Barry Wardell 27f59f64c6 Make the H10 bootloader work again. Also fix the same problem that might be affecting other PP bootloaders. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17357 a1c6a512-1295-4272-9138-f99709370657		2008-05-04 14:42:53 +00:00
..
archos/av300
imx31	Gigabeat S: Man it's so loud in here. We have SOUND! Someone please make keymaps consistent; it's rather messy atm.	2008-05-03 15:14:52 +00:00
ipod	Make the H10 bootloader work again. Also fix the same problem that might be affecting other PP bootloaders.	2008-05-04 14:42:53 +00:00
iriver	Make the H10 bootloader work again. Also fix the same problem that might be affecting other PP bootloaders.	2008-05-04 14:42:53 +00:00
olympus	Make the H10 bootloader work again. Also fix the same problem that might be affecting other PP bootloaders.	2008-05-04 14:42:53 +00:00
pnx0101	Remove wrong usage of '.global'. These symbols are imported, not exported.	2008-04-29 06:47:34 +00:00
s3c2440	Working ROLO for the Gigabeat F/X	2008-05-02 03:27:17 +00:00
sandisk	Make the H10 bootloader work again. Also fix the same problem that might be affecting other PP bootloaders.	2008-05-04 14:42:53 +00:00
tatung/tpj1022	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
tcc77x	Convert the TCC77x ADC driver to use interrupts - based on the technique used in the SH ADC driver.	2008-05-03 07:49:39 +00:00
tcc780x	Disabled unused ata_led function.	2008-05-03 23:37:48 +00:00
tms320dm320	More LCD stuff..	2008-05-03 22:27:55 +00:00
adc-pp5020.c	make mrobe100 work again	2008-02-10 16:06:01 +00:00
ata-as-arm.S	1) add support for ata-as-arm	2008-05-03 13:43:26 +00:00
ata-pp5002.c
ata-pp5020.c	Restore a line accidentally removed by r15705	2007-11-20 07:52:37 +00:00
ata-target.h
audio-pp.c
crt0-pp-bl.S	Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.	2007-11-27 01:20:26 +00:00
crt0-pp.S	Remove wrong usage of '.global'. These symbols are imported, not exported.	2008-04-29 06:47:34 +00:00
ffs-arm.S	Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed.	2008-03-25 02:34:12 +00:00
i2c-pp.c	FS#8898 - Prefix AS3514 registers with AS3514_	2008-04-15 21:33:32 +00:00
i2c-telechips.c	Fixed prototype of i2c_write for plugins and for i2c-telechips (fix red/yellow).	2008-04-28 14:33:03 +00:00
i2s-pp.c	Update source files to include the header file for the functions they implement, to make sure the header and the implementation is consistent (and fix it for a case where it wasn't).	2008-04-28 10:22:05 +00:00
lcd-as-memframe.S
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.c	This is a big chunk of code necessary to prepare for Gigabeat F flash loading and and implementation of rolo. There should be no noticible changes for the user. A new bootloader is not needed.	2008-04-22 04:34:25 +00:00
mmu-arm.h	This is a big chunk of code necessary to prepare for Gigabeat F flash loading and and implementation of rolo. There should be no noticible changes for the user. A new bootloader is not needed.	2008-04-22 04:34:25 +00:00
pcm-pp.c	Update source files to include the header file for the functions they implement, to make sure the header and the implementation is consistent (and fix it for a case where it wasn't).	2008-04-28 10:22:05 +00:00
system-arm.h	Optimized byte-swapping macros for ARMv6.	2008-04-16 20:44:10 +00:00
system-pp502x.c	Fix warning.	2008-04-19 16:48:01 +00:00
system-pp5002.c	Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.	2007-11-27 01:20:26 +00:00
system-target.h	Fix freezing of some builds on PP5002. The PP5002 needs the not-sleep-at 0xNNNNNNN0-addresses fix everywhere when caching is enabled, not only in core_sleep(). Introduced a pair of inline functions to sleep and wake cores on PP for consistency.	2008-04-20 17:53:05 +00:00
usb-drv-arc.c	Added missing usb #includes to usb source files.	2008-05-03 07:10:21 +00:00
usb-fw-pp502x.c	Added missing usb #includes to usb source files.	2008-05-03 07:10:21 +00:00
usb-fw-pp5002.c
usb-target.h
wmcodec-pp.c	Do some crackdown on kernel object reinitialization after they could be in use and use before initialization. For c200/e200: Be sure fat cache and ata locks are acquired in the proper order during hot swapping. Delay hotswap monitoring until after initial file mounting (address 2nd kobj concern + possible call of fat driver before init).	2008-03-12 10:03:52 +00:00
wmcodec-telechips.c	More static / header file cleanup.	2008-05-03 23:18:56 +00:00