/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2011 by Amaury Pouly * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #ifndef POWERMGMT_TARGET_H #define POWERMGMT_TARGET_H #include "config.h" /* Fuze+ OF settings: * - current ramp slope: 50 mA/s * - conditioning threshold voltage: 3 V * - conditioning max voltage: 3.1 V * - conditioning current: 60 mA * - conditioning timeout: 1 h * - charging voltage: 4.2 V * - charging current: 200 mA * - charging threshold current: 30 mA * - charging timeout: 4 h * - top off period: 30 min * - high die temperature: 71 °C * - low die temperature: 56 °C * - safe die temperature current: 30 mA * - battery temperature channel: 0 * - high battery temperature: 1100 * - low battery temperature: 220 * - safe battery temperature current: 0 mA * - low DCDC battery voltage: 3.9 V */ #define IMX233_CHARGE_CURRENT 200 #define IMX233_STOP_CURRENT 30 #define IMX233_TOPOFF_TIMEOUT (30 * 60 * HZ) #define IMX233_CHARGING_TIMEOUT (4 * 3600 * HZ) #define IMX233_DIE_TEMP_HIGH 71 #define IMX233_DIE_TEMP_LOW 56 #define IMX233_BATT_TEMP_SENSOR 0 #define IMX233_BATT_TEMP_HIGH 1100 #define IMX233_BATT_TEMP_LOW 220 #endif /* POWERMGMT_TARGET_H */