rockbox/firmware/drivers/power.c
Jörg Hohensohn 816234f431 oops, a typo made the player build fail
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@4097 a1c6a512-1295-4272-9138-f99709370657
2003-12-03 18:50:19 +00:00

155 lines
3.1 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Linus Nielsen Feltzing
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "sh7034.h"
#include <stdbool.h>
#include "config.h"
#include "adc.h"
#include "kernel.h"
#include "system.h"
#include "power.h"
#ifdef HAVE_CHARGE_CTRL
bool charger_enabled;
#endif
#ifndef SIMULATOR
void power_init(void)
{
#ifdef HAVE_CHARGE_CTRL
or_b(0x20, &PBIORL); /* Set charging control bit to output */
charger_enable(false); /* Default to charger OFF */
#endif
}
bool charger_inserted(void)
{
#ifdef HAVE_CHARGE_CTRL
/* Recorder */
return adc_read(ADC_EXT_POWER) > 0x100;
#else
#ifdef HAVE_FMADC
/* FM */
return adc_read(ADC_CHARGE_REGULATOR) < 0x1FF;
#else
/* Player */
return (PADR & 1) == 0;
#endif /* HAVE_FMADC */
#endif /* HAVE_CHARGE_CTRL */
}
void charger_enable(bool on)
{
#ifdef HAVE_CHARGE_CTRL
if(on)
{
and_b(~0x20, &PBDRL);
charger_enabled = 1;
}
else
{
or_b(0x20, &PBDRL);
charger_enabled = 0;
}
#else
on = on;
#endif
}
void ide_power_enable(bool on)
{
(void)on;
bool touched = false;
#ifdef NEEDS_ATA_POWER_ON
if(on)
{
or_b(0x20, &PADRL);
touched = true;
}
#endif
#ifdef HAVE_ATA_POWER_OFF
if(!on)
{
and_b(~0x20, &PADRL);
touched = true;
}
#endif
/* late port preparation, else problems with read/modify/write
of other bits on same port, while input and floating high */
if (touched)
{
or_b(0x20, &PAIORL); /* PA5 is an output */
PACR2 &= 0xFBFF; /* GPIO for PA5 */
}
}
bool ide_powered(void)
{
#if defined(NEEDS_ATA_POWER_ON) || defined(HAVE_ATA_POWER_OFF)
if ((PACR2 & 0x0400) || !(PAIOR & 0x0020)) /* not configured for output */
return true; /* would be floating high, disk on */
else
return (PADR & 0x0020) != 0;
#else
return true; /* pretend always powered if not controlable */
#endif
}
void power_off(void)
{
set_irq_level(15);
#ifdef HAVE_POWEROFF_ON_PBDR
and_b(~0x10, &PBDRL);
or_b(0x10, &PBIORL);
#elif defined(HAVE_POWEROFF_ON_PB5)
and_b(~0x20, &PBDRL);
or_b(0x20, &PBIORL);
#else
and_b(~0x08, &PADRH);
or_b(0x08, &PAIORH);
#endif
while(1);
}
#else
bool charger_inserted(void)
{
return false;
}
void charger_enable(bool on)
{
on = on;
}
void power_off(void)
{
}
void ide_power_enable(bool on)
{
on = on;
}
#endif /* SIMULATOR */