Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/s5l8700/crt0.S
Michael Sparmann 04ea85fb88 Revert accidental changes from r24723 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24724 a1c6a512-1295-4272-9138-f99709370657
2010-02-17 16:12:21 +00:00

529 lines
14 KiB
ArmAsm
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id: crt0.S 18776 2008-10-11 18:32:17Z gevaerts $
*
* Copyright (C) 2008 by Marcoen Hirschberg
* Copyright (C) 2008 by Denes Balatoni
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
/* Meizu M3 SDRAM settings */
#ifdef MEIZU_M3
#define SDR_DSS_SEL_B 1
#define SDR_DSS_SEL_O 1
#define SDR_DSS_SEL_C 1
#define SDR_TIMING 0x6A491D
#define SDR_CONFIG 0x900
#define SDR_MRS 0x37
#define SDR_EMRS 0x4000
#endif
/* Meizu M6SP SDRAM settings */
#ifdef MEIZU_M6SP
#define SDR_DSS_SEL_B 5
#define SDR_DSS_SEL_O 2
#define SDR_DSS_SEL_C 2
#define SDR_TIMING 0x6A4965
#define SDR_CONFIG 0x700
#define SDR_MRS 0x33
#define SDR_EMRS 0x4033
#endif
.section .intvect,"ax",%progbits
.global start
.global _newstart
/* Exception vectors */
start:
#if CONFIG_CPU==S5L8701 && defined(BOOTLOADER)
b newstart2
#else
b _newstart
#endif
ldr pc, =undef_instr_handler
ldr pc, =software_int_handler
ldr pc, =prefetch_abort_handler
ldr pc, =data_abort_handler
ldr pc, =reserved_handler
ldr pc, =irq_handler
ldr pc, =fiq_handler
#if CONFIG_CPU==S5L8700
.word 0x43554644 /* DFUC */
#endif
.ltorg
_newstart:
ldr pc, =newstart2 // we do not want to execute from 0x0 as iram will be mapped there
.section .init.text,"ax",%progbits
newstart2:
msr cpsr_c, #0xd3 /* enter supervisor mode, disable IRQ/FIQ */
#ifdef ROCKBOX_BIG_ENDIAN
mov r1, #0x80
mrc 15, 0, r0, c1, c0, 0
orr r0, r0, r1
mcr 15, 0, r0, c1, c0, 0 // set bigendian
#endif
ldr r1, =0x3c800000 // disable watchdog
mov r0, #0xa5
str r0, [r1]
mov r0, #0
mov r1, #0x39c00000
str r0, [r1,#0x08] // mask all interrupts
str r0, [r1,#0x20] // mask all external interrupts
mvn r0, #0
str r0, [r1,#0x1c] // clear pending external interrupts
str r0, [r1] // irq priority
str r0, [r1,#0x10] // clear pending interrupts
// ldr r1, =0x3cf00000
// ldr r0, [r1]
// mvn r2, #0x30
// and r0, r0, r2
// mov r2, #0x10
// orr r0, r0, r2
// str r0, [r1]
// ldr r0, [r1,#0x04]
// mov r2, #4
// orr r0, r0, r2
// str r0, [r1,#0x04] // switch backlight on
#if CONFIG_CPU==S5L8701
ldr r1, =0x38200000
ldr r2, [r1]
orr r2, r2, #1
bic r2, r2, #0x10000
str r2, [r1] // remap iram to address 0x0
#ifdef BOOTLOADER
/* Relocate ourself to IRAM - we have been loaded to DRAM */
mov r0, #0x08000000 /* source (DRAM) */
mov r1, #0x22000000 /* dest (IRAM) */
ldr r2, =_dataend
1:
cmp r2, r1
ldrhi r3, [r0], #4
strhi r3, [r1], #4
bhi 1b
ldr pc, =start_loc /* jump to the relocated start_loc: */
start_loc:
#endif /* BOOTLOADER */
#endif /* CONFIG_CPU==S5L8701 */
#if !(CONFIG_CPU==S5L8701 && defined(BOOTLOADER))
ldr r1, =0x3c500000
ldr r0, =0x00800080
str r0, [r1] // CLKCON
mov r0, #0
str r0, [r1,#0x24] // PLLCON
#ifdef IPOD_NANO2G
ldr r0, =0x21200 // pdiv=2, mdiv=0x12 sdiv=0
#else
ldr r0, =0x1ad200 // pdiv=0x1a, mdiv=0xd2 sdiv=0
#endif
str r0, [r1,#0x04] // PLL0PMS
ldr r0, =8100
str r0, [r1,#0x14] // PLL0LCNT
mov r0, #1
str r0, [r1,#0x24] // PLLCON
1:
ldr r0, [r1,#0x20] // PLLLOCK
tst r0, #1
beq 1b
mov r0, #0x280
str r0, [r1,#0x3c] // CLKCON2
ldr r0, =0x20803180 // FCLK_CPU = 200MHz, HCLK = 100MHz, PCLK = 50MHz, other clocks off
str r0, [r1] // CLKCON
ldr r2, =0xc0000078
mrc 15, 0, r0, c1, c0, 0
mvn r1, #0xc0000000
and r0, r0, r1
orr r0, r0, r2
mcr 15, 0, r0, c1, c0, 0 // asynchronous clocking mode
nop
nop
nop
nop
#endif
// ldr r0, =0x10100000
// ldr r1, =0x38200034
// str r0, [r1] // SRAM0/1 data width 16 bit
// ldr r0, =0x00220922
// ldr r7, =0x38200038
// str r0, [r7] // SRAM0/1 clocks
// ldr r0, =0x00220922
// ldr r9, =0x3820003c
// str r0, [r9] // SRAM2/3 clocks
// nop
// nop
// nop
// nop
/* The following two sections of code (i.e. Nano2G and Meizus) should
be unified at some point. */
#ifdef IPOD_NANO2G
ldr r1, =0x3c500000
ldr r0, =0xffdff7ff
str r0, [r1,#0x28] // PWRCON
ldr r0, =0xffffef7e
str r0, [r1,#0x40] // PWRCONEXT
mrc 15, 0, r0, c1, c0, 0
bic r0, r0, #0x1000
bic r0, r0, #0x5
mcr 15, 0, r0, c1, c0, 0 // disable caches and protection unit
mov r1, #0
1:
mov r0, #0
2:
orr r2, r1, r0
mcr 15, 0, r2, c7, c14, 2 // clean and flush dcache single entry
add r0, r0, #0x10
cmp r0, #0x40
bne 2b
add r1, r1, #0x4000000
cmp r1, #0x0
bne 1b
nop
nop
mov r0, #0
mcr 15, 0, r0, c7, c10, 4 // clean and flush whole dcache
mcr 15, 0, r0, c7, c5, 0 // flush icache
mcr 15, 0, r0, c7, c6, 0 // flush dcache
mov r0, #0x3f
mcr 15, 0, r0, c6, c0, 1 // CS0: 4GB at offset 0 - everything
mcr 15, 0, r0, c6, c0, 0 // DS0: 4GB at offset 0 - everything
#ifdef IPOD_NANO2G
mov r0, #0x31 // FIXME: calculate that from MEMORYSIZE
#else
mov r0, #0x2f // FIXME: calculate that from MEMORYSIZE
#endif
mcr 15, 0, r0, c6, c1, 1 // CS1: SRAM/SDRAM mirror
mcr 15, 0, r0, c6, c1, 0 // DS1: SRAM/SDRAM mirror
add r0, r0, #0x08000000
mcr 15, 0, r0, c6, c2, 1 // CS2: SDRAM
mcr 15, 0, r0, c6, c2, 0 // DS2: SDRAM
ldr r0, =0x22000023
mcr 15, 0, r0, c6, c3, 1 // CS3: SRAM
mcr 15, 0, r0, c6, c3, 0 // DS3: SRAM
ldr r0, =0x24000027
mcr 15, 0, r0, c6, c4, 1 // CS4: NOR flash
mcr 15, 0, r0, c6, c4, 0 // DS4: NOR flash
mov r0, #0
mcr 15, 0, r0, c6, c5, 1 // CS5: unused
mcr 15, 0, r0, c6, c5, 0 // DS5: unused
mcr 15, 0, r0, c6, c6, 1 // CS6: unused
mcr 15, 0, r0, c6, c6, 0 // DS6: unused
mcr 15, 0, r0, c6, c7, 1 // CS7: unused
mcr 15, 0, r0, c6, c7, 0 // DS7: unused
mov r0, #0x1e
mcr 15, 0, r0, c2, c0, 1 // CS1-4: cacheable
mcr 15, 0, r0, c2, c0, 0 // DS1-4: cacheable
mcr 15, 0, r0, c3, c0, 0 // DS1-4: write cacheable
ldr r0, =0x000003ff
mcr 15, 0, r0, c5, c0, 1 // CS0-4: full access
mcr 15, 0, r0, c5, c0, 0 // DS0-4: full access
mrc 15, 0, r0, c1, c0, 0
orr r0, r0, #0x5
orr r0, r0, #0x1000
mcr 15, 0, r0, c1, c0, 0 // re-enable protection unit and caches
#else
ldr r1, =0x3c500000
mov r0, #0 // 0x0
str r0, [r1, #40] // enable clock for all peripherals
mov r0, #0 // 0x0
str r0, [r1, #44] // do not enter any power saving mode
#if defined(MEIZU_M6SP) || defined(MEIZU_M3)
/* setup SDRAM for Meizu M6SP */
ldr r1, =0x38200000
// configure SDR drive strength and pad settings
mov r0, #SDR_DSS_SEL_B
str r0, [r1, #0x4C] // MIU_DSS_SEL_B
mov r0, #SDR_DSS_SEL_O
str r0, [r1, #0x50] // MIU_DSS_SEL_O
mov r0, #SDR_DSS_SEL_C
str r0, [r1, #0x54] // MIU_DSS_SEL_C
mov r0, #2
str r0, [r1, #0x60] // SSTL2_PAD_ON
// select SDR mode
ldr r0, [r1, #0x40]
mov r2, #0xFFFDFFFF
and r0, r0, r2
orr r0, r0, #1
str r0, [r1, #0x40] // MIUORG
// set controller configuration
mov r0, #SDR_CONFIG
str r0, [r1] // MIUCON
// set SDRAM timing
ldr r0, =SDR_TIMING
str r0, [r1, #0x10] // MIUSDPARA
// set refresh rate
mov r0, #0x1080
str r0, [r1, #0x08] // MIUAREF
// initialise SDRAM
mov r0, #0x003
str r0, [r1, #0x04] // MIUCOM = nop
ldr r0, =0x203
str r0, [r1, #0x04] // MIUCOM = precharge all banks
nop
nop
nop
ldr r0, =0x303
str r0, [r1, #0x04] // MIUCOM = auto-refresh
nop
nop
nop
nop
str r0, [r1, #0x04] // MIUCOM = auto-refresh
nop
nop
nop
nop
str r0, [r1, #0x04] // MIUCOM = auto-refresh
nop
nop
nop
nop
// set mode register
mov r0, #SDR_MRS
str r0, [r1, #0x0C] // MIUMRS
ldr r0, =0x103
str r0, [r1, #0x04] // MIUCOM = mode register set
ldr r0, =SDR_EMRS
str r0, [r1, #0x0C] // MIUMRS
ldr r0, =0x103
str r0, [r1, #0x04] // MIUCOM = mode register set
#endif /* MEIZU_M6SP */
mov r1, #0x1
mrc 15, 0, r0, c1, c0, 0
bic r0, r0, r1
mcr 15, 0, r0, c1, c0, 0 // disable protection unit
mov r1, #0x4
mrc 15, 0, r0, c1, c0, 0
bic r0, r0, r1
mcr 15, 0, r0, c1, c0, 0 // dcache disable
mov r1, #0x1000
mrc 15, 0, r0, c1, c0, 0
bic r0, r0, r1
mcr 15, 0, r0, c1, c0, 0 // icache disable
mov r1, #0
1:
mov r0, #0
2:
orr r2, r1, r0
mcr 15, 0, r2, c7, c14, 2 // clean and flush dcache single entry
add r0, r0, #0x10
cmp r0, #0x40
bne 2b
add r1, r1, #0x4000000
cmp r1, #0x0
bne 1b
nop
nop
mov r0, #0
mcr 15, 0, r0, c7, c10, 4 // clean and flush whole dcache
mov r0, #0
mcr 15, 0, r0, c7, c5, 0 // flush icache
mov r0, #0
mcr 15, 0, r0, c7, c6, 0 // flush dcache
mov r0, #0x3f
mcr 15, 0, r0, c6, c0, 1
mov r0, #0x2f
mcr 15, 0, r0, c6, c1, 1
ldr r0, =0x08000031
mcr 15, 0, r0, c6, c2, 1
ldr r0, =0x22000023
mcr 15, 0, r0, c6, c3, 1
ldr r0, =0x24000027
mcr 15, 0, r0, c6, c4, 1
mov r0, #0x3f
mcr 15, 0, r0, c6, c0, 0
mov r0, #0x2f
mcr 15, 0, r0, c6, c1, 0
ldr r0, =0x08000031
mcr 15, 0, r0, c6, c2, 0
ldr r0, =0x22000023
mcr 15, 0, r0, c6, c3, 0
ldr r0, =0x24000029
mcr 15, 0, r0, c6, c4, 0
mov r0, #0x1e
mcr 15, 0, r0, c2, c0, 1
mov r0, #0x1e
mcr 15, 0, r0, c2, c0, 0
mov r0, #0x1e
mcr 15, 0, r0, c3, c0, 0
ldr r0, =0x0000ffff
mcr 15, 0, r0, c5, c0, 1
ldr r0, =0x0000ffff
mcr 15, 0, r0, c5, c0, 0 // set up protection and caching
mov r1, #0x4
mrc 15, 0, r0, c1, c0, 0
orr r0, r0, r1
mcr 15, 0, r0, c1, c0, 0 // dcache enable
mov r1, #0x1000
mrc 15, 0, r0, c1, c0, 0
orr r0, r0, r1
mcr 15, 0, r0, c1, c0, 0 // icache enable
mov r1, #0x1
mrc 15, 0, r0, c1, c0, 0
orr r0, r0, r1
mcr 15, 0, r0, c1, c0, 0 // enable protection unit
#endif
#if CONFIG_CPU==S5L8700 || !defined(BOOTLOADER)
/* Copy interrupt vectors to iram */
ldr r2, =_intvectstart
ldr r3, =_intvectend
ldr r4, =_intvectcopy
1:
cmp r3, r2
ldrhi r1, [r4], #4
strhi r1, [r2], #4
bhi 1b
#endif
/* Initialise bss section to zero */
ldr r2, =_edata
ldr r3, =_end
mov r4, #0
1:
cmp r3, r2
strhi r4, [r2], #4
bhi 1b
#if CONFIG_CPU==S5L8700 && defined(BOOTLOADER)
/* Copy icode and data to ram */
ldr r2, =_datastart
ldr r3, =_dataend
ldr r4, =_datacopy
1:
cmp r3, r2
ldrhi r1, [r4], #4
strhi r1, [r2], #4
bhi 1b
#endif
#ifndef BOOTLOADER
/* Copy icode and data to ram */
ldr r2, =_iramstart
ldr r3, =_iramend
ldr r4, =_iramcopy
1:
cmp r3, r2
ldrhi r1, [r4], #4
strhi r1, [r2], #4
bhi 1b
/* Initialise ibss section to zero */
ldr r2, =_iedata
ldr r3, =_iend
mov r4, #0
1:
cmp r3, r2
strhi r4, [r2], #4
bhi 1b
#endif
/* Set up some stack and munge it with 0xdeadbeef */
ldr sp, =stackend
ldr r2, =stackbegin
ldr r3, =0xdeadbeef
1:
cmp sp, r2
strhi r3, [r2], #4
bhi 1b
/* Set up stack for IRQ mode */
msr cpsr_c, #0xd2
ldr sp, =_irqstackend
/* Set up stack for FIQ mode */
msr cpsr_c, #0xd1
ldr sp, =_fiqstackend
/* Let abort and undefined modes use IRQ stack */
msr cpsr_c, #0xd7
ldr sp, =_irqstackend
msr cpsr_c, #0xdb
ldr sp, =_irqstackend
/* Switch back to supervisor mode */
msr cpsr_c, #0xd3
// if we did not switch remap on, device
// would crash when MENU is pressed,
// as that button is connected to BOOT_MODE pin
#if CONFIG_CPU==S5L8700
ldr r1, =0x38200000
ldr r0, [r1]
mvn r2, #0x10000
and r0, r0, r2
mov r2, #0x1
orr r0, r0, r2
str r0, [r1] // remap iram to address 0x0
#endif
bl main
.text
/* .global UIE*/
/* All illegal exceptions call into UIE with exception address as first
* parameter. This is calculated differently depending on which exception
* we're in. Second parameter is exception number, used for a string lookup
* in UIE. */
undef_instr_handler:
sub r0, lr, #4
mov r1, #0
b UIE
/* We run supervisor mode most of the time, and should never see a software
* exception being thrown. Perhaps make it illegal and call UIE? */
software_int_handler:
reserved_handler:
movs pc, lr
prefetch_abort_handler:
sub r0, lr, #4
mov r1, #1
b UIE
data_abort_handler:
sub r0, lr, #8
mov r1, #2
b UIE
Reference in a new issue View git blame Copy permalink