rockbox/firmware/target/coldfire/iriver/h300/adc-h300.c
Linus Nielsen Feltzing 516d277958 The ADC GPIO init code for the H100 was accidentally put in the H300 driver when moving to the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11582 a1c6a512-1295-4272-9138-f99709370657
2006-11-24 11:06:52 +00:00

75 lines
2 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Linus Nielsen Feltzing
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
#include "system.h"
#include "kernel.h"
#include "thread.h"
#include "adc.h"
#include "pcf50606.h"
static unsigned char adcdata[NUM_ADC_CHANNELS];
static int adcc2_parms[] =
{
[ADC_BUTTONS] = 0x80 | (5 << 1) | 1, /* ADCIN2 */
[ADC_REMOTE] = 0x80 | (6 << 1) | 1, /* ADCIN3 */
[ADC_BATTERY] = 0x80 | (0 << 1) | 1, /* BATVOLT, resistive divider */
[ADC_REMOTEDETECT] = 0x80 | (2 << 1) | 1, /* ADCIN1, resistive divider */
};
unsigned short adc_scan(int channel)
{
int level = set_irq_level(HIGHEST_IRQ_LEVEL);
unsigned char data;
pcf50606_write(0x2f, adcc2_parms[channel]);
data = pcf50606_read(0x30);
adcdata[channel] = data;
set_irq_level(level);
return data;
}
unsigned short adc_read(int channel)
{
return adcdata[channel];
}
static int adc_counter;
static void adc_tick(void)
{
if(++adc_counter == HZ)
{
adc_counter = 0;
adc_scan(ADC_BATTERY);
adc_scan(ADC_REMOTEDETECT); /* Temporary. Remove when the remote
detection feels stable. */
}
}
void adc_init(void)
{
adc_scan(ADC_BATTERY);
tick_add_task(adc_tick);
}