7a5d4011f5
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13174 a1c6a512-1295-4272-9138-f99709370657
108 lines
3.4 KiB
C
108 lines
3.4 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2002 by Linus Nielsen Feltzing
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
#include "cpu.h"
|
|
#include "system.h"
|
|
#include "kernel.h"
|
|
#include "thread.h"
|
|
#include "string.h"
|
|
#include "adc.h"
|
|
|
|
/**************************************************************************
|
|
** The A/D conversion is done every tick, in three steps:
|
|
**
|
|
** 1) On the tick interrupt, the conversion of channels 0-3 is started, and
|
|
** the A/D interrupt is enabled.
|
|
**
|
|
** 2) After the conversion is done (approx. 256*4 cycles later), an interrupt
|
|
** is generated at level 1, which is the same level as the tick interrupt
|
|
** itself. This interrupt will be pending until the tick interrupt is
|
|
** finished.
|
|
** When the A/D interrupt is finally served, it will read the results
|
|
** from the first conversion and start the conversion of channels 4-7.
|
|
**
|
|
** 3) When the conversion of channels 4-7 is finished, the interrupt is
|
|
** triggered again, and the results are read. This time, no new
|
|
** conversion is started, it will be done in the next tick interrupt.
|
|
**
|
|
** Thus, each channel will be updated HZ times per second.
|
|
**
|
|
*************************************************************************/
|
|
|
|
static int current_channel;
|
|
static unsigned short adcdata[NUM_ADC_CHANNELS];
|
|
|
|
static void adc_tick(void)
|
|
{
|
|
/* Start a conversion of channel group 0. This will trigger an interrupt,
|
|
and the interrupt handler will take care of group 1. */
|
|
|
|
current_channel = 0;
|
|
ADCSR = ADCSR_ADST | ADCSR_ADIE | ADCSR_SCAN | 3;
|
|
}
|
|
|
|
void ADITI(void) __attribute__((interrupt_handler));
|
|
void ADITI(void)
|
|
{
|
|
if(ADCSR & ADCSR_ADF)
|
|
{
|
|
ADCSR = 0;
|
|
|
|
if(current_channel == 0)
|
|
{
|
|
adcdata[0] = ADDRA >> 6;
|
|
adcdata[1] = ADDRB >> 6;
|
|
adcdata[2] = ADDRC >> 6;
|
|
adcdata[3] = ADDRD >> 6;
|
|
current_channel = 4;
|
|
|
|
/* Convert the next group */
|
|
ADCSR = ADCSR_ADST | ADCSR_ADIE | ADCSR_SCAN | 7;
|
|
}
|
|
else
|
|
{
|
|
adcdata[4] = ADDRA >> 6;
|
|
adcdata[5] = ADDRB >> 6;
|
|
adcdata[6] = ADDRC >> 6;
|
|
adcdata[7] = ADDRD >> 6;
|
|
}
|
|
}
|
|
}
|
|
|
|
unsigned short adc_read(int channel)
|
|
{
|
|
return adcdata[channel];
|
|
}
|
|
|
|
void adc_init(void)
|
|
{
|
|
ADCR = 0x7f; /* No external trigger; other bits should be 1 according
|
|
to the manual... */
|
|
|
|
ADCSR = 0;
|
|
|
|
current_channel = 0;
|
|
|
|
/* Enable the A/D IRQ on level 1 */
|
|
IPRE = (IPRE & 0xf0ff) | 0x0100;
|
|
|
|
tick_add_task(adc_tick);
|
|
|
|
sleep(2); /* Ensure valid readings when adc_init returns */
|
|
}
|