Rafaël Carré 0290094d8a Sansa AMS PCM : replace buggy and confusing one-liner ... The bits which are not divider (i2si/i2so enable and clock selection) would be unset. This is not a problem in the current code since this function was always called before starting playback (and setting those bits) but this might be a problem when recording is enabled. Finally it is simpler to read. Thanks to Fred Bauer for pointing this. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23156 a1c6a512-1295-4272-9138-f99709370657		2009-10-13 16:41:20 +00:00
..
sansa-c200v2	Sansa c200v2: update DBOP button reading mechanism, this enables readout of the volume buttons, rec and hold button.	2009-09-05 18:56:59 +00:00
sansa-clip	Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled	2009-08-15 15:02:51 +00:00
sansa-e200v2	Fix "lcd driver speed up" on e200v2	2009-09-30 18:54:42 +00:00
sansa-fuze	Sansa Fuze/e200v2: protect lcd a little better against concurrent access	2009-09-26 10:47:10 +00:00
sansa-m200v4	Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled	2009-08-15 15:02:51 +00:00
adc-target.h
app.lds
ascodec-as3525.c
ascodec-target.h	FS#10344 - AMSSansa Dynamically adjust core voltage to extend playtime.	2009-06-30 17:56:21 +00:00
ata_sd_as3525.c	AMS Sansa: Remove BUSWIDTH and BLOCKLEN commands and revise strategy for High Speed SD Card.	2009-10-12 18:55:10 +00:00
audio-as3525.c
backlight-e200v2-fuze.c
boot.lds
button-e200v2-fuze.c	Fuze/e200v2: Fix inaccuracy when moving the wheel slowly (fixes FS#10667).	2009-10-09 23:27:38 +00:00
clock-target.h
debug-as3525.c	AMS Sansa: Adjust View HW info page to display SD and uSD MCICLK freqs instead	2009-09-12 20:50:11 +00:00
debug-target.h
dma-pl081.c
dma-target.h
fmradio-i2c-as3525.c	Fix delays in generic i2c driver, reduce delays in ams sansa fmradio i2c driver (tested on m200v4, clip, e200v2, fuze).	2009-06-20 21:45:04 +00:00
i2s-as3525.c
kernel-as3525.c	Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h	2009-06-29 14:30:12 +00:00
lcd-as-e200v2-fuze.S	ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.	2009-07-11 23:43:44 +00:00
pcm-as3525.c	Sansa AMS PCM : replace buggy and confusing one-liner	2009-10-13 16:41:20 +00:00
power-as3525.c
powermgmt-as3525.c
powermgmt-target.h	Enable charging on the Sansa Fuze (charging/discharging curves are still uncalibrated)	2009-06-20 14:29:21 +00:00
system-as3525.c	Sansa AMS: identify interrupts with no source set	2009-08-11 13:20:55 +00:00
system-target.h	ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.	2009-07-05 01:17:25 +00:00
timer-as3525.c	Remove the TIMER_* macros and declare target-specific functions in timer.h	2009-06-29 14:29:57 +00:00
usb-as3525.c
usb-drv-as3525.c	Samsa AMS: start of an USB driver (nothing working atm)	2009-07-06 13:54:51 +00:00