/* * This config file is for the Apple iPod Nano */ #define TARGET_TREE /* this target is using the target tree system */ #define IPOD_ARCH 1 #define MODEL_NAME "Apple iPod Nano 1g" /* For Rolo and boot loader */ #define MODEL_NUMBER 4 /* define this if you use an ATA controller */ #define CONFIG_STORAGE STORAGE_ATA /*define this if the ATA controller and method of USB access support LBA48 */ #define HAVE_LBA48 /* define this if you have recording possibility */ #define HAVE_RECORDING /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO) /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_44) /* define the bitmask of recording sample rates */ #define REC_SAMPR_CAPS (SAMPR_CAP_44) /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you have access to the pitchscreen */ #define HAVE_PITCHSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* LCD dimensions */ #define LCD_WIDTH 176 #define LCD_HEIGHT 132 #define LCD_DEPTH 16 /* 65536 colours */ #define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */ /* LCD stays visible without backlight - simulator hint */ #define HAVE_TRANSFLECTIVE_LCD #define CONFIG_KEYPAD IPOD_4G_PAD /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_PCF50605 /* Define if the device can wake from an RTC alarm */ #define HAVE_RTC_ALARM /* Define this if you can switch on/off the accessory power supply */ #define HAVE_ACCESSORY_SUPPLY /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 /* Define this if you have the WM8975 audio codec */ #define HAVE_WM8975 #define AB_REPEAT_ENABLE 1 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS /* We can fade the backlight by using PWM */ #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 1 #define MAX_BRIGHTNESS_SETTING 32 #define DEFAULT_BRIGHTNESS_SETTING 16 /* define this if the unit uses a scrollwheel for navigation */ #define HAVE_SCROLLWHEEL /* define to activate advanced wheel acceleration code */ #define HAVE_WHEEL_ACCELERATION /* define from which rotation speed [degree/sec] on the acceleration starts */ #define WHEEL_ACCEL_START 270 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */ #define WHEEL_ACCELERATION 3 /* Define this if you can detect headphones */ #define HAVE_HEADPHONE_DETECTION /* define this if you have a flash memory storage */ #define HAVE_FLASH_STORAGE #define BATTERY_CAPACITY_DEFAULT 300 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 200 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 600 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 20 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ /* Hardware controlled charging with monitoring */ #define CONFIG_CHARGING CHARGING_MONITOR /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER #define CURRENT_NORMAL 32 /* MP3: ~9h playback out of 300mAh battery */ #define CURRENT_BACKLIGHT 20 /* FIXME: this needs adjusting */ #if defined(HAVE_RECORDING) #define CURRENT_RECORD 35 /* FIXME: this needs adjusting */ #endif /* Define Apple remote tuner */ #define CONFIG_TUNER IPOD_REMOTE_TUNER #define HAVE_RDS_CAP /* Define this if you have a PortalPlayer PP5022 */ #define CONFIG_CPU PP5022 /* Define this if you want to use the PP5020 i2c interface */ #define CONFIG_I2C I2C_PP5020 /* define this if the hardware can be powered off while charging */ //#define HAVE_POWEROFF_WHILE_CHARGING /* The start address index for ROM builds */ #define ROM_START 0x00000000 /* The size of the flash ROM */ #define FLASH_SIZE 0x100000 /* Define this to the CPU frequency */ #define CPU_FREQ 24000000 #define CONFIG_LCD LCD_IPODNANO /* Offset ( in the firmware file's header ) to the file length */ #define FIRMWARE_OFFSET_FILE_LENGTH 0 /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_ARC /* enable these for the experimental usb stack */ #define HAVE_USBSTACK #define USE_ROCKBOX_USB #define USB_VENDOR_ID 0x05ac #define USB_PRODUCT_ID 0x120a #define HAVE_USB_HID_MOUSE /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ /* Define this if you can read an absolute wheel position */ #define HAVE_WHEEL_POSITION #define BOOTFILE_EXT "ipod" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define ICODE_ATTR_TREMOR_NOT_MDCT #define IPOD_ACCESSORY_PROTOCOL #define HAVE_SERIAL /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ #define HAVE_ATA_DMA /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY