rockbox/firmware/export/mmc.h
Amaury Pouly 41bf9ebc89 imx233: simplify sd/mmc driver
Further merge drivers by using the same command and data functions.
No use one mutex per drive instead of a global sd lock. Fix the
RCA handling which was different between SD and MMC (shifted 16)
and thus confusing. Add MMC commands definition to the mmc.h
header similarly to the SD one. Change MMC handling a bit by
selecting/deselecting on each transfer like SD, which allows
for several MMC devices in theory and is more uniform.

Change-Id: I7024cb19c079553806138ead75b00640f1d2d95c
2012-08-21 16:28:36 +02:00

109 lines
3.7 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Alan Korr
* Copyright (C) 2008 by Frank Gevaerts
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef __MMC_H__
#define __MMC_H__
#include <stdbool.h>
#include "config.h"
#include "mv.h" /* for HAVE_MULTIDRIVE or not */
struct storage_info;
void mmc_enable(bool on);
void mmc_spindown(int seconds);
void mmc_sleep(void);
void mmc_sleepnow(void);
bool mmc_disk_is_active(void);
int mmc_soft_reset(void);
int mmc_init(void) STORAGE_INIT_ATTR;
void mmc_close(void);
int mmc_read_sectors(IF_MD2(int drive,) unsigned long start, int count, void* buf);
int mmc_write_sectors(IF_MD2(int drive,) unsigned long start, int count, const void* buf);
void mmc_spin(void);
int mmc_spinup_time(void);
#ifdef STORAGE_GET_INFO
void mmc_get_info(IF_MD2(int drive,) struct storage_info *info);
#endif
#ifdef HAVE_HOTSWAP
bool mmc_removable(IF_MD_NONVOID(int drive));
bool mmc_present(IF_MD_NONVOID(int drive));
#endif
long mmc_last_disk_activity(void);
#ifdef CONFIG_STORAGE_MULTI
int mmc_num_drives(int first_drive);
#endif
/* MMC States */
#define MMC_IDLE 0
#define MMC_READY 1
#define MMC_IDENT 2
#define MMC_STBY 3
#define MMC_TRAN 4
#define MMC_DATA 5
#define MMC_RCV 6
#define MMC_PRG 7
#define MMC_DIS 8
#define MMC_BTST 9
/* MMC Commands */
#define MMC_GO_IDLE_STATE 0
#define MMC_SEND_OP_COND 1
#define MMC_ALL_SEND_CID 2
#define MMC_SET_RELATIVE_ADDR 3
#define MMC_SET_DSR 4
#define MMC_SWITCH 6
#define MMC_SELECT_CARD 7 /* with card's rca */
#define MMC_DESELECT_CARD 7 /* with rca = 0 */
#define MMC_SEND_EXT_CSD 8
#define MMC_SEND_CSD 9
#define MMC_SEND_CID 10
#define MMC_READ_DAT_UNTIL_STOP 11
#define MMC_STOP_TRANSMISSION 12
#define MMC_SEND_STATUS 13
#define MMC_BUSTEST_R 14
#define MMC_GO_INACTIVE_STATE 15
#define MMC_SET_BLOCKLEN 16
#define MMC_READ_SINGLE_BLOCK 17
#define MMC_READ_MULTIPLE_BLOCK 18
#define MMC_BUSTEST_W 19
#define MMC_WRITE_DAT_UNTIL_STOP 20
#define MMC_SET_BLOCK_COUNT 23
#define MMC_WRITE_BLOCK 24
#define MMC_WRITE_MULTIPLE_BLOCK 25
#define MMC_PROGRAM_CID 26
#define MMC_PROGRAM_CSD 27
#define MMC_SET_WRITE_PROT 28
#define MMC_CLR_WRITE_PROT 29
#define MMC_SEND_WRITE_PROT 30
#define MMC_ERASE_GROUP_START 35
#define MMC_ERASE_GROUP_END 36
#define MMC_ERASE 38
#define MMC_FAST_IO 39
#define MMC_GO_IRQ_STATE 40
#define MMC_LOCK_UNLOCK 42
#define MMC_APP_CMD 55
#define MMC_GEN_CMD 56
#endif