rockbox

History

Mark Arigo 04992ef050 Move the PP5020 ADC defines to the c-file instead of repeating them across the header files. Also, the Tatung TPJ1022 should use the common PP5020 ADC driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19864 a1c6a512-1295-4272-9138-f99709370657		2009-01-27 03:19:57 +00:00
..
common	Moved database builder into a separate directory, and gave it its' own Makefile. Now it compiles cleanly and builds a database if ran in root of music tree.	2008-12-15 23:42:19 +00:00
decompressor	New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.	2008-11-20 11:27:31 +00:00
drivers	Use bus reset detection for all ARC OTG devices. Remove conflict from LV24020LP driver with some GPIO-by-number macros for PP502x. Start monitoring for USB stack once all core threads and queues are created otherwise queues will likely be registered after USB acks. Putting PP502x system_reboot in IRAM (unmapped, uncached) memory seems to help it work more consistently. Hopefully I got all the PP USB connect handlers in the right spot in irq_handler. If device seems unresponsive to cable, check there first.	2009-01-22 22:05:04 +00:00
export	Onda VX747:	2009-01-27 00:38:58 +00:00
include	Removed the sim_ prefix from the plugin api.	2009-01-07 09:53:46 +00:00
target	Move the PP5020 ADC defines to the c-file instead of repeating them across the header files. Also, the Tatung TPJ1022 should use the common PP5020 ADC driver.	2009-01-27 03:19:57 +00:00
test	Added keymaps for ZVM to plugins. Enabled zvm plugin building in tools/configure. FS#9605 by Adam Hogan and Robert Menes.	2008-12-04 21:28:56 +00:00
usbstack	Fix RAM disk when no audio buffer is available	2009-01-21 20:52:35 +00:00
arabjoin.c
arabjoin.h
ata_idle_notify.c	Apply FS#9500. This adds a storage_() abstraction to replace ata_(). To do that, it also introduces sd_, nand_, and mmc_*.	2008-11-01 16:14:28 +00:00
backlight-sw-fading.c	Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S	2009-01-26 23:21:49 +00:00
backlight.c	Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S	2009-01-26 23:21:49 +00:00
bidi.c
buffer.c
COPYING
debug.c
eeprom_settings.c
enc_base.c
events.c
firmware.make	Speed up Player build a bit by not building a useless sysfont.o.	2009-01-02 12:47:11 +00:00
font.c
font_cache.c
general.c	remove align_buffer from firmare/general.c, replacing with ALIGN_BUFFER macro, and replace all uses of it (only resize.c in core, and pictureflow and mpegplayer plugins), remove it from plugin_api,	2009-01-13 13:48:26 +00:00
hangul.c
hotswap.c	cleanup storage defines	2008-10-31 21:25:04 +00:00
ifp_usb_serial.c
kernel.c	Unify kernel list management for ticks, registered queues and timeout objects by using NULL-terminated lists of pointers. Redo timeout API a bit to simplify it and integrate it. Should give some small binsize reduction accross the board but more if timeout objects are being included.	2009-01-21 02:44:20 +00:00
logf.c	Fix (USB) serial logf()	2009-01-01 19:54:30 +00:00
lru.c
mp3_playback.c
panic.c	Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file.	2009-01-08 10:15:32 +00:00
pcm.c	Check that PCM is playing/recording after getting the current position from the hardware layer.	2008-12-14 11:42:47 +00:00
pcm_sampr.c
powermgmt.c	c200v1/e200v1: Add battery charging. This should be usable on v2 players but those should be evaluated for current, endpoint voltage and whether or not accurate battery readings may always be obtained (which determines algorithm setup and behavior).	2009-01-11 10:07:22 +00:00
profile.c
README
rolo.c	Fix Clip firmware building by adding missing symbols	2008-11-10 11:04:43 +00:00
rom.lds
scroll_engine.c
sound.c	Small binsize optimization and likely a tiny speedup too	2009-01-02 11:21:58 +00:00
SOURCES	Move the PP5020 ADC defines to the c-file instead of repeating them across the header files. Also, the Tatung TPJ1022 should use the common PP5020 ADC driver.	2009-01-27 03:19:57 +00:00
system.c	Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file.	2009-01-08 10:15:32 +00:00
thread.c	Enable sleep() on MIPS targets	2008-12-19 23:35:42 +00:00
timer.c	Gigabeat S: Get timer API working. metronome will work now.	2009-01-05 00:00:29 +00:00
tuner.c	Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.	2008-12-27 19:18:50 +00:00
usb.c	Use bus reset detection for all ARC OTG devices. Remove conflict from LV24020LP driver with some GPIO-by-number macros for PP502x. Start monitoring for USB stack once all core threads and queues are created otherwise queues will likely be registered after USB acks. Putting PP502x system_reboot in IRAM (unmapped, uncached) memory seems to help it work more consistently. Hopefully I got all the PP USB connect handlers in the right spot in irq_handler. If device seems unresponsive to cable, check there first.	2009-01-22 22:05:04 +00:00

README

See docs/README