/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * * Copyright (C) 2013 Lorenzo Miori * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include #include "kernel.h" #include "powermgmt.h" #include "power.h" #include "file.h" #include "adc.h" #include "radio-ypr.h" #include "pmu-ypr1.h" #include "ioctl-ypr1.h" #include "stdio.h" #include "unistd.h" #include "fcntl.h" #include "system.h" #define MAX17040_VCELL 0x02 #define MAX17040_SOC 0x04 #define MAX17040_MODE 0x06 #define MAX17040_VERSION 0x08 #define MAX17040_RCOMP 0x0C #define MAX17040_COMMAND 0xFE static int max17040_dev = -1; void max17040_init(void) { max17040_dev = open("/dev/r1Batt", O_RDONLY); if (max17040_dev < 0) printf("/dev/r1Batt open error!"); } void max17040_close(void) { if (max17040_dev >= 0) close(max17040_dev); } #if (CONFIG_BATTERY_MEASURE & VOLTAGE_MEASURE) == VOLTAGE_MEASURE const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] = { 3470 }; /* the OF shuts down at this voltage */ const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] = { 3450 }; /* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */ const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] = { { 3450, 3502, 3550, 3587, 3623, 3669, 3742, 3836, 3926, 4026, 4200 } }; #endif #if CONFIG_CHARGING /* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */ const unsigned short const percent_to_volt_charge[11] = { 3450, 3670, 3721, 3751, 3782, 3821, 3876, 3941, 4034, 4125, 4200 }; unsigned int power_input_status(void) { unsigned status = POWER_INPUT_NONE; if (pmu_ioctl(MAX8819_IOCTL_IS_EXT_PWR, NULL) > 0) status = POWER_INPUT_MAIN_CHARGER; return status; } #endif /* CONFIG_CHARGING */ /* Returns battery voltage from MAX17040 VCELL ADC [millivolts steps], * adc returns voltage in 1.25mV steps */ /* * TODO this would be interesting to be mixed with battery percentage, for information * and completition purpouses */ #if (CONFIG_BATTERY_MEASURE & VOLTAGE_MEASURE) == VOLTAGE_MEASURE int _battery_voltage(void) { int level = 4000; max17040_request ret = { .addr = 2, .reg1 = 0, .reg2 = 0 }; if (ioctl(max17040_dev, MAX17040_READ_REG, &ret) >= 0) { int step = (ret.reg1 << 4) | (ret.reg2 >> 4); level = step + (step >> 2); } return level; } #elif (CONFIG_BATTERY_MEASURE & PERCENTAGE_MEASURE) == PERCENTAGE_MEASURE int _battery_level(void) { int level = 100; max17040_request ret = { .addr = 4, .reg1 = 0, .reg2 = 0 }; if (ioctl(max17040_dev, MAX17040_READ_REG, &ret) >= 0) level = MIN(ret.reg1, 100); return level; } #endif bool charging_state(void) { int ret = pmu_ioctl(MAX8819_IOCTL_GET_CHG_STATUS, NULL); if (ret == PMU_FULLY_CHARGED) return true; return false; } #if CONFIG_TUNER static bool tuner_on = false; bool tuner_power(bool status) { if (status != tuner_on) { tuner_on = status; status = !status; if (tuner_on) radiodev_open(); else radiodev_close(); } return status; } bool tuner_powered(void) { return tuner_on; } #endif /* #if CONFIG_TUNER */