/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2002 by Linus Nielsen Feltzing * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "cpu.h" .section .init.text,"ax",%progbits .global start start: /* Exception vectors */ b newstart b undef_instr_handler b software_int_handler b prefetch_abort_handler b data_abort_handler b reserved_handler b irq_handler b fiq_handler .balign 0x40, 0x6B /* Arm bootloader and startup code based on startup.s from the iPodLinux loader * * Copyright (c) 2003, Daniel Palffy (dpalffy (at) rainstorm.org) * Copyright (c) 2005, Bernard Leach * */ /* Initially this code is running at VA 0x8a000000 (PA 0x82000000). * The mapping stub is copied to IRAM (0x1fffc000) and jumps to the final * VA remapping starting at 0x01f00000 because the 1MB section containing * the framebuffer at PA 0x81000000 is skipped in the remapping giving 63MB * of contiguous RAM for the firmware. The TTB is placed at the end of said * section. * * For now this will be done in bootloader, especially if usb will be needed * within the bootloader to load the main firmware file. Interrupts will be * needed for this (whether they be swi or irq). */ newstart: msr cpsr_c, #0xd3 /* enter supervisor mode, disable IRQ/FIQ */ #ifdef BOOTLOADER adr r2, remap_start /* Load PC-relative labels */ adr r3, remap_end ldr r5, =TTB_BASE_ADDR /* TTB pointer */ ldr r6, =IRAM_BASE_ADDR mov r1, r6 1: /* Copy remapping stub to IRAM */ cmp r3, r2 ldrhi r4, [r2], #4 strhi r4, [r1], #4 bhi 1b mov pc, r6 /* Remapping stub. No absolute addresses may be used until after the * remapping is complete. */ remap_start: mrc p15, 0, r3, c1, c0, 0 /* perform writeback if D cache is enabled */ tst r3, #(1 << 2) /* dcache? */ tsteq r3, #(1 << 12) /* or icache? */ mcrne p15, 0, r0, c7, c10, 0 /* clean dcache */ mov r0, #0 mcrne p15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */ mcr p15, 0, r0, c8, c7, 0 /* invalidate TLBs */ mcr p15, 0, r0, c7, c10, 4 /* Drain the write buffer */ mcr p15, 0, r0, c13, c0, 0 mcr p15, 0, r0, c13, c0, 1 /* Also setup the Peripheral Port Remap register inside the core */ mov r0, #0x40000000 /* start from AIPS 2GB region */ add r0, r0, #0x15 mcr p15, 0, r0, c15, c2, 4 /*** L2 Cache setup/invalidation/disable ***/ /* Disable L2 cache first */ mov r0, #L2CC_BASE_ADDR mov r1, #0 str r1, [r0, #L2_CACHE_CTL_REG] /* Disble L1 caches and memory manager */ bic r3, r3, #(1 << 12) /* L1 I-cache disabled */ bic r3, r3, #((1 << 2) | /* L1 D-cache disabled */ \ (1 << 0)) /* MMU disabled */ mcr p15, 0, r3, c1, c0, 0 /* * Configure L2 Cache: * - 128k size(16k way) * - 8-way associativity * - 0 ws TAG/VALID/DIRTY * - 4 ws DATA R/W */ mov r1, #0x00130000 orr r1, r1, #0x24 str r1, [r0, #L2_CACHE_AUX_CTL_REG] /* Invalidate L2 */ mov r1, #0x000000FF str r1, [r0, #L2_CACHE_INV_WAY_REG] 1: /* Poll Invalidate By Way register */ ldr r1, [r0, #L2_CACHE_INV_WAY_REG] cmp r1, #0 bne 1b /*** End of L2 operations ***/ /* TTB Initialisation */ mov r2, r5 add r3, r5, #TTB_SIZE mov r1, #0 1: str r1, [r2], #4 cmp r2, r3 blo 1b /* Set TTB base address */ mcr p15, 0, r5, c2, c0, 0 /* Set all domains to manager status */ mvn r0, #0 mcr p15, 0, r0, c3, c0, 0 /* Set page tables */ /* Map each memory loc to itself, no cache */ /* Physical address = 0x0 */ mov r1, #(1 << 10) /* superuser - r/w, user - no access */ orr r1, r1, #((0 << 5) | /* domain 0th */ \ (1 << 4) | /* should be "1" */ \ (1 << 1)) /* Section signature */ mov r2, r5 add r3, r5, #TTB_SIZE /* End position */ 1: str r1, [r2], #4 add r1, r1, #(1 << 20) /* Next MB */ cmp r2, r3 blo 1b sub r1, r1, #TTB_SIZE/4*(1 << 20) /* Back up */ /* Map 0x80000000 -> 0x0, cached */ mov r2, r5 /* TTB pointer */ add r3, r5, #63*4 /* End position */ orr r1, r1, #0x80000000 /* Physical address */ orr r1, r1, #((1 << 3) | /* cache flag */ \ (1 << 2)) /* buffer flag */ 1: str r1, [r2], #4 add r1, r1, #(1 << 20) and r4, r1, #0x0ff00000 cmp r4, #0x00100000 /* Skip framebuffer */ addeq r1, r1, #(1 << 20) cmp r2, r3 blo 1b /* Enable MMU */ mov r0, #0 mcr p15, 0, r0, c8, c7, 0 /* Invalidate TLB */ mcr p15, 0, r0, c7, c7, 0 /* Invalidate icache and dcache */ /* Auxilliary control register */ mrc p15, 0, r0, c1, c0, 1 bic r0, r0, #((1 << 6) | /* Restrict cache size OFF */ \ (1 << 5) | /* Enable block tranfer cache operations */ \ (1 << 4) | /* Clean+Invalidate cache operation ON */ \ (1 << 3)) /* Round-robin micro TLB replacement */ orr r0, r0, #((1 << 2) | /* Static branch prediction ON */ \ (1 << 1) | /* Dynamic branch prediction ON */ \ (1 << 0)) /* Return stack enabled */ mcr p15, 0, r0, c1, c0, 1 /* Control register */ mrc p15, 0, r0, c1, c0, 0 bic r0, r0, #((1 << 29) | /* AF by AP disabled */ \ (1 << 28) | /* TEX remap disabled */ \ (1 << 24) | /* Vectored interrupt OFF */ \ (1 << 23) | /* Sub AP bits enabled (compatible) */ \ (1 << 22)) /* Unaligned access support disabled */ bic r0, r0, #((1 << 21) | /* All performance features enabled */ \ (1 << 15)) /* Loads to PC set T bit */ bic r0, r0, #((1 << 13)) /* Low vectors */ orr r0, r0, #((1 << 14) | /* Round-robin replacement for I/D caches */ \ (1 << 12) | /* L1 I-cache enabled */ \ (1 << 11) | /* Program flow prediction enabled */ \ (1 << 9) | /* ROM protection enabled */ \ (1 << 8)) /* MMU protection enabled */ orr r0, r0, #((1 << 2) | /* L1 D-cache enabled */ \ (1 << 1) | /* Strict alignment enabled */ \ (1 << 0)) /* MMU enabled */ mcr p15, 0, r0, c1, c0, 0 nop nop nop nop ldr pc, L_post_remap L_post_remap: .word remap_end remap_end: #endif /* BOOTLOADER */ #ifdef BOOTLOADER /* Copy bootloader exception handler code to address 0 */ ldr r2, =_vectorsstart ldr r3, =_vectorsend ldr r4, =_vectorscopy 1: cmp r3, r2 ldrhi r5, [r4], #4 strhi r5, [r2], #4 bhi 1b #else /* Zero out IBSS */ ldr r2, =_iedata ldr r3, =_iend mov r4, #0 1: cmp r3, r2 strhi r4, [r2], #4 bhi 1b /* Copy the IRAM */ ldr r2, =_iramcopy ldr r3, =_iramstart ldr r4, =_iramend 1: cmp r4, r3 ldrhi r5, [r2], #4 strhi r5, [r3], #4 bhi 1b #endif /* BOOTLOADER */ /* Initialise bss section to zero */ ldr r2, =_edata ldr r3, =_end mov r4, #0 1: cmp r3, r2 strhi r4, [r2], #4 bhi 1b /* Initialise the device bss section to zero */ ldr r2, =_devbssdata ldr r3, =_devbssend mov r4, #0 1: cmp r3, r2 strhi r4, [r2], #4 bhi 1b /* Set up some stack and munge it with 0xdeadbeef */ ldr sp, =stackend ldr r2, =stackbegin ldr r3, =0xdeadbeef 1: cmp sp, r2 strhi r3, [r2], #4 bhi 1b /* Set up stack for IRQ mode */ msr cpsr_c, #0xd2 ldr sp, =irq_stack /* Set up stack for FIQ mode */ msr cpsr_c, #0xd1 ldr sp, =fiq_stack /* Let abort and undefined modes use IRQ stack */ msr cpsr_c, #0xd7 ldr sp, =irq_stack msr cpsr_c, #0xdb ldr sp, =irq_stack /* Switch back to supervisor mode */ msr cpsr_c, #0xd3 bl main #ifdef BOOTLOADER /* Exception vectors with absolute jumps for bootloader */ .section .vectors,"aw" ldr pc, [pc, #24] ldr pc, [pc, #24] ldr pc, [pc, #24] ldr pc, [pc, #24] ldr pc, [pc, #24] ldr pc, [pc, #24] ldr pc, [pc, #24] ldr pc, [pc, #24] .word newstart .word undef_instr_handler .word software_int_handler .word prefetch_abort_handler .word data_abort_handler .word reserved_handler .word irq_handler .word fiq_handler #endif /* BOOTLOADER */ .text .global UIE /* All illegal exceptions call into UIE with exception address as first * parameter. This is calculated differently depending on which exception * we're in. Second parameter is exception number, used for a string lookup * in UIE. */ undef_instr_handler: mov r0, lr mov r1, #0 b UIE /* We run supervisor mode most of the time, and should never see a software * exception being thrown. Perhaps make it illegal and call UIE? */ software_int_handler: reserved_handler: movs pc, lr prefetch_abort_handler: sub r0, lr, #4 mov r1, #1 b UIE data_abort_handler: sub r0, lr, #8 mov r1, #2 b UIE /* 256 words of IRQ stack */ .space 256*4 irq_stack: /* 256 words of FIQ stack */ .space 256*4 fiq_stack: