| .. |
|
gigabeat-s
|
Get rid of usb_drv_attach() from USB code.
|
2013-05-14 22:13:38 -04:00 |
|
app.lds
|
Make INITDATA_ATTR work on everything that has INIT_ATTR enabled for code.
|
2012-05-01 01:28:50 -04:00 |
|
ata-imx31.c
|
Commit to certain names for cache coherency APIs and discard the aliases.
|
2011-12-17 07:27:24 +00:00 |
|
ata-target.h
|
FS#12418 - Merge prototypes from ata-target.h files into new file ata-driver.h. After this change:
|
2011-12-08 21:23:53 +00:00 |
|
avic-imx31.c
|
i.MX31: Simplify nested interrupt handling. Give SVC mode its own stack by grabbing the FIQ stack that's just been taking up space. Just get rid of all FIQ setup since it isn't used anyway.
|
2011-10-14 00:01:41 +00:00 |
|
avic-imx31.h
|
i.MX31: Remove long udelay from DVFS interrupt handler
|
2013-05-11 21:09:01 -04:00 |
|
boot.lds
|
Do some things to make -ffunction-sections work better.
|
2011-12-17 01:43:32 +00:00 |
|
ccm-imx31.c
|
Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.
|
2010-06-30 02:02:46 +00:00 |
|
ccm-imx31.h
|
i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz, and 1.35V for 264MHz and 132MHz. Keep DPTC overdrive ( > 400MHz) voltage scaling off for now because of uncertainties. Simplify the (working) mess later.
|
2010-04-23 15:32:50 +00:00 |
|
crt0.S
|
arm: factor all exception handlers out of the crt0.S files
|
2012-04-06 13:46:32 +02:00 |
|
debug-imx31.c
|
remove debug-target.h
|
2012-05-07 00:55:59 -04:00 |
|
dvfs_dptc-imx31.c
|
i.MX31: Remove long udelay from DVFS interrupt handler
|
2013-05-11 21:09:01 -04:00 |
|
dvfs_dptc-imx31.h
|
i.MX31: Now that it matters because there's a debug screeen that allows changing things while running, some DVFS/DPTC stuff has to be done more carefully. Trim out some stuff and group functions better as well.
|
2011-01-23 20:21:35 +00:00 |
|
gpio-imx31.c
|
Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up.
|
2010-06-11 14:39:35 +00:00 |
|
gpio-imx31.h
|
i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.
|
2010-05-07 10:53:19 +00:00 |
|
i2c-imx31.c
|
i.MX31: Implement asynchronous version of I2C driver.
|
2011-12-29 05:15:36 +00:00 |
|
i2c-imx31.h
|
i.MX31: Implement asynchronous version of I2C driver.
|
2011-12-29 05:15:36 +00:00 |
|
iomuxc-imx31.c
|
Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.
|
2010-06-30 02:02:46 +00:00 |
|
iomuxc-imx31.h
|
|
|
|
mc13783-imx31.c
|
i.MX31: need an additional ISR lockout instance when closing driver.
|
2012-01-03 16:08:28 +00:00 |
|
mmu-imx31.c
|
|
|
|
mmu-imx31.h
|
|
|
|
rolo_restart_firmware.S
|
Fix assembler .size directives. Currently used binutils don't complain, but 2.21.1 treats these as errors.
|
2011-11-09 19:20:33 +00:00 |
|
sdma-imx31.c
|
Commit to certain names for cache coherency APIs and discard the aliases.
|
2011-12-17 07:27:24 +00:00 |
|
sdma-imx31.h
|
|
|
|
sdma_script_code.h
|
Some static data is only used by .init functions. Add .initdata to declare such data (otherwise section conflicts arise). For i.MX31, use INITDATA_ATTR in the appropriate places.
|
2011-01-08 20:42:51 +00:00 |
|
sdma_struct.h
|
|
|
|
serial-imx31.h
|
|
|
|
spi-imx31.c
|
i.MX31: Some tweaks with variable declaration in SPI driver.
|
2011-12-29 04:22:20 +00:00 |
|
spi-imx31.h
|
i.MX31: Rename something
|
2011-12-26 15:43:11 +00:00 |
|
uart-imx31.c
|
Split off target-specific parts from firmware/drivers/serial.c
|
2011-04-23 08:23:07 +00:00 |
91b850ec42