rockbox/firmware/export
Barry Wardell 14ed3ca8d8 In preparation for use with sansapatcher, change portalplayer bootloaders to read firmwares in mi4 format.
When loading the OF:
1) first try to load from a hidden disk partition
2) try loading /System/OF.mi4
3) finally fall back to loading /System/OF.bin which is what the old bootloader used.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12802 a1c6a512-1295-4272-9138-f99709370657
2007-03-16 14:28:00 +00:00
..
adc.h Target tree support for Iriver iFP. 2006-11-09 22:58:35 +00:00
arcotg_udc.h No functional changes, just reorganising code: 2007-02-16 22:13:21 +00:00
as3514.h Improved ADC driver for AS3514 (used in PP5024 - ie. Sansa e200) based off datasheet. 2007-03-13 01:50:13 +00:00
ata.h Do the CONFIG_LED define 2007-02-18 05:07:19 +00:00
ata_idle_notify.h dont allow the ata callbacks to be run less than once every 30s unless 2006-11-26 09:53:42 +00:00
ata_mmc.h Ondio: Fix multivolume and hotswap for the old MMC clock circuit. 2005-05-22 00:42:00 +00:00
audio.h Fix remaining CONFIG_TUNER checks. 2007-02-18 08:46:12 +00:00
backlight.h Fix CONFIG_BACKLIGHT warnings. 2007-02-18 10:07:27 +00:00
bidi.h waiting is over: initial unicode commit 2005-12-06 13:27:15 +00:00
bitswap.h
buffer.h mp3buf renamed to audiobuf 2005-04-05 11:33:58 +00:00
button.h Fix CONFIG_BACKLIGHT warnings. 2007-02-18 10:07:27 +00:00
config-e200.h In preparation for use with sansapatcher, change portalplayer bootloaders to read firmwares in mi4 format. 2007-03-16 14:28:00 +00:00
config-fmrecorder.h Add wake on alarm support for Ipods. Rename HAVE_ALARM_MOD to HAVE_ALARM_RTC since it's not always a mod. Make Ipod PCF driver keep other flags in OOCC1 that have been set instead of overwriting them. 2007-02-28 21:55:11 +00:00
config-gigabeat.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-h10.h In preparation for use with sansapatcher, change portalplayer bootloaders to read firmwares in mi4 format. 2007-03-16 14:28:00 +00:00
config-h10_5gb.h In preparation for use with sansapatcher, change portalplayer bootloaders to read firmwares in mi4 format. 2007-03-16 14:28:00 +00:00
config-h100.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-h120.h remove runtime detection of h1x0 series RTC MOD, but leave driver code 2007-03-03 00:11:20 +00:00
config-h300.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-iaudiom5.h Bring up the M5 port to a working stage: Extended numerous explicit checks for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim. 2007-03-05 00:04:00 +00:00
config-iaudiox5.h Use the browse button for A-B instead of quickscreen button. Files are 2007-03-02 00:37:03 +00:00
config-ifp7xx.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-ipod3g.h Fix sim builds. 2007-02-28 22:22:12 +00:00
config-ipod4g.h Fix sim builds. 2007-02-28 22:22:12 +00:00
config-ipodcolor.h Fix sim builds. 2007-02-28 22:22:12 +00:00
config-ipodmini.h Fix sim builds. 2007-02-28 22:22:12 +00:00
config-ipodmini2g.h Fix sim builds. 2007-02-28 22:22:12 +00:00
config-ipodnano.h Fix sim builds. 2007-02-28 22:22:12 +00:00
config-ipodvideo.h Fix sim builds. 2007-02-28 22:22:12 +00:00
config-ondiofm.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-ondiosp.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-player.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-recorder.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-recorderv2.h Add wake on alarm support for Ipods. Rename HAVE_ALARM_MOD to HAVE_ALARM_RTC since it's not always a mod. Make Ipod PCF driver keep other flags in OOCC1 that have been set instead of overwriting them. 2007-02-28 21:55:11 +00:00
config-tpj1022.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config.h Dual core support for PP502x players (iPod G4 and later, iriver h10, Sansa - iPod G3 will be coming soon.) This allows threads to be run on either core provided that all communications between the cores is done using uncached memory. There should be no significant change in battery life from doing this. Documentation (on the RockboxKernel wiki page) will follow shortly. 2007-03-04 20:06:41 +00:00
cpu.h Removed the Gmini 120 and Gmini SP code. These ports are dead, unfortunately. 2006-11-10 20:26:01 +00:00
debug.h Support building tagcache db natively on PC using the core of the 2006-11-10 08:03:33 +00:00
disk.h In preparation for use with sansapatcher, change portalplayer bootloaders to read firmwares in mi4 format. 2007-03-16 14:28:00 +00:00
ds2411.h iAudio X5: Enable reading of DS2411 serial number. See it under System|Debug|View HW info. 2007-03-11 13:59:31 +00:00
eeprom_24cxx.h eeprom driver for the h3x0 series, cleaned up the h1x0 series driver a bit, added debug entry for h3x0 that allows to write to the eeprom 2006-08-15 22:54:06 +00:00
eeprom_settings.h Prepare core support for the iriver bootloader supporting ROM images 2007-01-12 18:34:00 +00:00
enc_base.h SWCODEC Encoders: Better declarations of chunk flags. Mark constants as unsigned long to match structure variable type. 2007-02-10 07:19:32 +00:00
fat.h Remove unused code, make comments c-style, make one private function static 2007-02-25 15:44:55 +00:00
fmradio.h Change the radio screen and recording screen to use the global_status structure for state. I guess global_status had been added already and I missed it. :D 2007-02-07 04:24:21 +00:00
fmradio_i2c.h Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5. 2006-07-21 08:42:28 +00:00
font.h Use a larger font cache on the targets that can afford the (quite small) RAM usage 2007-03-05 08:32:35 +00:00
gdb_api.h Mapped iFP DRAM to 0xc00000 and enabled caching in this area. 2006-02-12 23:16:05 +00:00
general.h Forgot to use cvs add on a few new files in the fresh checkout I used. woops. 2006-11-06 18:18:05 +00:00
generic_i2c.h Removed executable flag 2007-01-09 23:29:07 +00:00
hangul.h Add support for loadable vkeyboard layouts 2006-03-29 16:21:42 +00:00
hwcompat.h Renamed has_new_lcd() to is_new_player(), and got rid of the alias 2004-11-22 21:20:54 +00:00
i2c-coldfire.h Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5. 2006-07-21 08:42:28 +00:00
i2c-pp.h Correct the (C) info 2007-02-27 21:22:29 +00:00
i2c.h
i2s.h Move I2S initialisation out of the Wolfson codec driver 2006-12-09 19:18:18 +00:00
id3.h remove numerical genre and use genre_string consistently: 2007-03-02 21:49:42 +00:00
isp1362.h Removed executable flag 2007-01-09 23:29:07 +00:00
kernel.h Optimized the gui list code performance, including automatic frame dropping and cpu boosting when button events are getting queued. Improved scrollwheel acceleration code is needed to notice a real change. 2007-03-11 10:52:36 +00:00
lcd-player-charset.h
lcd-remote.h Move target specific parts of the H100 remote LCD driver to target tree. 2007-02-25 22:09:14 +00:00
lcd.h Introduced LCD_FBHEIGHT in addition to the already existing LCD_FBWIDTH to ease framebuffer handling a bit. Added equivalent definitions for the remote LCD. 2007-02-20 19:31:34 +00:00
led.h removed old statusbar and buttonbar code 2005-11-20 01:02:14 +00:00
logf.h Support building tagcache db natively on PC using the core of the 2006-11-10 08:03:33 +00:00
m5636.h Removed executable flag 2007-01-09 23:29:07 +00:00
mas.h Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively. 2005-08-29 21:15:27 +00:00
mcf5249.h H300: (1) Use DMA for LCD updates, with auto-aligned line reads. Speeds up LCD updates by ~ 75% at 11MHz and 45MHz. Only ~ 11% speedup at 124MHz due to (2). (2) Less aggressive LCD transfer timing at 124MHz. With the previous timing, slightly corrupted display contents was reported, and with DMA transfers at least 4 waitstates are needed to make updates work at all. * A table in system-iriver.c shows settings for all integer multiples of the base clock frequency (info for developers, not yet complete). 2006-11-02 20:50:50 +00:00
mcf5250.h Some corrections for MCF5250 2006-02-22 20:48:27 +00:00
mp3_playback.h Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively. 2005-08-29 21:15:27 +00:00
mp3data.h Shave a few bytes off the binary size, especially on hwcodec targets 2007-02-15 22:55:22 +00:00
mpeg.h Hook up .cue file detection via a callback klugde on HWCODEC, to make cue sheet support actually work. 2007-03-01 00:26:24 +00:00
panic.h Better definition & usage of the ATTRIBUTE_PRINTF macro 2005-02-28 09:48:35 +00:00
pcf50605.h Move all iPod targets into the target tree. FS#5890 2006-10-05 10:58:51 +00:00
pcf50606.h Some more M5 adjustments. 2007-03-05 01:31:26 +00:00
pcm_playback.h Audio Init: Just can't stand that heirarchy. Add one level of abstraction. Might come in handy anyhow. Use sound.h instead of the conditional includes for audio hardware headers. If someone doesn't like that, yell at my evil twin. :) 2007-03-11 06:21:43 +00:00
pcm_record.h Place all recording functionality on pcmrec thread to serialize all recording operations. Button mash problems should be ruled out of pcm_record.c. Add additional lightweight checks by default and display any warnings that occurred during recording in first line of recording screen when they occur by blinking back and forth from warning display to normal line (Warning: <hex bitmask>). Warnings are cleared when beginning a new recording so write the number down if you see it and file a report. Add heavier checks when PCMREC_PARANOID is defined in the player config header (encoders and pcm_record must be aware of the define since it changes the chunk header format). These checks are mainly concerned with things that may cause skipping but also add unwanted overhead for normal operation. Best used with logf enabled. 2006-12-10 14:21:31 +00:00
pcm_sampr.h avoid using #if on undefined symbols, in preparation for -Wundef 2007-02-17 21:15:06 +00:00
pnx0101.h Iriver iFP7xx sound support. 2006-08-12 21:03:23 +00:00
power.h Fix remaining CONFIG_TUNER checks. 2007-02-18 08:46:12 +00:00
powermgmt.h Improved power management (FS#3001). Shutdown rockbox when the battery gets to a level where the device doesn't function properly. Calculate remaining charging time while charging (rather than remaining running time). Show "Low Battery" and "Battery Empty" warnings. Also fixes FS#4786. 2006-11-11 01:18:57 +00:00
pp5002.h Dual core support for PP502x players (iPod G4 and later, iriver h10, Sansa - iPod G3 will be coming soon.) This allows threads to be run on either core provided that all communications between the cores is done using uncached memory. There should be no significant change in battery life from doing this. Documentation (on the RockboxKernel wiki page) will follow shortly. 2007-03-04 20:06:41 +00:00
pp5020.h Dual core support for PP502x players (iPod G4 and later, iriver h10, Sansa - iPod G3 will be coming soon.) This allows threads to be run on either core provided that all communications between the cores is done using uncached memory. There should be no significant change in battery life from doing this. Documentation (on the RockboxKernel wiki page) will follow shortly. 2007-03-04 20:06:41 +00:00
pp5024.h added mostly dummy changes to allow building of a Sansa e200 bootloader 2006-08-01 22:28:14 +00:00
profile.h Fix profile builds 2006-08-24 13:10:20 +00:00
replaygain.h Add support for parsing binary data ID3 tags. Add support for parsing RVA2 ID3 tags for replaygain values instead of TXXX tags when playing files tagged with ID3v2.4. Patch by psyche78 (task #2937) 2006-07-20 10:35:20 +00:00
rolo.h Improved RoLo support for PortalPlayer - handles the COP correctly 2007-02-27 22:55:12 +00:00
rtc.h remove runtime detection of h1x0 series RTC MOD, but leave driver code 2007-03-03 00:11:20 +00:00
s3c2440.h Setup LCD ourselves; move LCD buffer and TTB to free up 1.7MB of memory 2007-01-13 02:24:15 +00:00
serial.h Logf output on the serial port for h100 targets 2006-10-12 20:22:16 +00:00
sh7034.h SH1: Changed UIE() to use the same reset method as on coldfire, using the watchdog timer. Should be more reliable this way. Disabled LED handling and added reboot-with-on for Ondio. * All: #ifdef cleanup in panicf(), added reboot-with-on for Ondio. 2005-11-09 00:54:43 +00:00
sound.h Oops, missed a file from r12727 2007-03-11 17:58:14 +00:00
spdif.h H100/General: HAL for S/PDIF and refinement/bufixes in optical output powering/source selection. 2006-11-13 23:21:54 +00:00
structec.h Make database endianess independent. 2007-02-13 21:51:18 +00:00
sw_i2c.h FS#6419 - driver for H1x0 series RTC Mod with runtime detection 2007-02-28 13:20:36 +00:00
system.h Fix red builds and make udelay actually work as it should again. 2007-03-10 12:41:52 +00:00
thread.h Back to green? 2007-03-09 08:17:05 +00:00
timer.h Change if CONFIG_CPU==PP50XX to ifdef CPU_PP where appropriate 2006-11-22 00:41:30 +00:00
tlv320.h put back the return types which got lost in the previous commit 2006-12-06 13:48:50 +00:00
tuner.h Fix remaining CONFIG_TUNER checks. 2007-02-18 08:46:12 +00:00
uda1380.h put back the return types which got lost in the previous commit 2006-12-06 13:48:50 +00:00
usb.h FS#4770 - Add USB charging for the H300 series 2007-02-01 10:47:22 +00:00
usb_serial.h Added non-blocking get/put_byte routines. 2006-02-03 23:28:53 +00:00
wm8731l.h FS#6096. Recording on PortalPlayer targets (H10, iPod Video, iPod 4g, iPod Color, iPod Nano). 2006-12-18 01:52:21 +00:00
wm8758.h FS#6096. Recording on PortalPlayer targets (H10, iPod Video, iPod 4g, iPod Color, iPod Nano). 2006-12-18 01:52:21 +00:00
wm8975.h move some audio driver specific code to the correspoding files 2006-12-06 13:34:15 +00:00
wmcodec.h Move I2S initialisation out of the Wolfson codec driver 2006-12-09 19:18:18 +00:00