/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2002 by Linus Nielsen Feltzing * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include #include "cpu.h" #include "kernel.h" #include "thread.h" #include "i2c.h" #include "debug.h" #include "rtc.h" #include "usb.h" #include "power.h" #include "system.h" #include "timer.h" #include "backlight.h" #ifdef HAVE_BACKLIGHT_BRIGHTNESS #include "pcf50606.h" /* iRiver brightness */ #endif #if (CONFIG_BACKLIGHT == BL_IRIVER_H300) || (CONFIG_BACKLIGHT == BL_IPOD3G) #include "lcd.h" /* for lcd_enable() */ #endif #ifdef HAVE_REMOTE_LCD #include "lcd-remote.h" #endif #if defined(CONFIG_BACKLIGHT) && !defined(BOOTLOADER) const char backlight_timeout_value[19] = { -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 45, 60, 90 }; #define BACKLIGHT_ON 1 #define BACKLIGHT_OFF 2 #define REMOTE_BACKLIGHT_ON 3 #define REMOTE_BACKLIGHT_OFF 4 #define BACKLIGHT_UNBOOST_CPU 5 static void backlight_thread(void); static long backlight_stack[DEFAULT_STACK_SIZE/sizeof(long)]; static const char backlight_thread_name[] = "backlight"; static struct event_queue backlight_queue; static int backlight_timer; static int backlight_timeout = 5*HZ; #ifdef HAVE_CHARGING static int backlight_timeout_plugged = 5*HZ; #endif #ifdef HAVE_REMOTE_LCD static int remote_backlight_timer; static int remote_backlight_timeout = 5*HZ; #ifdef HAVE_CHARGING static int remote_backlight_timeout_plugged = 5*HZ; #endif #endif #if (CONFIG_BACKLIGHT == BL_IRIVER_H100) && !defined(SIMULATOR) /* backlight fading */ #define BL_PWM_INTERVAL 5000 /* Cycle interval in µs */ #define BL_PWM_COUNT 100 static const char backlight_fade_value[8] = { 0, 1, 2, 4, 6, 8, 10, 20 }; static int fade_in_count = 1; static int fade_out_count = 4; static bool bl_timer_active = false; static int bl_dim_current = BL_PWM_COUNT; static int bl_dim_target = BL_PWM_COUNT; static int bl_pwm_counter = 0; static volatile int bl_cycle_counter = 0; static enum {DIM_STATE_START, DIM_STATE_MAIN} bl_dim_state = DIM_STATE_START; static void backlight_isr(void) { int timer_period; bool idle = false; timer_period = CPU_FREQ / 1000 * BL_PWM_INTERVAL / 1000; switch (bl_dim_state) { /* New cycle */ case DIM_STATE_START: bl_pwm_counter = 0; bl_cycle_counter++; if (bl_dim_current > 0 && bl_dim_current < BL_PWM_COUNT) { and_l(~0x00020000, &GPIO1_OUT); bl_pwm_counter = bl_dim_current; timer_period = timer_period * bl_pwm_counter / BL_PWM_COUNT; bl_dim_state = DIM_STATE_MAIN; } else { if (bl_dim_current) and_l(~0x00020000, &GPIO1_OUT); else or_l(0x00020000, &GPIO1_OUT); if (bl_dim_current == bl_dim_target) idle = true; } break ; /* Dim main screen */ case DIM_STATE_MAIN: or_l(0x00020000, &GPIO1_OUT); bl_dim_state = DIM_STATE_START; timer_period = timer_period * (BL_PWM_COUNT - bl_pwm_counter) / BL_PWM_COUNT; break ; } if ((bl_dim_target > bl_dim_current) && (bl_cycle_counter >= fade_in_count)) { bl_dim_current++; bl_cycle_counter = 0; } if ((bl_dim_target < bl_dim_current) && (bl_cycle_counter >= fade_out_count)) { bl_dim_current--; bl_cycle_counter = 0; } if (idle) { queue_post(&backlight_queue, BACKLIGHT_UNBOOST_CPU, NULL); timer_unregister(); bl_timer_active = false; } else timer_set_period(timer_period); } static void backlight_switch(void) { if (bl_dim_target > (BL_PWM_COUNT/2)) { and_l(~0x00020000, &GPIO1_OUT); bl_dim_current = BL_PWM_COUNT; } else { or_l(0x00020000, &GPIO1_OUT); bl_dim_current = 0; } } static void backlight_release_timer(void) { cpu_boost(false); timer_unregister(); bl_timer_active = false; backlight_switch(); } static void backlight_dim(int value) { /* protect from extraneous calls with the same target value */ if (value == bl_dim_target) return; bl_dim_target = value; if (bl_timer_active) return ; if (timer_register(0, backlight_release_timer, 1, 0, backlight_isr)) { /* Prevent cpu frequency changes while dimming. */ cpu_boost(true); bl_timer_active = true; } else backlight_switch(); } void backlight_set_fade_in(int index) { fade_in_count = backlight_fade_value[index]; } void backlight_set_fade_out(int index) { fade_out_count = backlight_fade_value[index]; } #endif /* (CONFIG_BACKLIGHT == BL_IRIVER_H100) && !defined(SIMULATOR) */ static void __backlight_on(void) { #ifdef SIMULATOR sim_backlight(100); #elif CONFIG_BACKLIGHT == BL_IRIVER_H100 if (fade_in_count > 0) backlight_dim(BL_PWM_COUNT); else { bl_dim_target = bl_dim_current = BL_PWM_COUNT; and_l(~0x00020000, &GPIO1_OUT); } #elif CONFIG_BACKLIGHT == BL_IRIVER_H300 lcd_enable(true); or_l(0x00020000, &GPIO1_OUT); #elif CONFIG_BACKLIGHT == BL_RTC /* Enable square wave */ rtc_write(0x0a, rtc_read(0x0a) | 0x40); #elif CONFIG_BACKLIGHT == BL_PA14_LO /* Player */ and_b(~0x40, &PADRH); /* drive and set low */ or_b(0x40, &PAIORH); #elif CONFIG_BACKLIGHT == BL_PA14_HI /* Ondio */ or_b(0x40, &PADRH); /* drive it high */ #elif CONFIG_BACKLIGHT == BL_GMINI P1 |= 0x10; #elif CONFIG_BACKLIGHT == BL_IPOD4G /* brightness full */ outl(0x80000000 | (0xff << 16), 0x7000a010); /* set port b bit 3 on */ outl(((0x100 | 1) << 3), 0x6000d824); #elif CONFIG_BACKLIGHT==BL_IPODMINI /* set port B03 on */ outl(((0x100 | 1) << 3), 0x6000d824); #elif CONFIG_BACKLIGHT==BL_IPODNANO /* set port B03 on */ outl(((0x100 | 1) << 3), 0x6000d824); /* set port L07 on */ outl(((0x100 | 1) << 7), 0x6000d12c); #elif CONFIG_BACKLIGHT==BL_IPOD3G lcd_enable(true); #elif CONFIG_BACKLIGHT==BL_IRIVER_IFP7XX GPIO3_SET = 1; #endif } static void __backlight_off(void) { #ifdef SIMULATOR sim_backlight(0); #elif CONFIG_BACKLIGHT == BL_IRIVER_H100 if (fade_out_count > 0) backlight_dim(0); else { bl_dim_target = bl_dim_current = 0; or_l(0x00020000, &GPIO1_OUT); } #elif CONFIG_BACKLIGHT == BL_IRIVER_H300 and_l(~0x00020000, &GPIO1_OUT); lcd_enable(false); #elif CONFIG_BACKLIGHT == BL_RTC /* Disable square wave */ rtc_write(0x0a, rtc_read(0x0a) & ~0x40); #elif CONFIG_BACKLIGHT == BL_PA14_LO /* Player */ and_b(~0x40, &PAIORH); /* let it float (up) */ #elif CONFIG_BACKLIGHT == BL_PA14_HI /* Ondio */ and_b(~0x40, &PADRH); /* drive it low */ #elif CONFIG_BACKLIGHT == BL_GMINI P1 &= ~0x10; #elif CONFIG_BACKLIGHT == BL_IPOD4G /* fades backlight off on 4g */ outl(inl(0x70000084) & ~0x2000000, 0x70000084); outl(0x80000000, 0x7000a010); #elif CONFIG_BACKLIGHT==BL_IPODNANO /* set port B03 off */ outl(((0x100 | 0) << 3), 0x6000d824); /* set port L07 off */ outl(((0x100 | 0) << 7), 0x6000d12c); #elif CONFIG_BACKLIGHT==BL_IRIVER_IFP7XX GPIO3_CLR = 1; #elif CONFIG_BACKLIGHT==BL_IPOD3G lcd_enable(false); #elif CONFIG_BACKLIGHT==BL_IPODMINI /* set port B03 off */ outl(((0x100 | 0) << 3), 0x6000d824); #endif } #ifdef HAVE_REMOTE_LCD static void __remote_backlight_on(void) { #ifdef SIMULATOR sim_remote_backlight(100); #elif defined(IRIVER_H300_SERIES) and_l(~0x00000002, &GPIO1_OUT); #else and_l(~0x00000800, &GPIO_OUT); #endif } static void __remote_backlight_off(void) { #ifdef SIMULATOR sim_remote_backlight(0); #elif defined(IRIVER_H300_SERIES) or_l(0x00000002, &GPIO1_OUT); #else or_l(0x00000800, &GPIO_OUT); #endif } #endif /* HAVE_REMOTE_LCD */ void backlight_thread(void) { struct event ev; while(1) { queue_wait(&backlight_queue, &ev); switch(ev.id) { #ifdef HAVE_REMOTE_LCD case REMOTE_BACKLIGHT_ON: #ifdef HAVE_CHARGING if (charger_inserted() #ifdef HAVE_USB_POWER || usb_powered() #endif ) remote_backlight_timer = remote_backlight_timeout_plugged; else #endif remote_backlight_timer = remote_backlight_timeout; /* Backlight == OFF in the setting? */ if (remote_backlight_timer < 0) { remote_backlight_timer = 0; /* Disable the timeout */ __remote_backlight_off(); } else { __remote_backlight_on(); } break; case REMOTE_BACKLIGHT_OFF: __remote_backlight_off(); break; #endif /* HAVE_REMOTE_LCD */ case BACKLIGHT_ON: #ifdef HAVE_CHARGING if (charger_inserted() #ifdef HAVE_USB_POWER || usb_powered() #endif ) backlight_timer = backlight_timeout_plugged; else #endif backlight_timer = backlight_timeout; if (backlight_timer < 0) /* Backlight == OFF in the setting? */ { backlight_timer = 0; /* Disable the timeout */ __backlight_off(); } else { __backlight_on(); } break; case BACKLIGHT_OFF: __backlight_off(); break; #if (CONFIG_BACKLIGHT == BL_IRIVER_H100) && !defined(SIMULATOR) case BACKLIGHT_UNBOOST_CPU: cpu_boost(false); break; #endif case SYS_USB_CONNECTED: /* Tell the USB thread that we are safe */ DEBUGF("backlight_thread got SYS_USB_CONNECTED\n"); usb_acknowledge(SYS_USB_CONNECTED_ACK); break; case SYS_USB_DISCONNECTED: usb_acknowledge(SYS_USB_DISCONNECTED_ACK); break; } } } static void backlight_tick(void) { #ifdef HAVE_CHARGING static bool charger_was_inserted = false; bool charger_is_inserted = charger_inserted() #ifdef HAVE_USB_POWER || usb_powered() #endif ; if( charger_was_inserted != charger_is_inserted ) { backlight_on(); #ifdef HAVE_REMOTE_LCD remote_backlight_on(); #endif } charger_was_inserted = charger_is_inserted; #endif /* HAVE_CHARGING */ if(backlight_timer) { backlight_timer--; if(backlight_timer == 0) { backlight_off(); } } #ifdef HAVE_REMOTE_LCD if(remote_backlight_timer) { remote_backlight_timer--; if(remote_backlight_timer == 0) { remote_backlight_off(); } } #endif } void backlight_init(void) { queue_init(&backlight_queue); create_thread(backlight_thread, backlight_stack, sizeof(backlight_stack), backlight_thread_name); tick_add_task(backlight_tick); #ifdef SIMULATOR /* do nothing */ #elif CONFIG_BACKLIGHT == BL_IRIVER_H100 or_l(0x00020000, &GPIO1_ENABLE); or_l(0x00020000, &GPIO1_FUNCTION); and_l(~0x00020000, &GPIO1_OUT); /* Start with the backlight ON */ #elif CONFIG_BACKLIGHT == BL_IRIVER_H300 or_l(0x00020000, &GPIO1_ENABLE); or_l(0x00020000, &GPIO1_FUNCTION); or_l(0x00020000, &GPIO1_OUT); /* Start with the backlight ON */ #elif CONFIG_BACKLIGHT == BL_PA14_LO || CONFIG_BACKLIGHT == BL_PA14_HI PACR1 &= ~0x3000; /* Set PA14 (backlight control) to GPIO */ or_b(0x40, &PAIORH); /* ..and output */ #elif CONFIG_BACKLIGHT == BL_GMINI P1CON |= 0x10; /* P1.4 C-MOS output mode */ #endif backlight_on(); #ifdef HAVE_REMOTE_LCD remote_backlight_on(); #endif } void backlight_on(void) { queue_post(&backlight_queue, BACKLIGHT_ON, NULL); } void backlight_off(void) { queue_post(&backlight_queue, BACKLIGHT_OFF, NULL); } /* return value in ticks; 0 means always on, <0 means always off */ int backlight_get_current_timeout(void) { #ifdef HAVE_CHARGING if (charger_inserted() #ifdef HAVE_USB_POWER || usb_powered() #endif ) return backlight_timeout_plugged; else return backlight_timeout; #else return backlight_timeout; #endif } void backlight_set_timeout(int index) { if((unsigned)index >= sizeof(backlight_timeout_value)) /* if given a weird value, use 0 */ index=0; backlight_timeout = HZ * backlight_timeout_value[index]; backlight_on(); } #ifdef HAVE_CHARGING void backlight_set_timeout_plugged(int index) { if((unsigned)index >= sizeof(backlight_timeout_value)) /* if given a weird value, use 0 */ index=0; backlight_timeout_plugged = HZ * backlight_timeout_value[index]; backlight_on(); } #endif #ifdef HAVE_REMOTE_LCD void remote_backlight_on(void) { queue_post(&backlight_queue, REMOTE_BACKLIGHT_ON, NULL); } void remote_backlight_off(void) { queue_post(&backlight_queue, REMOTE_BACKLIGHT_OFF, NULL); } void remote_backlight_set_timeout(int index) { if((unsigned)index >= sizeof(backlight_timeout_value)) /* if given a weird value, use 0 */ index=0; remote_backlight_timeout = HZ * backlight_timeout_value[index]; remote_backlight_on(); } #ifdef HAVE_CHARGING void remote_backlight_set_timeout_plugged(int index) { if((unsigned)index >= sizeof(backlight_timeout_value)) /* if given a weird value, use 0 */ index=0; remote_backlight_timeout_plugged = HZ * backlight_timeout_value[index]; remote_backlight_on(); } #endif #endif /* HAVE_REMOTE_LCD */ #else /* no backlight, empty dummy functions */ #if defined(BOOTLOADER) && defined(CONFIG_BACKLIGHT) void backlight_init(void) { #ifdef IRIVER_H300_SERIES or_l(0x00020000, &GPIO1_OUT); or_l(0x00020000, &GPIO1_ENABLE); or_l(0x00020000, &GPIO1_FUNCTION); #endif } #endif void backlight_on(void) {} void backlight_off(void) {} void backlight_set_timeout(int index) {(void)index;} #ifdef HAVE_REMOTE_LCD void remote_backlight_on(void) {} void remote_backlight_off(void) {} void remote_backlight_set_timeout(int index) {(void)index;} #endif #endif /* #ifdef CONFIG_BACKLIGHT */ #ifdef HAVE_BACKLIGHT_BRIGHTNESS #ifdef IRIVER_H300_SERIES void backlight_set_brightness(int val) { /* set H300 brightness by changing the PWM accepts 0..15 but note that 0 and 1 give a black display! */ val &= 0x0F; if(val