rockbox/firmware/export/audiohw.h
Andrew Ryabinin 3a97e12fc5 Introduce HiFi E.T. MA8/MA8C ports.
HiFi E.T. MA8 is almost the same as MA9 except
another DAC(pcm1792 in ma8, df1704 in ma9).

MA8 has ILI9342 lcd, MA8C has ILI9342C lcd.

Change-Id: If2ac04f5a3382590b2a392c46286559f54b2ed6a
2013-11-05 09:59:45 +04:00

561 lines
14 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by Christian Gmeiner
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef _AUDIOHW_H_
#define _AUDIOHW_H_
#include "config.h"
#include <stdbool.h>
#include <inttypes.h>
/* define some audiohw caps */
#define TREBLE_CAP (1 << 0)
#define BASS_CAP (1 << 1)
#define BALANCE_CAP (1 << 2)
#define CLIPPING_CAP (1 << 3)
#define PRESCALER_CAP (1 << 4)
#define BASS_CUTOFF_CAP (1 << 5)
#define TREBLE_CUTOFF_CAP (1 << 6)
#define EQ_CAP (1 << 7)
#define DEPTH_3D_CAP (1 << 8)
#define LINEOUT_CAP (1 << 9)
#define MONO_VOL_CAP (1 << 10)
#define LIN_GAIN_CAP (1 << 11)
#define MIC_GAIN_CAP (1 << 12)
#define FILTER_ROLL_OFF_CAP (1 << 13)
/* Used by every driver to export its min/max/default values for its audio
settings. */
#ifdef AUDIOHW_IS_SOUND_C
/* This is the master file with the settings table... */
struct sound_settings_info
{
const char *unit;
char numdecimals;
char steps;
short minval;
short maxval;
short defaultval;
};
#undef AUDIOHW_SETTING /* will have been #defined in config.h as empty */
#define AUDIOHW_SETTING(name, us, nd, st, minv, maxv, defv, expr...) \
static const struct sound_settings_info _audiohw_setting_##name = \
{ .unit = us, .numdecimals = nd, .steps = st, \
.minval = minv, .maxval = maxv, .defaultval = defv }; \
static inline int _sound_val2phys_##name(int val) \
{ return #expr[0] ? expr : val; }
#endif
#ifdef HAVE_UDA1380
#include "uda1380.h"
#elif defined(HAVE_UDA1341)
#include "uda1341.h"
#elif defined(HAVE_WM8750) || defined(HAVE_WM8751)
#include "wm8751.h"
#elif defined(HAVE_WM8978)
#include "wm8978.h"
#elif defined(HAVE_WM8975)
#include "wm8975.h"
#elif defined(HAVE_WM8985)
#include "wm8985.h"
#elif defined(HAVE_WM8758)
#include "wm8758.h"
#elif defined(HAVE_WM8711) || defined(HAVE_WM8721) || \
defined(HAVE_WM8731)
#include "wm8731.h"
#elif defined(HAVE_TLV320)
#include "tlv320.h"
#elif defined(HAVE_AS3514)
#include "as3514.h"
#elif defined(HAVE_MAS35XX)
#include "mas35xx.h"
#if defined(HAVE_DAC3550A)
#include "dac3550a.h"
#endif /* HAVE_DAC3550A */
#elif defined(HAVE_TSC2100)
#include "tsc2100.h"
#elif defined(HAVE_JZ4740_CODEC)
#include "jz4740-codec.h"
#elif defined(HAVE_AK4537)
#include "ak4537.h"
#elif defined(HAVE_RK27XX_CODEC)
#include "rk27xx_codec.h"
#elif defined(HAVE_AIC3X)
#include "aic3x.h"
#elif defined(HAVE_CS42L55)
#include "cs42l55.h"
#elif defined(HAVE_IMX233_CODEC)
#include "imx233-codec.h"
#elif defined(HAVE_DUMMY_CODEC)
#include "dummy_codec.h"
#elif defined(HAVE_DF1704_CODEC)
#include "df1704.h"
#elif defined(HAVE_PCM1792_CODEC)
#include "pcm1792.h"
#elif (CONFIG_PLATFORM & (PLATFORM_ANDROID | PLATFORM_MAEMO\
| PLATFORM_PANDORA | PLATFORM_SDL))
#include "hosted_codec.h"
#endif
/* convert caps into defines */
#ifdef AUDIOHW_CAPS
/* Tone controls */
#if (AUDIOHW_CAPS & TREBLE_CAP)
#define AUDIOHW_HAVE_TREBLE
#endif
#if (AUDIOHW_CAPS & BASS_CAP)
#define AUDIOHW_HAVE_BASS
#endif
#if (AUDIOHW_CAPS & BASS_CUTOFF_CAP)
#define AUDIOHW_HAVE_BASS_CUTOFF
#endif
#if (AUDIOHW_CAPS & TREBLE_CUTOFF_CAP)
#define AUDIOHW_HAVE_TREBLE_CUTOFF
#endif
#if (AUDIOHW_CAPS & BALANCE_CAP)
#define AUDIOHW_HAVE_BALANCE
#endif
#if (AUDIOHW_CAPS & CLIPPING_CAP)
#define AUDIOHW_HAVE_CLIPPING
#endif
#if (AUDIOHW_CAPS & PRESCALER_CAP)
#define AUDIOHW_HAVE_PRESCALER
#endif
/* Hardware EQ tone controls */
#if (AUDIOHW_CAPS & EQ_CAP)
/* A hardware equalizer is present (or perhaps some tone control variation
* that is not Bass and/or Treble) */
#define AUDIOHW_HAVE_EQ
/* Defined band indexes for supported bands */
enum
{
/* Band 1 is implied; bands must be contiguous, 1 to N */
AUDIOHW_EQ_BAND1,
#define AUDIOHW_HAVE_EQ_BAND1
#if (AUDIOHW_EQ_BAND_CAPS & (EQ_CAP << 1))
AUDIOHW_EQ_BAND2,
#define AUDIOHW_HAVE_EQ_BAND2
#if (AUDIOHW_EQ_BAND_CAPS & (EQ_CAP << 2))
AUDIOHW_EQ_BAND3,
#define AUDIOHW_HAVE_EQ_BAND3
#if (AUDIOHW_EQ_BAND_CAPS & (EQ_CAP << 3))
AUDIOHW_EQ_BAND4,
#define AUDIOHW_HAVE_EQ_BAND4
#if (AUDIOHW_EQ_BAND_CAPS & (EQ_CAP << 4))
AUDIOHW_EQ_BAND5,
#define AUDIOHW_HAVE_EQ_BAND5
#endif /* 5 */
#endif /* 4 */
#endif /* 3 */
#endif /* 2 */
AUDIOHW_EQ_BAND_NUM, /* Keep last */
};
#ifdef AUDIOHW_EQ_FREQUENCY_CAPS
/* One or more bands supports frequency cutoff or center adjustment */
#define AUDIOHW_HAVE_EQ_FREQUENCY
enum
{
#if defined(AUDIOHW_HAVE_EQ_BAND1) && \
(AUDIOHW_EQ_FREQUENCY_CAPS & (EQ_CAP << 0))
AUDIOHW_EQ_BAND1_FREQUENCY,
#define AUDIOHW_HAVE_EQ_BAND1_FREQUENCY
#endif
#if defined(AUDIOHW_HAVE_EQ_BAND2) && \
(AUDIOHW_EQ_FREQUENCY_CAPS & (EQ_CAP << 1))
AUDIOHW_EQ_BAND2_FREQUENCY,
#define AUDIOHW_HAVE_EQ_BAND2_FREQUENCY
#endif
#if defined(AUDIOHW_HAVE_EQ_BAND3) && \
(AUDIOHW_EQ_FREQUENCY_CAPS & (EQ_CAP << 2))
AUDIOHW_EQ_BAND3_FREQUENCY,
#define AUDIOHW_HAVE_EQ_BAND3_FREQUENCY
#endif
#if defined(AUDIOHW_HAVE_EQ_BAND4) && \
(AUDIOHW_EQ_FREQUENCY_CAPS & (EQ_CAP << 3))
AUDIOHW_EQ_BAND4_FREQUENCY,
#define AUDIOHW_HAVE_EQ_BAND4_FREQUENCY
#endif
#if defined(AUDIOHW_HAVE_EQ_BAND5) && \
(AUDIOHW_EQ_FREQUENCY_CAPS & (EQ_CAP << 4))
AUDIOHW_EQ_BAND5_FREQUENCY,
#define AUDIOHW_HAVE_EQ_BAND5_FREQUENCY
#endif
AUDIOHW_EQ_FREQUENCY_NUM, /* Keep last */
};
#endif /* AUDIOHW_EQ_FREQUENCY_CAPS */
#ifdef AUDIOHW_EQ_WIDTH_CAPS
/* One or more bands supports bandwidth adjustment */
#define AUDIOHW_HAVE_EQ_WIDTH
enum
{
#if defined(AUDIOHW_HAVE_EQ_BAND1) && \
(AUDIOHW_EQ_WIDTH_CAPS & (EQ_CAP << 1))
AUDIOHW_EQ_BAND2_WIDTH,
#define AUDIOHW_HAVE_EQ_BAND2_WIDTH
#endif
#if defined(AUDIOHW_HAVE_EQ_BAND2) && \
(AUDIOHW_EQ_WIDTH_CAPS & (EQ_CAP << 2))
AUDIOHW_EQ_BAND3_WIDTH,
#define AUDIOHW_HAVE_EQ_BAND3_WIDTH
#endif
#if defined(AUDIOHW_HAVE_EQ_BAND3) && \
(AUDIOHW_EQ_WIDTH_CAPS & (EQ_CAP << 3))
AUDIOHW_EQ_BAND4_WIDTH,
#define AUDIOHW_HAVE_EQ_BAND4_WIDTH
#endif
AUDIOHW_EQ_WIDTH_NUM, /* Keep last */
};
#endif /* AUDIOHW_EQ_WIDTH_CAPS */
/* Types and number of settings types (gain, frequency, width) */
enum AUDIOHW_EQ_SETTINGS
{
AUDIOHW_EQ_GAIN,
#ifdef AUDIOHW_HAVE_EQ_FREQUENCY
AUDIOHW_EQ_FREQUENCY,
#endif
#ifdef AUDIOHW_HAVE_EQ_WIDTH
AUDIOHW_EQ_WIDTH,
#endif
AUDIOHW_EQ_SETTING_NUM
};
#endif /* (AUDIOHW_CAPS & EQ_CAP) */
#if (AUDIOHW_CAPS & DEPTH_3D_CAP)
#define AUDIOHW_HAVE_DEPTH_3D
#endif
#if (AUDIOHW_CAPS & LINEOUT_CAP)
#define AUDIOHW_HAVE_LINEOUT
#endif
#if (AUDIOHW_CAPS & MONO_VOL_CAP)
#define AUDIOHW_HAVE_MONO_VOLUME
#endif
#ifdef HAVE_RECORDING
#if (AUDIOHW_CAPS & LIN_GAIN_CAP)
#define AUDIOHW_HAVE_LIN_GAIN
#endif
#if (AUDIOHW_CAPS & MIC_GAIN_CAP)
#define AUDIOHW_HAVE_MIC_GAIN
#endif
#endif /* HAVE_RECORDING */
#if (AUDIOHW_CAPS & FILTER_ROLL_OFF_CAP)
#define AUDIOHW_HAVE_FILTER_ROLL_OFF
#endif
#endif /* AUDIOHW_CAPS */
#ifdef HAVE_SW_TONE_CONTROLS
/* Needed for proper sound support */
#define AUDIOHW_HAVE_BASS
#define AUDIOHW_HAVE_TREBLE
#endif /* HAVE_SW_TONE_CONTROLS */
/* Generate enumeration of SOUND_xxx constants */
#include "audiohw_settings.h"
/* All usable functions implemented by a audio codec drivers. Most of
* the function in sound settings are only called, when in audio codecs
* .h file suitable defines are added.
*/
/**
* Initialize audio codec to a well defined state. Includes SoC-specific
* setup.
*/
void audiohw_init(void);
/**
* Do initial audio codec setup. Usually called from audiohw_init.
*/
void audiohw_preinit(void);
/**
* Do some stuff (codec related) after audiohw_init that needs to be
* delayed such as enabling outputs to prevent popping. This lets
* other inits in the system complete in the meantime.
*/
void audiohw_postinit(void);
/**
* Close audio codec.
*/
void audiohw_close(void);
#ifdef AUDIOHW_HAVE_MONO_VOLUME
/**
* Set new volume value
* @param val to set.
* NOTE: AUDIOHW_CAPS need to contain
* CLIPPING_CAP
*/
void audiohw_set_volume(int val);
#else /* Stereo volume */
/**
* Set new voluem value for each channel
* @param vol_l sets left channel volume
* @param vol_r sets right channel volume
*/
void audiohw_set_volume(int vol_l, int vol_r);
#endif /* AUDIOHW_HAVE_MONO_VOLUME */
#ifdef AUDIOHW_HAVE_LINEOUT
/**
* Set new voluem value for each channel
* @param vol_l sets left channel volume
* @param vol_r sets right channel volume
*/
void audiohw_set_lineout_volume(int vol_l, int vol_r);
#endif
#ifndef AUDIOHW_HAVE_CLIPPING
#if defined(AUDIOHW_HAVE_BASS) || defined(AUDIOHW_HAVE_TREBLE) \
|| defined(AUDIOHW_HAVE_EQ)
/**
* Set new prescaler value.
* @param val to set.
* NOTE: AUDIOHW_CAPS need to contain
* PRESCALER_CAP
*/
void audiohw_set_prescaler(int val);
#endif
#endif /* !AUDIOHW_HAVE_CLIPPING */
#ifdef AUDIOHW_HAVE_BALANCE
/**
* Set new balance value
* @param val to set.
* NOTE: AUDIOHW_CAPS need to contain
* BALANCE_CAP
*/
void audiohw_set_balance(int val);
#endif
#ifdef AUDIOHW_HAVE_TREBLE
/**
* Set new treble value.
* @param val to set.
* NOTE: AUDIOHW_CAPS need to contain
* TREBLE_CAP
*/
void audiohw_set_treble(int val);
#endif
#ifdef AUDIOHW_HAVE_BASS
/**
* Set new bass value.
* @param val to set.
* NOTE: AUDIOHW_CAPS need to contain
* BASS_CAP
*/
void audiohw_set_bass(int val);
#endif
#ifdef AUDIOHW_HAVE_BASS_CUTOFF
/**
* Set new bass cut off value.
* @param val to set.
* NOTE: AUDIOHW_CAPS need to contain
* BASS_CUTOFF_CAP
*/
void audiohw_set_bass_cutoff(int val);
#endif
#ifdef AUDIOHW_HAVE_TREBLE_CUTOFF
/**
* Set new treble cut off value.
* @param val to set.
* NOTE: AUDIOHW_CAPS need to contain
* TREBLE_CUTOFF_CAP
*/
void audiohw_set_treble_cutoff(int val);
#endif
#ifdef AUDIOHW_HAVE_EQ
/**
* Set new band gain value.
* @param band index to which val is set
* @param val to set.
* NOTE: AUDIOHW_CAPS need to contain
* EQ_CAP
*
* AUDIOHW_EQ_BAND_CAPS must be defined as a bitmask
* of EQ_CAP each shifted by the zero-based band number
* for each band. Bands 1 to N are indexed 0 to N-1.
*/
void audiohw_set_eq_band_gain(unsigned int band, int val);
#endif
#ifdef AUDIOHW_HAVE_EQ_FREQUENCY
/**
* Set new band cutoff or center frequency value.
* @param band index to which val is set
* @param val to set.
* NOTE: AUDIOHW_CAPS need to contain
* EQ_CAP
*
* AUDIOHW_EQ_FREQUENCY_CAPS must be defined as a bitmask
* of EQ_CAP each shifted by the zero-based band number
* for each band that supports frequency adjustment.
* Bands 1 to N are indexed 0 to N-1.
*/
void audiohw_set_eq_band_frequency(unsigned int band, int val);
#endif
#ifdef AUDIOHW_HAVE_EQ_WIDTH
/**
* Set new band cutoff or center frequency value.
* @param band index to which val is set
* @param val to set.
* NOTE: AUDIOHW_CAPS need to contain
* EQ_CAP
*
* AUDIOHW_EQ_WIDTH_CAPS must be defined as a bitmask
* of EQ_CAP each shifted by the zero-based band number
* for each band that supports width adjustment.
* Bands 1 to N are indexed 0 to N-1.
*/
void audiohw_set_eq_band_width(unsigned int band, int val);
#endif
#ifdef AUDIOHW_HAVE_DEPTH_3D
/**
* Set new 3-d enhancement (stereo expansion) effect value.
* @param val to set.
* NOTE: AUDIOHW_CAPS need to contain
* DEPTH_3D_CAP
*/
void audiohw_set_depth_3d(int val);
#endif
#ifdef AUDIOHW_HAVE_FILTER_ROLL_OFF
/**
* Set DAC's oversampling filter roll-off.
* @param val 0 - sharp roll-off, 1 - slow roll-off.
* NOTE: AUDIOHW_CAPS need to contain
* FILTER_ROLL_OFF_CAP
*/
void audiohw_set_filter_roll_off(int val);
#endif
void audiohw_set_frequency(int fsel);
#ifdef HAVE_RECORDING
/**
* Enable recording.
* @param source_mic if this is true, we want to record from microphone,
* else we want to record FM/LineIn.
*/
void audiohw_enable_recording(bool source_mic);
/**
* Disable recording.
*/
void audiohw_disable_recording(void);
/**
* Set gain of recording source.
* @param left gain value.
* @param right will not be used if recording from micophone (mono).
* @param type AUDIO_GAIN_MIC, AUDIO_GAIN_LINEIN.
*/
void audiohw_set_recvol(int left, int right, int type);
#endif /* HAVE_RECORDING */
#if defined(HAVE_RECORDING) || defined(HAVE_FMRADIO_IN)
/**
* Enable or disable recording monitor.
* @param enable true or false.
*/
void audiohw_set_monitor(bool enable);
#endif
/**
* Set channel configuration.
* @param val new channel value (see enum below).
*/
enum AUDIOHW_CHANNEL_CONFIG
{
SOUND_CHAN_STEREO,
SOUND_CHAN_MONO,
SOUND_CHAN_CUSTOM,
SOUND_CHAN_MONO_LEFT,
SOUND_CHAN_MONO_RIGHT,
SOUND_CHAN_KARAOKE,
SOUND_CHAN_NUM_MODES,
};
void audiohw_set_channel(int val);
#ifdef HAVE_PITCHCONTROL
/**
* Set the pitch ratio
* @param ratio to set in .01% units
*/
void audiohw_set_pitch(int32_t val);
/**
* Return the set pitch ratio
*/
int32_t audiohw_get_pitch(void);
#endif /* HAVE_PITCHCONTROL */
/**
* Set stereo width.
* @param val new stereo width value.
*/
void audiohw_set_stereo_width(int val);
#ifdef HAVE_SPEAKER
void audiohw_enable_speaker(bool on);
#endif /* HAVE_SPEAKER */
/**
* Some setting are the same for every codec and can be defined here.
*/
#ifdef HAVE_SW_TONE_CONTROLS
AUDIOHW_SETTING(BASS, "dB", 0, 1, -24, 24, 0)
AUDIOHW_SETTING(TREBLE, "dB", 0, 1, -24, 24, 0)
#endif /* HAVE_SW_TONE_CONTROLS */
AUDIOHW_SETTING(BALANCE, "%", 0, 1, -100, 100, 0)
AUDIOHW_SETTING(CHANNELS, "", 0, 1, 0, 5, 0)
AUDIOHW_SETTING(STEREO_WIDTH, "%", 0, 5, 0, 250, 100)
#endif /* _AUDIOHW_H_ */