking and unlocking the recording interrupt */
void pcm_rec_lock(void);
void pcm_rec_unlock(void);
/* Initialize pcm recording interface */
void pcm_init_recording(void);
/* Uninitialize pcm recording interface */
void pcm_close_recording(void);
/* Start recording "raw" PCM data */
void pcm_record_data(pcm_rec_callback_type more_ready,
void *start, size_t size);
/* Stop tranferring data into supplied buffer */
void pcm_stop_recording(void);
/* Is pcm currently recording? */
bool pcm_is_recording(void);
/* Called by bottom layer ISR when transfer is complete. Returns non-zero
* size if successful. Setting start to NULL forces stop. */
void pcm_rec_more_ready_callback(int status, void **start, size_t *size);
void pcm_calculate_rec_peaks(int *left, int *right);
/** The following are for internal use between pcm.c and target-
specific portion **/
/* DMA transfer in is currently active */
extern volatile bool pcm_recording;
/* APIs implemented in the target-specific portion */
void pcm_rec_dma_init(void);
void pcm_rec_dma_close(void);
void pcm_rec_dma_start(void *addr, size_t size);
void pcm_rec_dma_record_more(void *start, size_t size);
void pcm_rec_dma_stop(void);
const void * pcm_rec_dma_get_peak_buffer(void);
#endif /* HAVE_RECORDING */
#endif /* PCM_PLAYBACK_H */