Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/as3525/debug-as3525.c
Rafaël Carré 8fe22bd4b8 as3525v2: show adc channels in the debug menu 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26150 a1c6a512-1295-4272-9138-f99709370657
2010-05-18 20:01:49 +00:00

560 lines
19 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright © 2008 Rafaël Carré
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include <stdbool.h>
#include "debug-target.h"
#include "button.h"
#include "lcd.h"
#include "font.h"
#include "system.h"
#include "cpu.h"
#include "pl180.h"
#include "ascodec-target.h"
#include "adc.h"
#include "storage.h"
#define ON "Enabled"
#define OFF "Disabled"
#define CP15_MMU (1<<0) /* mmu off/on */
#define CP15_DC (1<<2) /* dcache off/on */
#define CP15_IC (1<<12) /* icache off/on */
#define CLK_MAIN 24000000 /* 24 MHz */
#define CLK_PLLA 0
#define CLK_PLLB 1
#define CLK_PROC 2
#define CLK_FCLK 3
#define CLK_EXTMEM 4
#define CLK_PCLK 5
#define CLK_IDE 6
#define CLK_I2C 7
#define CLK_I2SI 8
#define CLK_I2SO 9
#define CLK_DBOP 10
#define CLK_SD_MCLK_NAND 11
#define CLK_SD_MCLK_MSD 12
#define CLK_USB 13
#define I2C2_CPSR0 *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x1C))
#define I2C2_CPSR1 *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x20))
#define MCI_NAND *((volatile unsigned long *)(NAND_FLASH_BASE + 0x04))
#define MCI_SD *((volatile unsigned long *)(SD_MCI_BASE + 0x04))
extern bool sd_enabled;
/* FIXME: target tree is including ./debug-target.h rather than the one in
* sansa-fuze/, even though deps contains the correct one
* if I put the below into a sansa-fuze/debug-target.h, it doesn't work*/
#if defined(SANSA_FUZE) || defined(SANSA_E200V2) || defined(SANSA_C200V2)
#define DEBUG_DBOP
#include "dbop-as3525.h"
#endif
static inline unsigned read_cp15 (void)
{
unsigned cp15_value;
asm volatile (
"mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" : "=r"(cp15_value));
return (cp15_value);
}
static int calc_freq(int clk)
{
unsigned int prediv = ((unsigned int)CGU_PROC>>2) & 0x3;
unsigned int postdiv = ((unsigned int)CGU_PROC>>4) & 0xf;
#if CONFIG_CPU == AS3525
int out_div;
switch(clk) {
/* clk_main = clk_int = 24MHz oscillator */
case CLK_PLLA:
if(CGU_PLLASUP & (1<<3))
return 0;
/*assume 24MHz oscillator only input available */
out_div = ((CGU_PLLA>>13) & 0x3); /* bits 13:14 */
if (out_div == 3) /* for 11 NO=4 */
out_div=4;
if(out_div) /* NO = 0 not allowed */
return ((2 * (CGU_PLLA & 0xff))*CLK_MAIN)/
(((CGU_PLLA>>8) & 0x1f)*out_div);
return 0;
case CLK_PLLB:
if(CGU_PLLBSUP & (1<<3))
return 0;
/*assume 24MHz oscillator only input available */
out_div = ((CGU_PLLB>>13) & 0x3); /* bits 13:14 */
if (out_div == 3) /* for 11 NO=4 */
out_div=4;
if(out_div) /* NO = 0 not allowed */
return ((2 * (CGU_PLLB & 0xff))*CLK_MAIN)/
(((CGU_PLLB>>8) & 0x1f)*out_div);
return 0;
#else
/* AS3525v2 */
switch(clk) {
/* we're using a known setting for PLLA = 240 MHz and PLLB inop */
case CLK_PLLA:
return 240000000;
case CLK_PLLB:
return 0;
#endif
case CLK_PROC:
#if CONFIG_CPU == AS3525 /* not in arm926-ejs */
if (!(read_cp15()>>30)) /* fastbus */
return calc_freq(CLK_PCLK);
else /* Synch or Asynch bus*/
#endif /* CONFIG_CPU == AS3525 */
return calc_freq(CLK_FCLK);
case CLK_FCLK:
switch(CGU_PROC & 3) {
case 0:
return (CLK_MAIN * (8 - prediv)) / (8 * (postdiv + 1));
case 1:
return (calc_freq(CLK_PLLA) * (8 - prediv)) /
(8 * (postdiv + 1));
case 2:
return (calc_freq(CLK_PLLB) * (8 - prediv)) /
(8 * (postdiv + 1));
default:
return 0;
}
case CLK_EXTMEM:
#if CONFIG_CPU == AS3525
switch(CGU_PERI & 3) {
#else
/* bits 1:0 of CGU_PERI always read as 0 and source = FCLK */
switch(3) {
#endif
case 0:
return CLK_MAIN/(((CGU_PERI>>2)& 0xf)+1);
case 1:
return calc_freq(CLK_PLLA)/(((CGU_PERI>>2)& 0xf)+1);
case 2:
return calc_freq(CLK_PLLB)/(((CGU_PERI>>2)& 0xf)+1);
case 3:
default:
return calc_freq(CLK_FCLK)/(((CGU_PERI>>2)& 0xf)+1);
}
case CLK_PCLK:
return calc_freq(CLK_EXTMEM)/(((CGU_PERI>>6)& 0x1)+1);
case CLK_IDE:
switch(CGU_IDE & 3) {
case 0:
return CLK_MAIN/(((CGU_IDE>>2)& 0xf)+1);
case 1:
return calc_freq(CLK_PLLA)/(((CGU_IDE>>2)& 0xf)+1);
case 2:
return calc_freq(CLK_PLLB)/(((CGU_IDE>>2)& 0xf)+1);
default:
return 0;
}
case CLK_I2C:
return calc_freq(CLK_PCLK)/AS3525_I2C_PRESCALER;
case CLK_I2SI:
switch((CGU_AUDIO>>12) & 3) {
case 0:
return CLK_MAIN/(((CGU_AUDIO>>14) & 0x1ff)+1);
case 1:
return calc_freq(CLK_PLLA)/(((CGU_AUDIO>>14) & 0x1ff)+1);
case 2:
return calc_freq(CLK_PLLB)/(((CGU_AUDIO>>14) & 0x1ff)+1);
default:
return 0;
}
case CLK_I2SO:
switch(CGU_AUDIO & 3) {
case 0:
return CLK_MAIN/(((CGU_AUDIO>>2) & 0x1ff)+1);
case 1:
return calc_freq(CLK_PLLA)/(((CGU_AUDIO>>2) & 0x1ff)+1);
case 2:
return calc_freq(CLK_PLLB)/(((CGU_AUDIO>>2) & 0x1ff)+1);
default:
return 0;
}
case CLK_DBOP:
return calc_freq(CLK_PCLK)/((CGU_DBOP & 7)+1);
#if CONFIG_CPU == AS3525
case CLK_SD_MCLK_NAND:
if(!(MCI_NAND & (1<<8)))
return 0;
else if(MCI_NAND & (1<<10))
return calc_freq(CLK_IDE);
else
return calc_freq(CLK_IDE)/(((MCI_NAND & 0xff)+1)*2);
case CLK_SD_MCLK_MSD:
if(!(MCI_SD & (1<<8)))
return 0;
else if(MCI_SD & (1<<10))
return calc_freq(CLK_PCLK);
else
return calc_freq(CLK_PCLK)/(((MCI_SD & 0xff)+1)*2);
#endif
case CLK_USB:
switch(CGU_USB & 3) { /* 0-> div=1 other->div=1/(2*n) */
case 0:
if (!((CGU_USB>>2) & 0x7))
return CLK_MAIN;
else
return CLK_MAIN/(2*((CGU_USB>>2) & 0x7));
case 1:
if (!((CGU_USB>>2) & 0x7))
return calc_freq(CLK_PLLA);
else
return calc_freq(CLK_PLLA)/(2*((CGU_USB>>2) & 0x7));
case 2:
if (!((CGU_USB>>2) & 0x7))
return calc_freq(CLK_PLLB);
else
return calc_freq(CLK_PLLB)/(2*((CGU_USB>>2) & 0x7));
default:
return 0;
}
default:
return 0;
}
}
bool __dbg_hw_info(void)
{
int line;
#if CONFIG_CPU == AS3525
int last_nand = 0;
#ifdef HAVE_MULTIDRIVE
int last_sd = 0;
#endif
#endif /* CONFIG_CPU == AS3525 */
lcd_clear_display();
lcd_setfont(FONT_SYSFIXED);
while(1)
{
while(1)
{
#ifdef SANSA_C200V2
extern int dbop_denoise_accept;
extern int dbop_denoise_reject;
lcd_clear_display();
line = 0;
lcd_puts(0, line++, "[Submodel:]");
lcd_putsf(0, line++, "C200v2 variant %d", c200v2_variant);
if (dbop_denoise_accept) {
lcd_putsf(0, line++, "DBOP noise: %d%%",
(100*dbop_denoise_reject)/dbop_denoise_accept);
} else {
lcd_puts(0, line++, "DBOP noise: oo");
}
lcd_putsf(0, line++, "reject: %d", dbop_denoise_reject);
lcd_putsf(0, line++, "accept: %d", dbop_denoise_accept);
lcd_update();
int btn = button_get_w_tmo(HZ/10);
if(btn == (DEBUG_CANCEL|BUTTON_REL))
goto end;
else if(btn == (BUTTON_DOWN|BUTTON_REL))
break;
}
while(1)
{
#endif
lcd_clear_display();
line = 0;
lcd_puts(0, line++, "[Clock Frequencies:]");
lcd_puts(0, line++, " SET ACTUAL");
#if CONFIG_CPU == AS3525
lcd_putsf(0, line++, "922T:%s %3dMHz",
(!(read_cp15()>>30)) ? "FAST " :
(read_cp15()>>31) ? "ASYNC" : "SYNC ",
#else
lcd_putsf(0, line++, "926ejs: %3dMHz",
#endif
calc_freq(CLK_PROC)/1000000);
lcd_putsf(0, line++, "PLLA:%3dMHz %3dMHz", AS3525_PLLA_FREQ/1000000,
calc_freq(CLK_PLLA)/1000000);
lcd_putsf(0, line++, "PLLB: %3dMHz", calc_freq(CLK_PLLB)/1000000);
lcd_putsf(0, line++, "FCLK: %3dMHz", calc_freq(CLK_FCLK)/1000000);
lcd_putsf(0, line++, "DRAM:%3dMHz %3dMHz", AS3525_PCLK_FREQ/1000000,
calc_freq(CLK_EXTMEM)/1000000);
lcd_putsf(0, line++, "PCLK:%3dMHz %3dMHz", AS3525_PCLK_FREQ/1000000,
calc_freq(CLK_PCLK)/1000000);
#if LCD_HEIGHT < 176 /* clip */
lcd_update();
int btn = button_get_w_tmo(HZ/10);
if(btn == (DEBUG_CANCEL|BUTTON_REL))
goto end;
else if(btn == (BUTTON_DOWN|BUTTON_REL))
break;
}
while(1)
{
lcd_clear_display();
line = 0;
#endif /* LCD_HEIGHT < 176 */
lcd_putsf(0, line++, "IDE :%3dMHz %3dMHz", AS3525_IDE_FREQ/1000000,
calc_freq(CLK_IDE)/1000000);
lcd_putsf(0, line++, "DBOP:%3dMHz %3dMHz", AS3525_DBOP_FREQ/1000000,
calc_freq(CLK_DBOP)/1000000);
lcd_putsf(0, line++, "I2C :%3dkHz %3dkHz", AS3525_I2C_FREQ/1000,
calc_freq(CLK_I2C)/1000);
lcd_putsf(0, line++, "I2SI: %s %3dMHz", (CGU_AUDIO & (1<<23)) ?
"on " : "off" , calc_freq(CLK_I2SI)/1000000);
lcd_putsf(0, line++, "I2SO: %s %3dMHz", (CGU_AUDIO & (1<<11)) ?
"on " : "off", calc_freq(CLK_I2SO)/1000000);
#if CONFIG_CPU == AS3525
/* If disabled, enable SD cards so we can read the registers */
if(sd_enabled == false)
{
sd_enable(true);
last_nand = MCI_NAND;
#ifdef HAVE_MULTIDRIVE
last_sd = MCI_SD;
#endif
sd_enable(false);
}
lcd_putsf(0, line++, "SD :%3dMHz %3dMHz",
((AS3525_IDE_FREQ/ 1000000) /
((last_nand & MCI_CLOCK_BYPASS)? 1:(((last_nand & 0xff)+1) * 2))),
calc_freq(CLK_SD_MCLK_NAND)/1000000);
#ifdef HAVE_MULTIDRIVE
lcd_putsf(0, line++, "uSD :%3dMHz %3dMHz",
((AS3525_PCLK_FREQ/ 1000000) /
((last_sd & MCI_CLOCK_BYPASS) ? 1: (((last_sd & 0xff) + 1) * 2))),
calc_freq(CLK_SD_MCLK_MSD)/1000000);
#endif
#endif /* CONFIG_CPU == AS3525 */
lcd_putsf(0, line++, "USB : %3dMHz", calc_freq(CLK_USB)/1000000);
#if LCD_HEIGHT < 176 /* clip */
lcd_update();
int btn = button_get_w_tmo(HZ/10);
if(btn == (DEBUG_CANCEL|BUTTON_REL))
goto end;
else if(btn == (BUTTON_DOWN|BUTTON_REL))
break;
}
while(1)
{
lcd_clear_display();
line = 0;
#endif /* LCD_HEIGHT < 176 */
lcd_putsf(0, line++, "MMU : %s CVDDP:%4d", (read_cp15() & CP15_MMU) ?
" on" : "off", adc_read(ADC_CVDD) * 25);
lcd_putsf(0, line++, "Icache:%s Dcache:%s",
(read_cp15() & CP15_IC) ? " on" : "off",
(read_cp15() & CP15_DC) ? " on" : "off");
lcd_update();
int btn = button_get_w_tmo(HZ/10);
if(btn == (DEBUG_CANCEL|BUTTON_REL))
goto end;
else if(btn == (BUTTON_DOWN|BUTTON_REL))
break;
}
while(1)
{
lcd_clear_display();
line = 0;
lcd_putsf(0, line++, "CGU_PLLA :%8x", (unsigned int)(CGU_PLLA));
lcd_putsf(0, line++, "CGU_PLLB :%8x", (unsigned int)(CGU_PLLB));
lcd_putsf(0, line++, "CGU_PROC :%8x", (unsigned int)(CGU_PROC));
lcd_putsf(0, line++, "CGU_PERI :%8x", (unsigned int)(CGU_PERI));
lcd_putsf(0, line++, "CGU_IDE :%8x", (unsigned int)(CGU_IDE));
lcd_putsf(0, line++, "CGU_DBOP :%8x", (unsigned int)(CGU_DBOP));
lcd_putsf(0, line++, "CGU_AUDIO :%8x", (unsigned int)(CGU_AUDIO));
lcd_putsf(0, line++, "CGU_USB :%8x", (unsigned int)(CGU_USB));
#if LCD_HEIGHT < 176 /* clip */
lcd_update();
int btn = button_get_w_tmo(HZ/10);
if(btn == (DEBUG_CANCEL|BUTTON_REL))
goto end;
else if(btn == (BUTTON_DOWN|BUTTON_REL))
break;
}
while(1)
{
lcd_clear_display();
line = 0;
#endif /* LCD_HEIGHT < 176 */
lcd_putsf(0, line++, "I2C2_CPSR :%8x", (unsigned int)(I2C2_CPSR1<<8 |
I2C2_CPSR0));
#if CONFIG_CPU == AS3525
lcd_putsf(0, line++, "MCI_NAND :%8x", (unsigned int)(MCI_NAND));
lcd_putsf(0, line++, "MCI_SD :%8x", (unsigned int)(MCI_SD));
#else
lcd_putsf(0, line++, "CGU_MEMSTK:%8x", (unsigned int)(CGU_MEMSTICK));
lcd_putsf(0, line++, "CGU_SDSLOT:%8x", (unsigned int)(CGU_SDSLOT));
#endif
lcd_update();
int btn = button_get_w_tmo(HZ/10);
if(btn == (DEBUG_CANCEL|BUTTON_REL))
goto end;
else if(btn == (BUTTON_DOWN|BUTTON_REL))
break;
}
}
end:
lcd_setfont(FONT_UI);
return false;
}
bool __dbg_ports(void)
{
int line, btn, i;
lcd_setfont(FONT_SYSFIXED);
while(1)
{
lcd_clear_display();
while(1)
{
line = 0;
lcd_puts(0, line++, "[GPIO Vals and Dirs]");
lcd_putsf(0, line++, "GPIOA: %2x DIR: %2x", GPIOA_DATA, GPIOA_DIR);
lcd_putsf(0, line++, "GPIOB: %2x DIR: %2x", GPIOB_DATA, GPIOB_DIR);
lcd_putsf(0, line++, "GPIOC: %2x DIR: %2x", GPIOC_DATA, GPIOC_DIR);
lcd_putsf(0, line++, "GPIOD: %2x DIR: %2x", GPIOD_DATA, GPIOD_DIR);
#ifdef DEBUG_DBOP
line++;
lcd_puts(0, line++, "[DBOP_DIN]");
lcd_putsf(0, line++, "DBOP_DIN: %4x", dbop_debug());
#endif
line++;
lcd_puts(0, line++, "[CP15]");
lcd_putsf(0, line++, "CP15: 0x%8x", read_cp15());
lcd_update();
if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL))
break;
btn = button_get_w_tmo(HZ/10);
if(btn == (DEBUG_CANCEL|BUTTON_REL))
goto end;
else if(btn == (BUTTON_DOWN|BUTTON_REL))
break;
}
#if CONFIG_CPU == AS3525 /* as3525v2 channels are different */
#define BATTEMP_UNIT 5/2 /* 2.5mV */
static const char *adc_name[13] = {
"CHG_OUT ",
"RTCSUP ",
"VBUS ",
"CHG_IN ",
"CVDD ",
"BatTemp ",
"MicSup1 ",
"MicSup2 ",
"VBE1 ",
"VBE2 ",
"I_MicSup1",
"I_MicSup2",
"VBAT ",
};
#elif CONFIG_CPU == AS3525v2
#define BATTEMP_UNIT 2 /* 2mV */
static const char *adc_name[16] = {
"BVDD ",
"BVDDR ",
"CHGIN ",
"CHGOUT ",
"VBUS ",
NULL,
"BatTemp ",
NULL,
"MicSup ",
NULL,
"I_MiSsup",
NULL,
"VBE_1uA ",
"VBE_2uA ",
"I_CHGact",
"I_CHGref",
};
#endif
lcd_clear_display();
while(1)
{
line = 0;
for(i=0; i<5; i++)
lcd_putsf(0, line++, "%s: %d mV", adc_name[i], adc_read(i) * 5);
for(; i<8; i++)
if(adc_name[i])
lcd_putsf(0, line++, "%s: %d mV", adc_name[i],
adc_read(i) * BATTEMP_UNIT);
#if LCD_HEIGHT < 176 /* clip */
lcd_update();
btn = button_get_w_tmo(HZ/10);
if(btn == (DEBUG_CANCEL|BUTTON_REL))
goto end;
else if(btn == (BUTTON_DOWN|BUTTON_REL))
break;
}
lcd_clear_display();
while(1)
{
line = 0;
#endif /* LCD_HEIGHT < 176 */
for(i=8; i<10; i++)
if(adc_name[i])
lcd_putsf(0, line++, "%s: %d mV", adc_name[i], adc_read(i));
for(; i<12; i++)
if(adc_name[i])
lcd_putsf(0, line++, "%s: %d uA", adc_name[i], adc_read(i));
#if CONFIG_CPU == AS3525 /* different units */
lcd_putsf(0, line++, "%s: %d mV", adc_name[i], adc_read(i)*5/2);
#elif CONFIG_CPU == AS3525v2
for(; i<16; i++)
lcd_putsf(0, line++, "%s: %d mV", adc_name[i], adc_read(i));
#endif
lcd_update();
btn = button_get_w_tmo(HZ/10);
if(btn == (DEBUG_CANCEL|BUTTON_REL))
goto end;
else if(btn == (BUTTON_DOWN|BUTTON_REL))
break;
}
}
end:
lcd_setfont(FONT_UI);
return false;
}
Reference in a new issue View git blame Copy permalink