/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2008 by Marcoen Hirschberg, Bart van Adrichem * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include #define REG8_PTR_T volatile uint8_t * #define REG16_PTR_T volatile uint16_t * #define REG32_PTR_T volatile uint32_t * #define TIMER_FREQ 47923200L /* 04. CALMADM2E */ /* Following registers are mapped on IO Area in data memory area of Calm. */ #define CONFIG0 (*(REG16_PTR_T)(0x3F000000)) /* configuration/control register 0 */ #define CONFIG1 (*(REG16_PTR_T)(0x3F000002)) /* configuration/control register 1*/ #define COMMUN (*(REG16_PTR_T)(0x3F000004)) /* Communication Control Register */ #define DDATA0 (*(REG16_PTR_T)(0x3F000006)) /* Communication data from host to ADM */ #define DDATA1 (*(REG16_PTR_T)(0x3F000008)) /* Communication data from host to ADM */ #define DDATA2 (*(REG16_PTR_T)(0x3F00000A)) /* Communication data from host to ADM */ #define DDATA3 (*(REG16_PTR_T)(0x3F00000C)) /* Communication data from host to ADM */ #define DDATA4 (*(REG16_PTR_T)(0x3F00000E)) /* Communication data from host to ADM */ #define DDATA5 (*(REG16_PTR_T)(0x3F000010)) /* Communication data from host to ADM */ #define DDATA6 (*(REG16_PTR_T)(0x3F000012)) /* Communication data from host to ADM */ #define DDATA7 (*(REG16_PTR_T)(0x3F000014)) /* Communication data from host to ADM */ #define UDATA0 (*(REG16_PTR_T)(0x3F000016)) /* Communication data from ADM to host */ #define UDATA1 (*(REG16_PTR_T)(0x3F000018)) /* Communication data from ADM to host */ #define UDATA2 (*(REG16_PTR_T)(0x3F00001A)) /* Communication data from ADM to host */ #define UDATA3 (*(REG16_PTR_T)(0x3F00001C)) /* Communication data from ADM to host */ #define UDATA4 (*(REG16_PTR_T)(0x3F00001E)) /* Communication data from ADM to host */ #define UDATA5 (*(REG16_PTR_T)(0x3F000020)) /* Communication data from ADM to host */ #define UDATA6 (*(REG16_PTR_T)(0x3F000022)) /* Communication data from ADM to host */ #define UDATA7 (*(REG16_PTR_T)(0x3F000024)) /* Communication data from ADM to host */ #define IBASE_H (*(REG16_PTR_T)(0x3F000026)) /* Higher half of start address for ADM instruction area */ #define IBASE_L (*(REG16_PTR_T)(0x3F000028)) /* Lower half of start address for ADM instruction area */ #define DBASE_H (*(REG16_PTR_T)(0x3F00002A)) /* Higher half of start address for CalmRISC data area */ #define DBASE_L (*(REG16_PTR_T)(0x3F00002C)) /* Lower half of start address for CalmRISC data area */ #define XBASE_H (*(REG16_PTR_T)(0x3F00002E)) /* Higher half of start address for Mac X area */ #define XBASE_L (*(REG16_PTR_T)(0x3F000030)) /* Lower half of start address for Mac X area */ #define YBASE_H (*(REG16_PTR_T)(0x3F000032)) /* Higher half of start address for Mac Y area */ #define YBASE_L (*(REG16_PTR_T)(0x3F000034)) /* Lower half of start address for Mac Y area */ #define S0BASE_H (*(REG16_PTR_T)(0x3F000036)) /* Higher half of start address for sequential buffer 0 area */ #define S0BASE_L (*(REG16_PTR_T)(0x3F000038)) /* Lower half of start address for sequential buffer 0 area */ #define S1BASE_H (*(REG16_PTR_T)(0x3F00003A)) /* Higher half of start address for sequential buffer 1 area */ #define S1BASE_L (*(REG16_PTR_T)(0x3F00003C)) /* Lower half of start address for sequential buffer 1 area */ #define CACHECON (*(REG16_PTR_T)(0x3F00003E)) /* Cache Control Register */ #define CACHESTAT (*(REG16_PTR_T)(0x3F000040)) /* Cache status register */ #define SBFCON (*(REG16_PTR_T)(0x3F000042)) /* Sequential Buffer Control Register */ #define SBFSTAT (*(REG16_PTR_T)(0x3F000044)) /* Sequential Buffer Status Register */ #define SBL0OFF_H (*(REG16_PTR_T)(0x3F000046)) /* Higher bits of Offset register of sequential block 0 area */ #define SBL0OFF_L (*(REG16_PTR_T)(0x3F000048)) /* Lower bits of Offset register of sequential block 0 area */ #define SBL1OFF_H (*(REG16_PTR_T)(0x3F00004A)) /* Higher bits of Offset register of sequential block 1 area */ #define SBL1OFF_L (*(REG16_PTR_T)(0x3F00004C)) /* Lower bits of Offset register of sequential block 1 area */ #define SBL0BEGIN_H (*(REG16_PTR_T)(0x3F00004E)) /* Higher bits of Begin Offset of sequential block 0 area in ring mode */ #define SBL0BEGIN_L (*(REG16_PTR_T)(0x3F000050)) /* Lower bits of Begin Offset of sequential block 0 area in ring mode */ #define SBL1BEGIN_H (*(REG16_PTR_T)(0x3F000052)) /* Higher bits of Begin Offset of sequential block 1 area in ring mode */ #define SBL1BEGIN_L (*(REG16_PTR_T)(0x3F000054)) /* Lower bits of Begin Offset of sequential block 1 area in ring mode */ #define SBL0END_H (*(REG16_PTR_T)(0x3F000056)) /* Lower bits of End Offset of sequential block 0 area in ring mode */ #define SBL0END_L (*(REG16_PTR_T)(0x3F000058)) /* Higher bits of End Offset of sequential block 0 area in ring mode */ #define SBL1END_H (*(REG16_PTR_T)(0x3F00005A)) /* Lower bits of End Offset of sequential block 1 area in ring mode */ #define SBL1END_L (*(REG16_PTR_T)(0x3F00005C)) /* Higher bits of End Offset of sequential block 1 area in ring mode */ /* Following registers are components of SFRS of the target system */ #define ADM_CONFIG (*(REG32_PTR_T)(0x39000000)) /* Configuration/Control Register */ #define ADM_COMMUN (*(REG32_PTR_T)(0x39000004)) /* Communication Control Register */ #define ADM_DDATA0 (*(REG32_PTR_T)(0x39000010)) /* Communication data from host to ADM */ #define ADM_DDATA1 (*(REG32_PTR_T)(0x39000014)) /* Communication data from host to ADM */ #define ADM_DDATA2 (*(REG32_PTR_T)(0x39000018)) /* Communication data from host to ADM */ #define ADM_DDATA3 (*(REG32_PTR_T)(0x3900001C)) /* Communication data from host to ADM */ #define ADM_DDATA4 (*(REG32_PTR_T)(0x39000020)) /* Communication data from host to ADM */ #define ADM_DDATA5 (*(REG32_PTR_T)(0x39000024)) /* Communication data from host to ADM */ #define ADM_DDATA6 (*(REG32_PTR_T)(0x39000028)) /* Communication data from host to ADM */ #define ADM_DDATA7 (*(REG32_PTR_T)(0x3900002C)) /* Communication data from host to ADM */ #define ADM_UDATA0 (*(REG32_PTR_T)(0x39000030)) /* Communication data from ADM to host */ #define ADM_UDATA1 (*(REG32_PTR_T)(0x39000034)) /* Communication data from ADM to host */ #define ADM_UDATA2 (*(REG32_PTR_T)(0x39000038)) /* Communication data from ADM to host */ #define ADM_UDATA3 (*(REG32_PTR_T)(0x3900003C)) /* Communication data from ADM to host */ #define ADM_UDATA4 (*(REG32_PTR_T)(0x39000040)) /* Communication data from ADM to host */ #define ADM_UDATA5 (*(REG32_PTR_T)(0x39000044)) /* Communication data from ADM to host */ #define ADM_UDATA6 (*(REG32_PTR_T)(0x39000048)) /* Communication data from ADM to host */ #define ADM_UDATA7 (*(REG32_PTR_T)(0x3900004C)) /* Communication data from ADM to host */ #define ADM_IBASE (*(REG32_PTR_T)(0x39000050)) /* Start Address for ADM Instruction Area */ #define ADM_DBASE (*(REG32_PTR_T)(0x39000054)) /* Start Address for CalmRISC Data Area */ #define ADM_XBASE (*(REG32_PTR_T)(0x39000058)) /* Start Address for Mac X Area */ #define ADM_YBASE (*(REG32_PTR_T)(0x3900005C)) /* Start Address for Mac Y Area */ #define ADM_S0BASE (*(REG32_PTR_T)(0x39000060)) /* Start Address for Sequential Block 0 Area */ #define ADM_S1BASE (*(REG32_PTR_T)(0x39000064)) /* Start Address for Sequential Block 1 Area */ /* 05. CLOCK & POWER MANAGEMENT */ #define CLKCON (*(REG32_PTR_T)(0x3C500000)) /* Clock control Register */ #define PLL0PMS (*(REG32_PTR_T)(0x3C500004)) /* PLL PMS value Register */ #define PLL1PMS (*(REG32_PTR_T)(0x3C500008)) /* PLL PMS value Register */ #define PLL2PMS (*(REG32_PTR_T)(0x3C50000C)) /* PLL PMS value Register - S5L8701 only? */ #define PLL0LCNT (*(REG32_PTR_T)(0x3C500014)) /* PLL0 lock count register */ #define PLL1LCNT (*(REG32_PTR_T)(0x3C500018)) /* PLL1 lock count register */ #define PLL2LCNT (*(REG32_PTR_T)(0x3C50001C)) /* PLL2 lock count register - S5L8701 only? */ #define PLLLOCK (*(REG32_PTR_T)(0x3C500020)) /* PLL lock status register */ #define PLLCON (*(REG32_PTR_T)(0x3C500024)) /* PLL control register */ #define PWRCON (*(REG32_PTR_T)(0x3C500028)) /* Clock power control register */ #define PWRMODE (*(REG32_PTR_T)(0x3C50002C)) /* Power mode control register */ #define SWRCON (*(REG32_PTR_T)(0x3C500030)) /* Software reset control register */ #define RSTSR (*(REG32_PTR_T)(0x3C500034)) /* Reset status register */ #define DSPCLKMD (*(REG32_PTR_T)(0x3C500038)) /* DSP clock mode register */ #define CLKCON2 (*(REG32_PTR_T)(0x3C50003C)) /* clock control register 2 */ #define PWRCONEXT (*(REG32_PTR_T)(0x3C500040)) /* 06. INTERRUPT CONTROLLER UNIT */ #define SRCPND (*(REG32_PTR_T)(0x39C00000)) /* Indicates the interrupt request status. */ #define INTMOD (*(REG32_PTR_T)(0x39C00004)) /* Interrupt mode register. */ #define INTMSK (*(REG32_PTR_T)(0x39C00008)) /* Determines which interrupt source is masked. The */ #if CONFIG_CPU==S5L8701 #define INTMSK_TIMERA (1<<5) #define INTMSK_TIMERB (1<<5) #define INTMSK_TIMERC (1<<5) #define INTMSK_TIMERD (1<<5) #define INTMSK_ECC (1<<19) #define INTMSK_USB_OTG (1<<16) #else #define INTMSK_TIMERA (1<<5) #define INTMSK_TIMERB (1<<7) #define INTMSK_TIMERC (1<<8) #define INTMSK_TIMERD (1<<9) #endif #define PRIORITY (*(REG32_PTR_T)(0x39C0000C)) /* IRQ priority control register */ #define INTPND (*(REG32_PTR_T)(0x39C00010)) /* Indicates the interrupt request status. */ #define INTOFFSET (*(REG32_PTR_T)(0x39C00014)) /* Indicates the IRQ interrupt request source */ #define EINTPOL (*(REG32_PTR_T)(0x39C00018)) /* Indicates external interrupt polarity */ #define EINTPEND (*(REG32_PTR_T)(0x39C0001C)) /* Indicates whether external interrupts are pending. */ #define EINTMSK (*(REG32_PTR_T)(0x39C00020)) /* Indicates whether external interrupts are masked */ /* 07. MEMORY INTERFACE UNIT (MIU) */ /* SDRAM */ #define MIUCON (*(REG32_PTR_T)(0x38200000)) /* External Memory configuration register */ #define MIUCOM (*(REG32_PTR_T)(0x38200004)) /* Command and status register */ #define MIUAREF (*(REG32_PTR_T)(0x38200008)) /* Auto-refresh control register */ #define MIUMRS (*(REG32_PTR_T)(0x3820000C)) /* SDRAM Mode Register Set Value Register */ #define MIUSDPARA (*(REG32_PTR_T)(0x38200010)) /* SDRAM parameter register */ /* DDR */ #define MEMCONF (*(REG32_PTR_T)(0x38200020)) /* External Memory configuration register */ #define USRCMD (*(REG32_PTR_T)(0x38200024)) /* Command and Status register */ #define AREF (*(REG32_PTR_T)(0x38200028)) /* Auto-refresh control register */ #define MRS (*(REG32_PTR_T)(0x3820002C)) /* DRAM mode register set value register */ #define DPARAM (*(REG32_PTR_T)(0x38200030)) /* DRAM parameter register (Unit of ‘tXXX’ : tCK */ #define SMEMCONF (*(REG32_PTR_T)(0x38200034)) /* Static memory mode register set value register */ #define MIUS01PARA (*(REG32_PTR_T)(0x38200038)) /* SRAM0, SRAM1 static memory parameter register (In S5L8700, SRAM0 is Nor Flash) */ #define MIUS23PARA (*(REG32_PTR_T)(0x3820003C)) /* SRAM2 and SRAM3 static memory parameter register */ #define MIUORG (*(REG32_PTR_T)(0x38200040)) /* SDR/DDR selection */ #define MIUDLYDQS (*(REG32_PTR_T)(0x38200044)) /* DQS/DQS-rst delay parameter */ #define MIUDLYCLK (*(REG32_PTR_T)(0x38200048)) /* SDR/DDR Clock delay parameter */ #define MIU_DSS_SEL_B (*(REG32_PTR_T)(0x3820004C)) /* SSTL2 Drive Strength parameter for Bi-direction signal */ #define MIU_DSS_SEL_O (*(REG32_PTR_T)(0x38200050)) /* SSTL2 Drive Strength parameter for Output signal */ #define MIU_DSS_SEL_C (*(REG32_PTR_T)(0x38200054)) /* SSTL2 Drive Strength parameter for Clock signal */ #define PAD_DSS_SEL_NOR (*(REG32_PTR_T)(0x38200058)) /* Wide range I/O Drive Strength parameter for NOR interface */ #define PAD_DSS_SEL_ATA (*(REG32_PTR_T)(0x3820005C)) /* Wide range I/O Drive Strength parameter for ATA interface */ #define SSTL2_PAD_ON (*(REG32_PTR_T)(0x38200060)) /* SSTL2 pad ON/OFF select */ /* 08. IODMA CONTROLLER */ #define DMABASE0 (*(REG32_PTR_T)(0x38400000)) /* Base address register for channel 0 */ #define DMACON0 (*(REG32_PTR_T)(0x38400004)) /* Configuration register for channel 0 */ #define DMATCNT0 (*(REG32_PTR_T)(0x38400008)) /* Transfer count register for channel 0 */ #define DMACADDR0 (*(REG32_PTR_T)(0x3840000C)) /* Current memory address register for channel 0 */ #define DMACTCNT0 (*(REG32_PTR_T)(0x38400010)) /* Current transfer count register for channel 0 */ #define DMACOM0 (*(REG32_PTR_T)(0x38400014)) /* Channel 0 command register */ #define DMANOFF0 (*(REG32_PTR_T)(0x38400018)) /* Channel 0 offset2 register */ #define DMABASE1 (*(REG32_PTR_T)(0x38400020)) /* Base address register for channel 1 */ #define DMACON1 (*(REG32_PTR_T)(0x38400024)) /* Configuration register for channel 1 */ #define DMATCNT1 (*(REG32_PTR_T)(0x38400028)) /* Transfer count register for channel 1 */ #define DMACADDR1 (*(REG32_PTR_T)(0x3840002C)) /* Current memory address register for channel 1 */ #define DMACTCNT1 (*(REG32_PTR_T)(0x38400030)) /* Current transfer count register for channel 1 */ #define DMACOM1 (*(REG32_PTR_T)(0x38400034)) /* Channel 1 command register */ #define DMABASE2 (*(REG32_PTR_T)(0x38400040)) /* Base address register for channel 2 */ #define DMACON2 (*(REG32_PTR_T)(0x38400044)) /* Configuration register for channel 2 */ #define DMATCNT2 (*(REG32_PTR_T)(0x38400048)) /* Transfer count register for channel 2 */ #define DMACADDR2 (*(REG32_PTR_T)(0x3840004C)) /* Current memory address register for channel 2 */ #define DMACTCNT2 (*(REG32_PTR_T)(0x38400050)) /* Current transfer count register for channel 2 */ #define DMACOM2 (*(REG32_PTR_T)(0x38400054)) /* Channel 2 command register */ #define DMABASE3 (*(REG32_PTR_T)(0x38400060)) /* Base address register for channel 3 */ #define DMACON3 (*(REG32_PTR_T)(0x38400064)) /* Configuration register for channel 3 */ #define DMATCNT3 (*(REG32_PTR_T)(0x38400068)) /* Transfer count register for channel 3 */ #define DMACADDR3 (*(REG32_PTR_T)(0x3840006C)) /* Current memory address register for channel 3 */ #define DMACTCNT3 (*(REG32_PTR_T)(0x38400070)) /* Current transfer count register for channel 3 */ #define DMACOM3 (*(REG32_PTR_T)(0x38400074)) /* Channel 3 command register */ #if CONFIG_CPU==S5L8701 #define DMABASE4 (*(REG32_PTR_T)(0x38400080)) /* Base address register for channel 4 */ #define DMACON4 (*(REG32_PTR_T)(0x38400084)) /* Configuration register for channel 4 */ #define DMATCNT4 (*(REG32_PTR_T)(0x38400088)) /* Transfer count register for channel 4 */ #define DMACADDR4 (*(REG32_PTR_T)(0x3840008C)) /* Current memory address register for channel 4 */ #define DMACTCNT4 (*(REG32_PTR_T)(0x38400090)) /* Current transfer count register for channel 4 */ #define DMACOM4 (*(REG32_PTR_T)(0x38400094)) /* Channel 4 command register */ #define DMABASE5 (*(REG32_PTR_T)(0x384000A0)) /* Base address register for channel 5 */ #define DMACON5 (*(REG32_PTR_T)(0x384000A4)) /* Configuration register for channel 5 */ #define DMATCNT5 (*(REG32_PTR_T)(0x384000A8)) /* Transfer count register for channel 5 */ #define DMACADDR5 (*(REG32_PTR_T)(0x384000AC)) /* Current memory address register for channel 5 */ #define DMACTCNT5 (*(REG32_PTR_T)(0x384000B0)) /* Current transfer count register for channel 5 */ #define DMACOM5 (*(REG32_PTR_T)(0x384000B4)) /* Channel 5 command register */ #define DMABASE6 (*(REG32_PTR_T)(0x384000C0)) /* Base address register for channel 6 */ #define DMACON6 (*(REG32_PTR_T)(0x384000C4)) /* Configuration register for channel 6 */ #define DMATCNT6 (*(REG32_PTR_T)(0x384000C8)) /* Transfer count register for channel 6 */ #define DMACADDR6 (*(REG32_PTR_T)(0x384000CC)) /* Current memory address register for channel 6 */ #define DMACTCNT6 (*(REG32_PTR_T)(0x384000D0)) /* Current transfer count register for channel 6 */ #define DMACOM6 (*(REG32_PTR_T)(0x384000D4)) /* Channel 6 command register */ #define DMABASE7 (*(REG32_PTR_T)(0x384000E0)) /* Base address register for channel 7 */ #define DMACON7 (*(REG32_PTR_T)(0x384000E4)) /* Configuration register for channel 7 */ #define DMATCNT7 (*(REG32_PTR_T)(0x384000E8)) /* Transfer count register for channel 7 */ #define DMACADDR7 (*(REG32_PTR_T)(0x384000EC)) /* Current memory address register for channel 7 */ #define DMACTCNT7 (*(REG32_PTR_T)(0x384000F0)) /* Current transfer count register for channel 7 */ #define DMACOM7 (*(REG32_PTR_T)(0x384000F4)) /* Channel 7 command register */ #define DMABASE8 (*(REG32_PTR_T)(0x38400100)) /* Base address register for channel 8 */ #define DMACON8 (*(REG32_PTR_T)(0x38400104)) /* Configuration register for channel 8 */ #define DMATCNT8 (*(REG32_PTR_T)(0x38400108)) /* Transfer count register for channel 8 */ #define DMACADDR8 (*(REG32_PTR_T)(0x3840010C)) /* Current memory address register for channel 8 */ #define DMACTCNT8 (*(REG32_PTR_T)(0x38400110)) /* Current transfer count register for channel 8 */ #define DMACOM8 (*(REG32_PTR_T)(0x38400114)) /* Channel 8 command register */ #define DMAALLST (*(REG32_PTR_T)(0x38400180)) /* All channel status register */ #else #define DMAALLST (*(REG32_PTR_T)(0x38400100)) /* All channel status register */ #endif #define DMACON_DEVICE_SHIFT 30 #define DMACON_DIRECTION_SHIFT 29 #define DMACON_DATA_SIZE_SHIFT 22 #define DMACON_BURST_LEN_SHIFT 19 #define DMACOM_START 4 #define DMACOM_CLEARBOTHDONE 7 #define DMAALLST_WCOM0 (1 << 0) #define DMAALLST_HCOM0 (1 << 1) #define DMAALLST_DMABUSY0 (1 << 2) #define DMAALLST_HOLD_SKIP (1 << 3) #define DMAALLST_WCOM1 (1 << 4) #define DMAALLST_HCOM1 (1 << 5) #define DMAALLST_DMABUSY1 (1 << 6) #define DMAALLST_WCOM2 (1 << 8) #define DMAALLST_HCOM2 (1 << 9) #define DMAALLST_DMABUSY2 (1 << 10) #define DMAALLST_WCOM3 (1 << 12) #define DMAALLST_HCOM3 (1 << 13) #define DMAALLST_DMABUSY3 (1 << 14) #define DMAALLST_CHAN0_MASK (0xF << 0) #define DMAALLST_CHAN1_MASK (0xF << 4) #define DMAALLST_CHAN2_MASK (0xF << 8) #define DMAALLST_CHAN3_MASK (0xF << 12) /* 10. REAL TIMER CLOCK (RTC) */ #define RTCCON (*(REG32_PTR_T)(0x3D200000)) /* RTC Control Register */ #define RTCRST (*(REG32_PTR_T)(0x3D200004)) /* RTC Round Reset Register */ #define RTCALM (*(REG32_PTR_T)(0x3D200008)) /* RTC Alarm Control Register */ #define ALMSEC (*(REG32_PTR_T)(0x3D20000C)) /* Alarm Second Data Register */ #define ALMMIN (*(REG32_PTR_T)(0x3D200010)) /* Alarm Minute Data Register */ #define ALMHOUR (*(REG32_PTR_T)(0x3D200014)) /* Alarm Hour Data Register */ #define ALMDATE (*(REG32_PTR_T)(0x3D200018)) /* Alarm Date Data Register */ #define ALMDAY (*(REG32_PTR_T)(0x3D20001C)) /* Alarm Day of Week Data Register */ #define ALMMON (*(REG32_PTR_T)(0x3D200020)) /* Alarm Month Data Register */ #define ALMYEAR (*(REG32_PTR_T)(0x3D200024)) /* Alarm Year Data Register */ #define BCDSEC (*(REG32_PTR_T)(0x3D200028)) /* BCD Second Register */ #define BCDMIN (*(REG32_PTR_T)(0x3D20002C)) /* BCD Minute Register */ #define BCDHOUR (*(REG32_PTR_T)(0x3D200030)) /* BCD Hour Register */ #define BCDDATE (*(REG32_PTR_T)(0x3D200034)) /* BCD Date Register */ #define BCDDAY (*(REG32_PTR_T)(0x3D200038)) /* BCD Day of Week Register */ #define BCDMON (*(REG32_PTR_T)(0x3D20003C)) /* BCD Month Register */ #define BCDYEAR (*(REG32_PTR_T)(0x3D200040)) /* BCD Year Register */ #define RTCIM (*(REG32_PTR_T)(0x3D200044)) /* RTC Interrupt Mode Register */ #define RTCPEND (*(REG32_PTR_T)(0x3D200048)) /* RTC Interrupt Pending Register */ /* 09. WATCHDOG TIMER*/ #define WDTCON (*(REG32_PTR_T)(0x3C800000)) /* Control Register */ #define WDTCNT (*(REG32_PTR_T)(0x3C800004)) /* 11-bits internal counter */ /* 11. 16 BIT TIMER */ #define TACON (*(REG32_PTR_T)(0x3C700000)) /* Control Register for timer A */ #define TACMD (*(REG32_PTR_T)(0x3C700004)) /* Command Register for timer A */ #define TADATA0 (*(REG32_PTR_T)(0x3C700008)) /* Data0 Register */ #define TADATA1 (*(REG32_PTR_T)(0x3C70000C)) /* Data1 Register */ #define TAPRE (*(REG32_PTR_T)(0x3C700010)) /* Pre-scale register */ #define TACNT (*(REG32_PTR_T)(0x3C700014)) /* Counter register */ #define TBCON (*(REG32_PTR_T)(0x3C700020)) /* Control Register for timer B */ #define TBCMD (*(REG32_PTR_T)(0x3C700024)) /* Command Register for timer B */ #define TBDATA0 (*(REG32_PTR_T)(0x3C700028)) /* Data0 Register */ #define TBDATA1 (*(REG32_PTR_T)(0x3C70002C)) /* Data1 Register */ #define TBPRE (*(REG32_PTR_T)(0x3C700030)) /* Pre-scale register */ #define TBCNT (*(REG32_PTR_T)(0x3C700034)) /* Counter register */ #define TCCON (*(REG32_PTR_T)(0x3C700040)) /* Control Register for timer C */ #define TCCMD (*(REG32_PTR_T)(0x3C700044)) /* Command Register for timer C */ #define TCDATA0 (*(REG32_PTR_T)(0x3C700048)) /* Data0 Register */ #define TCDATA1 (*(REG32_PTR_T)(0x3C70004C)) /* Data1 Register */ #define TCPRE (*(REG32_PTR_T)(0x3C700050)) /* Pre-scale register */ #define TCCNT (*(REG32_PTR_T)(0x3C700054)) /* Counter register */ #define TDCON (*(REG32_PTR_T)(0x3C700060)) /* Control Register for timer D */ #define TDCMD (*(REG32_PTR_T)(0x3C700064)) /* Command Register for timer D */ #define TDDATA0 (*(REG32_PTR_T)(0x3C700068)) /* Data0 Register */ #define TDDATA1 (*(REG32_PTR_T)(0x3C70006C)) /* Data1 Register */ #define TDPRE (*(REG32_PTR_T)(0x3C700070)) /* Pre-scale register */ #define TDCNT (*(REG32_PTR_T)(0x3C700074)) /* Counter register */ #define FIVE_USEC_TIMER (((*(REG32_PTR_T)(0x3C700080)) << 32) \ | (*(REG32_PTR_T)(0x3C700084))) /* 64bit 5usec timer */ #define USEC_TIMER ((*(REG32_PTR_T)(0x3C700084)) * 5) /* lower 32 bits of the above as a usec timer */ /* 12. NAND FLASH CONTROLER */ #if CONFIG_CPU==S5L8701 #define FMC_BASE 0x39400000 #else #define FMC_BASE 0x3C200000 #endif #define FMCTRL0 (*(REG32_PTR_T)(FMC_BASE + 0x0000)) /* Control Register0 */ #define FMCTRL1 (*(REG32_PTR_T)(FMC_BASE + 0x0004)) /* Control Register1 */ #define FMCMD (*(REG32_PTR_T)(FMC_BASE + 0x0008)) /* Command Register */ #define FMADDR0 (*(REG32_PTR_T)(FMC_BASE + 0x000C)) /* Address Register0 */ #define FMADDR1 (*(REG32_PTR_T)(FMC_BASE + 0x0010)) /* Address Register1 */ #define FMADDR2 (*(REG32_PTR_T)(FMC_BASE + 0x0014)) /* Address Register2 */ #define FMADDR3 (*(REG32_PTR_T)(FMC_BASE + 0x0018)) /* Address Register3 */ #define FMADDR4 (*(REG32_PTR_T)(FMC_BASE + 0x001C)) /* Address Register4 */ #define FMADDR5 (*(REG32_PTR_T)(FMC_BASE + 0x0020)) /* Address Register5 */ #define FMADDR6 (*(REG32_PTR_T)(FMC_BASE + 0x0024)) /* Address Register6 */ #define FMADDR7 (*(REG32_PTR_T)(FMC_BASE + 0x0028)) /* Address Register7 */ #define FMANUM (*(REG32_PTR_T)(FMC_BASE + 0x002C)) /* Address Counter Register */ #define FMDNUM (*(REG32_PTR_T)(FMC_BASE + 0x0030)) /* Data Counter Register */ #define FMDATAW0 (*(REG32_PTR_T)(FMC_BASE + 0x0034)) /* Write Data Register0 */ #define FMDATAW1 (*(REG32_PTR_T)(FMC_BASE + 0x0038)) /* Write Data Register1 */ #define FMDATAW2 (*(REG32_PTR_T)(FMC_BASE + 0x003C)) /* Write Data Register2 */ #define FMDATAW3 (*(REG32_PTR_T)(FMC_BASE + 0x0040)) /* Write Data Register3 */ #define FMCSTAT (*(REG32_PTR_T)(FMC_BASE + 0x0048)) /* Status Register */ #define FMSYND0 (*(REG32_PTR_T)(FMC_BASE + 0x004C)) /* Hamming Syndrome0 */ #define FMSYND1 (*(REG32_PTR_T)(FMC_BASE + 0x0050)) /* Hamming Syndrome1 */ #define FMSYND2 (*(REG32_PTR_T)(FMC_BASE + 0x0054)) /* Hamming Syndrome2 */ #define FMSYND3 (*(REG32_PTR_T)(FMC_BASE + 0x0058)) /* Hamming Syndrome3 */ #define FMSYND4 (*(REG32_PTR_T)(FMC_BASE + 0x005C)) /* Hamming Syndrome4 */ #define FMSYND5 (*(REG32_PTR_T)(FMC_BASE + 0x0060)) /* Hamming Syndrome5 */ #define FMSYND6 (*(REG32_PTR_T)(FMC_BASE + 0x0064)) /* Hamming Syndrome6 */ #define FMSYND7 (*(REG32_PTR_T)(FMC_BASE + 0x0068)) /* Hamming Syndrome7 */ #define FMFIFO (*(REG32_PTR_T)(FMC_BASE + 0x0080)) /* WRITE/READ FIFO FIXME */ #define RSCRTL (*(REG32_PTR_T)(FMC_BASE + 0x0100)) /* Reed-Solomon Control Register */ #define RSPARITY0_0 (*(REG32_PTR_T)(FMC_BASE + 0x0110)) /* On-the-fly Parity Register0[31:0] */ #define RSPARITY0_1 (*(REG32_PTR_T)(FMC_BASE + 0x0114)) /* On-the-fly Parity Register0[63:32] */ #define RSPARITY0_2 (*(REG32_PTR_T)(FMC_BASE + 0x0118)) /* On-the-fly Parity Register0[71:64] */ #define RSPARITY1_0 (*(REG32_PTR_T)(FMC_BASE + 0x0120)) /* On-the-fly Parity Register1[31:0] */ #define RSPARITY1_1 (*(REG32_PTR_T)(FMC_BASE + 0x0124)) /* On-the-fly Parity Register1[63:32] */ #define RSPARITY1_2 (*(REG32_PTR_T)(FMC_BASE + 0x0128)) /* On-the-fly Parity Register1[71:64] */ #define RSPARITY2_0 (*(REG32_PTR_T)(FMC_BASE + 0x0130)) /* On-the-fly Parity Register2[31:0] */ #define RSPARITY2_1 (*(REG32_PTR_T)(FMC_BASE + 0x0134)) /* On-the-fly Parity Register2[63:32] */ #define RSPARITY2_2 (*(REG32_PTR_T)(FMC_BASE + 0x0138)) /* On-the-fly Parity Register2[71:64] */ #define RSPARITY3_0 (*(REG32_PTR_T)(FMC_BASE + 0x0140)) /* On-the-fly Parity Register3[31:0] */ #define RSPARITY3_1 (*(REG32_PTR_T)(FMC_BASE + 0x0144)) /* On-the-fly Parity Register3[63:32] */ #define RSPARITY3_2 (*(REG32_PTR_T)(FMC_BASE + 0x0148)) /* On-the-fly Parity Register3[71:64] */ #define RSSYND0_0 (*(REG32_PTR_T)(FMC_BASE + 0x0150)) /* On-the-fly Synd Register0[31:0] */ #define RSSYND0_1 (*(REG32_PTR_T)(FMC_BASE + 0x0154)) /* On-the-fly Synd Register0[63:32] */ #define RSSYND0_2 (*(REG32_PTR_T)(FMC_BASE + 0x0158)) /* On-the-fly Synd Register0[71:64] */ #define RSSYND1_0 (*(REG32_PTR_T)(FMC_BASE + 0x0160)) /* On-the-fly Synd Register1[31:0] */ #define RSSYND1_1 (*(REG32_PTR_T)(FMC_BASE + 0x0164)) /* On-the-fly Synd Register1[63:32] */ #define RSSYND1_2 (*(REG32_PTR_T)(FMC_BASE + 0x0168)) /* On-the-fly Synd Register1[71:64] */ #define RSSYND2_0 (*(REG32_PTR_T)(FMC_BASE + 0x0170)) /* On-the-fly Synd Register2[31:0] */ #define RSSYND2_1 (*(REG32_PTR_T)(FMC_BASE + 0x0174)) /* On-the-fly Synd Register2[63:32] */ #define RSSYND2_2 (*(REG32_PTR_T)(FMC_BASE + 0x0178)) /* On-the-fly Synd Register2[71:64] */ #define RSSYND3_0 (*(REG32_PTR_T)(FMC_BASE + 0x0180)) /* On-the-fly Synd Register3[31:0] */ #define RSSYND3_1 (*(REG32_PTR_T)(FMC_BASE + 0x0184)) /* On-the-fly Synd Register3[63:32] */ #define RSSYND3_2 (*(REG32_PTR_T)(FMC_BASE + 0x0188)) /* On-the-fly Synd Register3[71:64] */ #define FLAGSYND (*(REG32_PTR_T)(FMC_BASE + 0x0190)) /* On-the-fly ECC Result Flag */ #define FMCTRL0_ENABLEDMA (1 << 10) #define FMCTRL0_UNK1 (1 << 11) #define FMCTRL1_DOTRANSADDR (1 << 0) #define FMCTRL1_DOREADDATA (1 << 1) #define FMCTRL1_DOWRITEDATA (1 << 2) #define FMCTRL1_CLEARWFIFO (1 << 6) #define FMCTRL1_CLEARRFIFO (1 << 7) #define FMCSTAT_RBB (1 << 0) #define FMCSTAT_RBBDONE (1 << 1) #define FMCSTAT_CMDDONE (1 << 2) #define FMCSTAT_ADDRDONE (1 << 3) #define FMCSTAT_BANK0READY (1 << 4) #define FMCSTAT_BANK1READY (1 << 5) #define FMCSTAT_BANK2READY (1 << 6) #define FMCSTAT_BANK3READY (1 << 7) /* 13. SECURE DIGITAL CARD INTERFACE (SDCI) */ #define SDCI_CTRL (*(REG32_PTR_T)(0x3C300000)) /* Control Register */ #define SDCI_DCTRL (*(REG32_PTR_T)(0x3C300004)) /* Data Control Register */ #define SDCI_CMD (*(REG32_PTR_T)(0x3C300008)) /* Command Register */ #define SDCI_ARGU (*(REG32_PTR_T)(0x3C30000C)) /* Argument Register */ #define SDCI_STATE (*(REG32_PTR_T)(0x3C300010)) /* State Register */ #define SDCI_STAC (*(REG32_PTR_T)(0x3C300014)) /* Status Clear Register */ #define SDCI_DSTA (*(REG32_PTR_T)(0x3C300018)) /* Data Status Register */ #define SDCI_FSTA (*(REG32_PTR_T)(0x3C30001C)) /* FIFO Status Register */ #define SDCI_RESP0 (*(REG32_PTR_T)(0x3C300020)) /* Response0 Register */ #define SDCI_RESP1 (*(REG32_PTR_T)(0x3C300024)) /* Response1 Register */ #define SDCI_RESP2 (*(REG32_PTR_T)(0x3C300028)) /* Response2 Register */ #define SDCI_RESP3 (*(REG32_PTR_T)(0x3C30002C)) /* Response3 Register */ #define SDCI_CLKDIV (*(REG32_PTR_T)(0x3C300030)) /* Clock Divider Register */ #define SDIO_CSR (*(REG32_PTR_T)(0x3C300034)) /* SDIO Control & Status Register */ #define SDIO_IRQ (*(REG32_PTR_T)(0x3C300038)) /* Interrupt Source Register */ /* 14. MEMORY STICK HOST CONTROLLER */ #define MSPRE (*(REG32_PTR_T)(0x3C600000)) /* Prescaler Register */ #define MSINTEN (*(REG32_PTR_T)(0x3C600004)) /* Interrupt Enable Register */ #define MSCMD (*(REG32_PTR_T)(0x3C601000)) /* Command Register */ #define MSFIFO (*(REG32_PTR_T)(0x3C601008)) /* Receive/Transmit Register */ #define MSPP (*(REG32_PTR_T)(0x3C601010)) /* Parallel Port Control/Data Register */ #define MSCTRL2 (*(REG32_PTR_T)(0x3C601014)) /* Control Register 2 */ #define MSACD (*(REG32_PTR_T)(0x3C601018)) /* ACD Command Register */ /* 15. SPDIF TRANSMITTER (SPDIFOUT) */ #define SPDCLKCON (*(REG32_PTR_T)(0x3CB00000)) /* Clock Control Register */ #define SPDCON (*(REG32_PTR_T)(0x3CB00004)) /* Control Register 0020 */ #define SPDBSTAS (*(REG32_PTR_T)(0x3CB00008)) /* Burst Status Register */ #define SPDCSTAS (*(REG32_PTR_T)(0x3CB0000C)) /* Channel Status Register 0x2000 8000 */ #define SPDDAT (*(REG32_PTR_T)(0x3CB00010)) /* SPDIFOUT Data Buffer */ #define SPDCNT (*(REG32_PTR_T)(0x3CB00014)) /* Repetition Count Register */ /* 16. REED-SOLOMON ECC CODEC */ #define ECC_DATA_PTR (*(REG32_PTR_T)(0x39E00004)) /* Data Area Start Pointer */ #define ECC_SPARE_PTR (*(REG32_PTR_T)(0x39E00008)) /* Spare Area Start Pointer */ #define ECC_CTRL (*(REG32_PTR_T)(0x39E0000C)) /* ECC Control Register */ #define ECC_RESULT (*(REG32_PTR_T)(0x39E00010)) /* ECC Result */ #define ECC_UNK1 (*(REG32_PTR_T)(0x39E00014)) /* No idea what this is, but the OFW uses it on S5L8701 */ #define ECC_EVAL0 (*(REG32_PTR_T)(0x39E00020)) /* Error Eval0 Poly */ #define ECC_EVAL1 (*(REG32_PTR_T)(0x39E00024)) /* Error Eval1 Poly */ #define ECC_LOC0 (*(REG32_PTR_T)(0x39E00028)) /* Error Loc0 Poly */ #define ECC_LOC1 (*(REG32_PTR_T)(0x39E0002C)) /* Error Loc1 Poly */ #define ECC_PARITY0 (*(REG32_PTR_T)(0x39E00030)) /* Encode Parity0 Poly */ #define ECC_PARITY1 (*(REG32_PTR_T)(0x39E00034)) /* Encode Pariyt1 Poly */ #define ECC_PARITY2 (*(REG32_PTR_T)(0x39E00038)) /* Encode Parity2 Poly */ #define ECC_INT_CLR (*(REG32_PTR_T)(0x39E00040)) /* Interrupt Clear Register */ #define ECC_SYND0 (*(REG32_PTR_T)(0x39E00044)) /* Syndrom0 Poly */ #define ECC_SYND1 (*(REG32_PTR_T)(0x39E00048)) /* Syndrom1 Poly */ #define ECC_SYND2 (*(REG32_PTR_T)(0x39E0004C)) /* Syndrom2 Poly */ #define ECCCTRL_STARTDECODING (1 << 0) #define ECCCTRL_STARTENCODING (1 << 1) #define ECCCTRL_STARTDECNOSYND (1 << 2) /* 17. IIS Tx/Rx INTERFACE */ #define I2SCLKCON (*(REG32_PTR_T)(0x3CA00000)) /* Clock Control Register */ #define I2STXCON (*(REG32_PTR_T)(0x3CA00004)) /* Tx configuration Register */ #define I2STXCOM (*(REG32_PTR_T)(0x3CA00008)) /* Tx command Register */ #define I2STXDB0 (*(REG32_PTR_T)(0x3CA00010)) /* Tx data buffer */ #define I2SRXCON (*(REG32_PTR_T)(0x3CA00030)) /* Rx configuration Register */ #define I2SRXCOM (*(REG32_PTR_T)(0x3CA00034)) /* Rx command Register */ #define I2SRXDB (*(REG32_PTR_T)(0x3CA00038)) /* Rx data buffer */ #define I2SSTATUS (*(REG32_PTR_T)(0x3CA0003C)) /* status register */ /* 18. IIC BUS INTERFACE */ #define IICCON (*(REG32_PTR_T)(0x3C900000)) /* Control Register */ #define IICSTAT (*(REG32_PTR_T)(0x3C900004)) /* Control/Status Register */ #define IICADD (*(REG32_PTR_T)(0x3C900008)) /* Bus Address Register */ #define IICDS (*(REG32_PTR_T)(0x3C90000C)) /* 19. SPI (SERIAL PERHIPERAL INTERFACE) */ #define SPCLKCON (*(REG32_PTR_T)(0x3CD00000)) /* Clock Control Register */ #define SPCON (*(REG32_PTR_T)(0x3CD00004)) /* Control Register */ #define SPSTA (*(REG32_PTR_T)(0x3CD00008)) /* Status Register */ #define SPPIN (*(REG32_PTR_T)(0x3CD0000C)) /* Pin Control Register */ #define SPTDAT (*(REG32_PTR_T)(0x3CD00010)) /* Tx Data Register */ #define SPRDAT (*(REG32_PTR_T)(0x3CD00014)) /* Rx Data Register */ #define SPPRE (*(REG32_PTR_T)(0x3CD00018)) /* Baud Rate Prescaler Register */ /* 20. ADC CONTROLLER */ #define ADCCON (*(REG32_PTR_T)(0x3CE00000)) /* ADC Control Register */ #define ADCTSC (*(REG32_PTR_T)(0x3CE00004)) /* ADC Touch Screen Control Register */ #define ADCDLY (*(REG32_PTR_T)(0x3CE00008)) /* ADC Start or Interval Delay Register */ #define ADCDAT0 (*(REG32_PTR_T)(0x3CE0000C)) /* ADC Conversion Data Register */ #define ADCDAT1 (*(REG32_PTR_T)(0x3CE00010)) /* ADC Conversion Data Register */ #define ADCUPDN (*(REG32_PTR_T)(0x3CE00014)) /* Stylus Up or Down Interrpt Register */ /* 21. USB 2.0 FUNCTION CONTROLER SPECIAL REGISTER */ #define USB_IR (*(REG32_PTR_T)(0x38800000)) /* Index Register */ #define USB_EIR (*(REG32_PTR_T)(0x38800004)) /* Endpoint Interrupt Register */ #define USB_EIER (*(REG32_PTR_T)(0x38800008)) /* Endpoint Interrupt Enable Register */ #define USB_FAR (*(REG32_PTR_T)(0x3880000C)) /* Function Address Register */ #define USB_FNR (*(REG32_PTR_T)(0x38800010)) /* Frame Number Register */ #define USB_EDR (*(REG32_PTR_T)(0x38800014)) /* Endpoint Direction Register */ #define USB_TR (*(REG32_PTR_T)(0x38800018)) /* Test Register */ #define USB_SSR (*(REG32_PTR_T)(0x3880001C)) /* System Status Register */ #define USB_SCR (*(REG32_PTR_T)(0x38800020)) /* System Control Register */ #define USB_EP0SR (*(REG32_PTR_T)(0x38800024)) /* EP0 Status Register */ #define USB_EP0CR (*(REG32_PTR_T)(0x38800028)) /* EP0 Control Register */ #define USB_ESR (*(REG32_PTR_T)(0x3880002C)) /* Endpoints Status Register */ #define USB_ECR (*(REG32_PTR_T)(0x38800030)) /* Endpoints Control Register */ #define USB_BRCR (*(REG32_PTR_T)(0x38800034)) /* Byte Read Count Register */ #define USB_BWCR (*(REG32_PTR_T)(0x38800038)) /* Byte Write Count Register */ #define USB_MPR (*(REG32_PTR_T)(0x3880003C)) /* Max Packet Register */ #define USB_MCR (*(REG32_PTR_T)(0x38800040)) /* Master Control Register */ #define USB_MTCR (*(REG32_PTR_T)(0x38800044)) /* Master Transfer Counter Register */ #define USB_MFCR (*(REG32_PTR_T)(0x38800048)) /* Master FIFO Counter Register */ #define USB_MTTCR1 (*(REG32_PTR_T)(0x3880004C)) /* Master Total Transfer Counter1 Register */ #define USB_MTTCR2 (*(REG32_PTR_T)(0x38800050)) /* Master Total Transfer Counter2 Register */ #define USB_EP0BR (*(REG32_PTR_T)(0x38800060)) /* EP0 Buffer Register */ #define USB_EP1BR (*(REG32_PTR_T)(0x38800064)) /* EP1 Buffer Register */ #define USB_EP2BR (*(REG32_PTR_T)(0x38800068)) /* EP2 Buffer Register */ #define USB_EP3BR (*(REG32_PTR_T)(0x3880006C)) /* EP3 Buffer Register */ #define USB_EP4BR (*(REG32_PTR_T)(0x38800070)) /* EP4 Buffer Register */ #define USB_EP5BR (*(REG32_PTR_T)(0x38800074)) /* EP5 Buffer Register */ #define USB_EP6BR (*(REG32_PTR_T)(0x38800078)) /* EP6 Buffer Register */ #define USB_MICR (*(REG32_PTR_T)(0x38800084)) /* Master Interface Counter Register */ #define USB_MBAR1 (*(REG32_PTR_T)(0x38800088)) /* Memory Base Address Register1 */ #define USB_MBAR2 (*(REG32_PTR_T)(0x3880008C)) /* Memory Base Address Register2 */ #define USB_MCAR1 (*(REG32_PTR_T)(0x38800094)) /* Memory Current Address Register1 */ #define USB_MCAR2 (*(REG32_PTR_T)(0x38800098)) /* Memory Current Address Register2 */ /* 22. USB 1.1 HOST CONTROLLER SPECIAL REGISTER */ #define HcRevision (*(REG32_PTR_T)(0x38600000)) #define HcControl (*(REG32_PTR_T)(0x38600004)) #define HcCommandStatus (*(REG32_PTR_T)(0x38600008)) #define HcInterruptStatus (*(REG32_PTR_T)(0x3860000C)) #define HcInterruptEnable (*(REG32_PTR_T)(0x38600010)) #define HcInterruptDisable (*(REG32_PTR_T)(0x38600014)) #define HcHCCA (*(REG32_PTR_T)(0x38600018)) #define HcPeriodCurrentED (*(REG32_PTR_T)(0x3860001C)) #define HcControlHeadED (*(REG32_PTR_T)(0x38600020)) #define HcControlCurrentED (*(REG32_PTR_T)(0x38600024)) #define HcBulkHeadED (*(REG32_PTR_T)(0x38600028)) #define HcBulkCurrentED (*(REG32_PTR_T)(0x3860002C)) #define HcDoneHead (*(REG32_PTR_T)(0x38600030)) #define HcFmInterval (*(REG32_PTR_T)(0x38600034)) #define HcFmRemaining (*(REG32_PTR_T)(0x38600038)) #define HcFmNumber (*(REG32_PTR_T)(0x3860003C)) #define HcPeriodicStart (*(REG32_PTR_T)(0x38600040)) #define HcLSThreshold (*(REG32_PTR_T)(0x38600044)) #define HcRhDescriptorA (*(REG32_PTR_T)(0x38600048)) #define HcRhDescriptorB (*(REG32_PTR_T)(0x3860004C)) #define HcRhStatus (*(REG32_PTR_T)(0x38600050)) #define HcRhPortStatus (*(REG32_PTR_T)(0x38600054)) /* 23. USB 2.0 PHY CONTROL */ #define PHYCTRL (*(REG32_PTR_T)(0x3C400000)) /* USB2.0 PHY Control Register */ #define PHYPWR (*(REG32_PTR_T)(0x3C400004)) /* USB2.0 PHY Power Control Register */ #define URSTCON (*(REG32_PTR_T)(0x3C400008)) /* USB Reset Control Register */ #define UCLKCON (*(REG32_PTR_T)(0x3C400010)) /* USB Clock Control Register */ /* 24. GPIO PORT CONTROL */ #define PCON0 (*(REG32_PTR_T)(0x3CF00000)) /* Configures the pins of port 0 */ #define PDAT0 (*(REG32_PTR_T)(0x3CF00004)) /* The data register for port 0 */ #define PCON1 (*(REG32_PTR_T)(0x3CF00010)) /* Configures the pins of port 1 */ #define PDAT1 (*(REG32_PTR_T)(0x3CF00014)) /* The data register for port 1 */ #define PCON2 (*(REG32_PTR_T)(0x3CF00020)) /* Configures the pins of port 2 */ #define PDAT2 (*(REG32_PTR_T)(0x3CF00024)) /* The data register for port 2 */ #define PCON3 (*(REG32_PTR_T)(0x3CF00030)) /* Configures the pins of port 3 */ #define PDAT3 (*(REG32_PTR_T)(0x3CF00034)) /* The data register for port 3 */ #define PCON4 (*(REG32_PTR_T)(0x3CF00040)) /* Configures the pins of port 4 */ #define PDAT4 (*(REG32_PTR_T)(0x3CF00044)) /* The data register for port 4 */ #define PCON5 (*(REG32_PTR_T)(0x3CF00050)) /* Configures the pins of port 5 */ #define PDAT5 (*(REG32_PTR_T)(0x3CF00054)) /* The data register for port 5 */ #define PUNK5 (*(REG32_PTR_T)(0x3CF0005C)) /* Unknown thing for port 5 */ #define PCON6 (*(REG32_PTR_T)(0x3CF00060)) /* Configures the pins of port 6 */ #define PDAT6 (*(REG32_PTR_T)(0x3CF00064)) /* The data register for port 6 */ #define PCON7 (*(REG32_PTR_T)(0x3CF00070)) /* Configures the pins of port 7 */ #define PDAT7 (*(REG32_PTR_T)(0x3CF00074)) /* The data register for port 7 */ #define PCON10 (*(REG32_PTR_T)(0x3CF000A0)) /* Configures the pins of port 10 */ #define PDAT10 (*(REG32_PTR_T)(0x3CF000A4)) /* The data register for port 10 */ #define PCON11 (*(REG32_PTR_T)(0x3CF000B0)) /* Configures the pins of port 11 */ #define PDAT11 (*(REG32_PTR_T)(0x3CF000B4)) /* The data register for port 11 */ #define PCON13 (*(REG32_PTR_T)(0x3CF000D0)) /* Configures the pins of port 13 */ #define PDAT13 (*(REG32_PTR_T)(0x3CF000D4)) /* The data register for port 13 */ #define PCON14 (*(REG32_PTR_T)(0x3CF000E0)) /* Configures the pins of port 14 */ #define PDAT14 (*(REG32_PTR_T)(0x3CF000E4)) /* The data register for port 14 */ #define PCON_ASRAM (*(REG32_PTR_T)(0x3CF000F0)) /* Configures the pins of port nor flash */ #define PCON_SDRAM (*(REG32_PTR_T)(0x3CF000F4)) /* Configures the pins of port sdram */ /* 25. UART */ /* UART 0 */ #define ULCON0 (*(REG32_PTR_T)(0x3CC00000)) /* Line Control Register */ #define UCON0 (*(REG32_PTR_T)(0x3CC00004)) /* Control Register */ #define UFCON0 (*(REG32_PTR_T)(0x3CC00008)) /* FIFO Control Register */ #define UMCON0 (*(REG32_PTR_T)(0x3CC0000C)) /* Modem Control Register */ #define UTRSTAT0 (*(REG32_PTR_T)(0x3CC00010)) /* Tx/Rx Status Register */ #define UERSTAT0 (*(REG32_PTR_T)(0x3CC00014)) /* Rx Error Status Register */ #define UFSTAT0 (*(REG32_PTR_T)(0x3CC00018)) /* FIFO Status Register */ #define UMSTAT0 (*(REG32_PTR_T)(0x3CC0001C)) /* Modem Status Register */ #define UTXH0 (*(REG32_PTR_T)(0x3CC00020)) /* Transmit Buffer Register */ #define URXH0 (*(REG32_PTR_T)(0x3CC00024)) /* Receive Buffer Register */ #define UBRDIV0 (*(REG32_PTR_T)(0x3CC00028)) /* Baud Rate Divisor Register */ /* UART 1*/ #define ULCON1 (*(REG32_PTR_T)(0x3CC08000)) /* Line Control Register */ #define UCON1 (*(REG32_PTR_T)(0x3CC08004)) /* Control Register */ #define UFCON1 (*(REG32_PTR_T)(0x3CC08008)) /* FIFO Control Register */ #define UMCON1 (*(REG32_PTR_T)(0x3CC0800C)) /* Modem Control Register */ #define UTRSTAT1 (*(REG32_PTR_T)(0x3CC08010)) /* Tx/Rx Status Register */ #define UERSTAT1 (*(REG32_PTR_T)(0x3CC08014)) /* Rx Error Status Register */ #define UFSTAT1 (*(REG32_PTR_T)(0x3CC08018)) /* FIFO Status Register */ #define UMSTAT1 (*(REG32_PTR_T)(0x3CC0801C)) /* Modem Status Register */ #define UTXH1 (*(REG32_PTR_T)(0x3CC08020)) /* Transmit Buffer Register */ #define URXH1 (*(REG32_PTR_T)(0x3CC08024)) /* Receive Buffer Register */ #define UBRDIV1 (*(REG32_PTR_T)(0x3CC08028)) /* Baud Rate Divisor Register */ /* 26. LCD INTERFACE CONTROLLER */ #if CONFIG_CPU==S5L8700 #define LCD_BASE 0x3C100000 #else /* CPU_S5L8701 */ #define LCD_BASE 0x38600000 #endif #define LCD_CON (*(REG16_PTR_T)(LCD_BASE+0x00)) /* Control register. */ #define LCD_WCMD (*(REG16_PTR_T)(LCD_BASE+0x04)) /* Write command register. */ #define LCD_RCMD (*(REG16_PTR_T)(LCD_BASE+0x0C)) /* Read command register. */ #define LCD_RDATA (*(REG16_PTR_T)(LCD_BASE+0x10)) /* Read data register. */ #define LCD_DBUFF (*(REG16_PTR_T)(LCD_BASE+0x14)) /* Read Data buffer */ #define LCD_INTCON (*(REG16_PTR_T)(LCD_BASE+0x18)) /* Interrupt control register */ #define LCD_STATUS (*(REG16_PTR_T)(LCD_BASE+0x1C)) /* LCD Interface status 0106 */ #define LCD_PHTIME (*(REG16_PTR_T)(LCD_BASE+0x20)) /* Phase time register 0060 */ #define LCD_RST_TIME (*(REG16_PTR_T)(LCD_BASE+0x24)) /* Reset active period 07FF */ #define LCD_DRV_RST (*(REG16_PTR_T)(LCD_BASE+0x28)) /* Reset drive signal */ #define LCD_WDATA (*(REG16_PTR_T)(LCD_BASE+0x40)) /* Write data register FIXME */ /* 27. CLCD CONTROLLER */ #define LCDCON1 (*(REG32_PTR_T)(0x39200000)) /* LCD control 1 register */ #define LCDCON2 (*(REG32_PTR_T)(0x39200004)) /* LCD control 2 register */ #define LCDTCON1 (*(REG32_PTR_T)(0x39200008)) /* LCD time control 1 register */ #define LCDTCON2 (*(REG32_PTR_T)(0x3920000C)) /* LCD time control 2 register */ #define LCDTCON3 (*(REG32_PTR_T)(0x39200010)) /* LCD time control 3 register */ #define LCDOSD1 (*(REG32_PTR_T)(0x39200014)) /* LCD OSD control 1 register */ #define LCDOSD2 (*(REG32_PTR_T)(0x39200018)) /* LCD OSD control 2 register */ #define LCDOSD3 (*(REG32_PTR_T)(0x3920001C)) /* LCD OSD control 3 register */ #define LCDB1SADDR1 (*(REG32_PTR_T)(0x39200020)) /* Frame buffer start address register for Back-Ground buffer 1 */ #define LCDB2SADDR1 (*(REG32_PTR_T)(0x39200024)) /* Frame buffer start address register for Back-Ground buffer 2 */ #define LCDF1SADDR1 (*(REG32_PTR_T)(0x39200028)) /* Frame buffer start address register for Fore-Ground (OSD) buffer 1 */ #define LCDF2SADDR1 (*(REG32_PTR_T)(0x3920002C)) /* Frame buffer start address register for Fore-Ground (OSD) buffer 2 */ #define LCDB1SADDR2 (*(REG32_PTR_T)(0x39200030)) /* Frame buffer end address register for Back-Ground buffer 1 */ #define LCDB2SADDR2 (*(REG32_PTR_T)(0x39200034)) /* Frame buffer end address register for Back-Ground buffer 2 */ #define LCDF1SADDR2 (*(REG32_PTR_T)(0x39200038)) /* Frame buffer end address register for Fore-Ground (OSD) buffer 1 */ #define LCDF2SADDR2 (*(REG32_PTR_T)(0x3920003C)) /* Frame buffer end address register for Fore-Ground (OSD) buffer 2 */ #define LCDB1SADDR3 (*(REG32_PTR_T)(0x39200040)) /* Virtual screen address set for Back-Ground buffer 1 */ #define LCDB2SADDR3 (*(REG32_PTR_T)(0x39200044)) /* Virtual screen address set for Back-Ground buffer 2 */ #define LCDF1SADDR3 (*(REG32_PTR_T)(0x39200048)) /* Virtual screen address set for Fore-Ground(OSD) buffer 1 */ #define LCDF2SADDR3 (*(REG32_PTR_T)(0x3920004C)) /* Virtual screen address set for Fore-Ground(OSD) buffer 2 */ #define LCDINTCON (*(REG32_PTR_T)(0x39200050)) /* Indicate the LCD interrupt control register */ #define LCDKEYCON (*(REG32_PTR_T)(0x39200054)) /* Color key control register */ #define LCDCOLVAL (*(REG32_PTR_T)(0x39200058)) /* Color key value ( transparent value) register */ #define LCDBGCON (*(REG32_PTR_T)(0x3920005C)) /* Back-Ground color control */ #define LCDFGCON (*(REG32_PTR_T)(0x39200060)) /* Fore-Ground color control */ #define LCDDITHMODE (*(REG32_PTR_T)(0x39200064)) /* Dithering mode register. */ /* 28. ATA CONTROLLER */ #define ATA_CONTROL (*(REG32_PTR_T)(0x38E00000)) /* Enable and clock down status */ #define ATA_STATUS (*(REG32_PTR_T)(0x38E00004)) /* Status */ #define ATA_COMMAND (*(REG32_PTR_T)(0x38E00008)) /* Command */ #define ATA_SWRST (*(REG32_PTR_T)(0x38E0000C)) /* Software reset */ #define ATA_IRQ (*(REG32_PTR_T)(0x38E00010)) /* Interrupt sources */ #define ATA_IRQ_MASK (*(REG32_PTR_T)(0x38E00014)) /* Interrupt mask */ #define ATA_CFG (*(REG32_PTR_T)(0x38E00018)) /* Configuration for ATA interface */ #define ATA_PIO_TIME (*(REG32_PTR_T)(0x38E0002C)) /* PIO timing */ #define ATA_UDMA_TIME (*(REG32_PTR_T)(0x38E00030)) /* UDMA timing */ #define ATA_XFR_NUM (*(REG32_PTR_T)(0x38E00034)) /* Transfer number */ #define ATA_XFR_CNT (*(REG32_PTR_T)(0x38E00038)) /* Current transfer count */ #define ATA_TBUF_START (*(REG32_PTR_T)(0x38E0003C)) /* Start address of track buffer */ #define ATA_TBUF_SIZE (*(REG32_PTR_T)(0x38E00040)) /* Size of track buffer */ #define ATA_SBUF_START (*(REG32_PTR_T)(0x38E00044)) /* Start address of Source buffer1 */ #define ATA_SBUF_SIZE (*(REG32_PTR_T)(0x38E00048)) /* Size of source buffer1 */ #define ATA_CADR_TBUF (*(REG32_PTR_T)(0x38E0004C)) /* Current write address of track buffer */ #define ATA_CADR_SBUF (*(REG32_PTR_T)(0x38E00050)) /* Current read address of source buffer */ #define ATA_PIO_DTR (*(REG32_PTR_T)(0x38E00054)) /* PIO device data register */ #define ATA_PIO_FED (*(REG32_PTR_T)(0x38E00058)) /* PIO device Feature/Error register */ #define ATA_PIO_SCR (*(REG32_PTR_T)(0x38E0005C)) /* PIO sector count register */ #define ATA_PIO_LLR (*(REG32_PTR_T)(0x38E00060)) /* PIO device LBA low register */ #define ATA_PIO_LMR (*(REG32_PTR_T)(0x38E00064)) /* PIO device LBA middle register */ #define ATA_PIO_LHR (*(REG32_PTR_T)(0x38E00068)) /* PIO device LBA high register */ #define ATA_PIO_DVR (*(REG32_PTR_T)(0x38E0006C)) /* PIO device register */ #define ATA_PIO_CSD (*(REG32_PTR_T)(0x38E00070)) /* PIO device command/status register */ #define ATA_PIO_DAD (*(REG32_PTR_T)(0x38E00074)) /* PIO control/alternate status register */ #define ATA_PIO_READY (*(REG32_PTR_T)(0x38E00078)) /* PIO data read/write ready */ #define ATA_PIO_RDATA (*(REG32_PTR_T)(0x38E0007C)) /* PIO read data from device register */ #define BUS_FIFO_STATUS (*(REG32_PTR_T)(0x38E00080)) /* Reserved */ #define ATA_FIFO_STATUS (*(REG32_PTR_T)(0x38E00084)) /* Reserved */ /* 29. CHIP ID */ #define REG_ONE (*(REG32_PTR_T)(0x3D100000)) /* Receive the first 32 bits from a fuse box */ #define REG_TWO (*(REG32_PTR_T)(0x3D100004)) /* Receive the other 8 bits from a fuse box */ /* Hardware AES crypto unit - S5L8701 only */ #if CONFIG_CPU==S5L8701 #define ICONSRCPND (*(REG32_PTR_T)(0x39C00000)) #define ICONINTPND (*(REG32_PTR_T)(0x39C00010)) #define AESCONTROL (*(REG32_PTR_T)(0x39800000)) #define AESGO (*(REG32_PTR_T)(0x39800004)) #define AESUNKREG0 (*(REG32_PTR_T)(0x39800008)) #define AESSTATUS (*(REG32_PTR_T)(0x3980000C)) #define AESUNKREG1 (*(REG32_PTR_T)(0x39800010)) #define AESKEYLEN (*(REG32_PTR_T)(0x39800014)) #define AESOUTSIZE (*(REG32_PTR_T)(0x39800018)) #define AESOUTADDR (*(REG32_PTR_T)(0x39800020)) #define AESINSIZE (*(REG32_PTR_T)(0x39800024)) #define AESINADDR (*(REG32_PTR_T)(0x39800028)) #define AESAUXSIZE (*(REG32_PTR_T)(0x3980002C)) #define AESAUXADDR (*(REG32_PTR_T)(0x39800030)) #define AESSIZE3 (*(REG32_PTR_T)(0x39800034)) #define AESTYPE (*(REG32_PTR_T)(0x3980006C)) #define HASHCTRL (*(REG32_PTR_T)(0x3C600000)) #define HASHRESULT ((REG32_PTR_T)(0x3C600020)) #define HASHDATAIN ((REG32_PTR_T)(0x3C600040)) #endif /* CONFIG_CPU==S5L8701 */