/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2006 by Michael Sevakis * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include #include "config.h" #include "system.h" #include "kernel.h" #include "logf.h" #include "audio.h" #include "sound.h" #include "file.h" #include "pcm-internal.h" /* PCM interrupt routine lockout */ static struct { int locked; unsigned long state; } dma_play_lock = { .locked = 0, .state = 0, }; #define FIFO_COUNT ((IISFCON >> 6) & 0x3F) /* Setup for the DMA controller */ #define DMA_CONTROL_SETUP ((1<<31) | (1<<29) | (1<<23) | (1<<22) | (1<<20)) #ifdef HAVE_UDA1341 /* for PCLK = 50 MHz, frame size = 32 */ /* [prescaler, master clock rate] */ static const unsigned char pcm_freq_parms[HW_NUM_FREQ][2] = { [HW_FREQ_44] = { 2, IISMOD_MASTER_CLOCK_384FS }, [HW_FREQ_22] = { 8, IISMOD_MASTER_CLOCK_256FS }, [HW_FREQ_11] = { 17, IISMOD_MASTER_CLOCK_256FS }, }; #endif /* DMA count has hit zero - no more data */ /* Get more data from the callback and top off the FIFO */ void fiq_handler(void) __attribute__((interrupt ("FIQ"))); /* Mask the DMA interrupt */ void pcm_play_lock(void) { if (++dma_play_lock.locked == 1) bitset32(&INTMSK, DMA2_MASK); } /* Unmask the DMA interrupt if enabled */ void pcm_play_unlock(void) { if (--dma_play_lock.locked == 0) bitclr32(&INTMSK, dma_play_lock.state); } void pcm_play_dma_init(void) { /* There seem to be problems when changing the IIS interface configuration * when a clock is not present. */ bitset32(&CLKCON, 1<<17); #ifdef HAVE_UDA1341 /* master, transmit mode, 16 bit samples, BCLK 32fs, PCLK */ IISMOD = IISMOD_MASTER_CLOCK_PCLK | IISMOD_MASTER_MODE | IISMOD_TRANSMIT_MODE | IISMOD_16_BIT | IISMOD_MASTER_CLOCK_256FS | IISMOD_BIT_CLOCK_32FS; /* TX idle, enable prescaler */ IISCON |= IISCON_TX_IDLE | IISCON_IIS_PRESCALER_ENABLE; #else /* slave, transmit mode, 16 bit samples - MCLK 384fs - use 16.9344Mhz - BCLK 32fs */ IISMOD = (1<<9) | (1<<8) | (2<<6) | (1<<3) | (1<<2) | (1<<0); /* RX,TX off,on */ IISCON |= (1<<3) | (1<<2); #endif bitclr32(&CLKCON, 1<<17); audiohw_init(); /* init GPIO */ #ifdef GIGABEAT_F /* GPCCON = (GPCCON & ~(3<<14)) | (1<<14); */ S3C244_GPIO_CONFIG (GPCCON, 7, GPIO_OUTPUT); GPCDAT |= (1<<7); #endif /* GPE4=I2SDO, GPE3=I2SDI, GPE2=CDCLK, GPE1=I2SSCLK, GPE0=I2SLRCK */ GPECON = (GPECON & ~0x3ff) | 0x2aa; /* Do not service DMA requests, yet */ /* clear any pending int and mask it */ bitset32(&INTMSK, DMA2_MASK); SRCPND = DMA2_MASK; /* connect to FIQ */ bitset32(&INTMOD, DMA2_MASK); } void pcm_play_dma_postinit(void) { audiohw_postinit(); } void pcm_dma_apply_settings(void) { #ifdef HAVE_UDA1341 unsigned int reg_val; /* set prescaler and master clock rate according to freq */ reg_val = (pcm_freq_parms [pcm_fsel][0] << 5) | pcm_freq_parms [pcm_fsel][0]; IISMOD = (IISMOD & ~IISMOD_MASTER_CLOCK_384FS) | pcm_freq_parms [pcm_fsel][1] ; IISPSR = reg_val; #endif audiohw_set_frequency(pcm_fsel); } /* Connect the DMA and start filling the FIFO */ static void play_start_pcm(void) { /* clear pending DMA interrupt */ SRCPND = DMA2_MASK; /* Flush any pending writes */ commit_dcache_range((char*)DISRC2-0x30000000, (DCON2 & 0xFFFFF) * 2); /* unmask DMA interrupt when unlocking */ dma_play_lock.state = DMA2_MASK; /* turn on the request */ IISCON |= (1<<5); /* Activate the channel */ DMASKTRIG2 = 0x2; /* turn off the idle */ IISCON &= ~(1<<3); #ifdef HAVE_UDA1341 IISMOD = (IISMOD & ~IISMOD_MASTER_CLOCK_384FS) | pcm_freq_parms [pcm_fsel][1] ; IISPSR = (pcm_freq_parms [pcm_fsel][0] << 5) | pcm_freq_parms [pcm_fsel][0]; #endif /* start the IIS */ IISCON |= (1<<0); } /* Disconnect the DMA and wait for the FIFO to clear */ static void play_stop_pcm(void) { /* Mask DMA interrupt */ bitset32(&INTMSK, DMA2_MASK); /* De-Activate the DMA channel */ DMASKTRIG2 = 0x4; /* are we playing? wait for the chunk to finish */ if (dma_play_lock.state != 0) { /* wait for the FIFO to empty and DMA to stop */ while ((IISCON & (1<<7)) || (DMASKTRIG2 & 0x2)); } /* Keep interrupt masked when unlocking */ dma_play_lock.state = 0; /* turn off the request */ IISCON &= ~(1<<5); /* turn on the idle */ IISCON |= (1<<3); /* stop the IIS */ IISCON &= ~(1<<0); } void pcm_play_dma_start(const void *addr, size_t size) { /* Enable the IIS clock */ bitset32(&CLKCON, 1<<17); /* stop any DMA in progress - idle IIS */ play_stop_pcm(); /* connect DMA to the FIFO and enable the FIFO */ IISFCON = (1<<15) | (1<<13); /* set DMA dest */ DIDST2 = (unsigned int)&IISFIFO; /* IIS is on the APB bus, INT when TC reaches 0, fixed dest addr */ DIDSTC2 = 0x03; /* set DMA source and options */ DISRC2 = (unsigned int)addr + 0x30000000; /* How many transfers to make - we transfer half-word at a time = 2 bytes */ /* DMA control: CURR_TC int, single service mode, I2SSDO int, HW trig */ /* no auto-reload, half-word (16bit) */ DCON2 = DMA_CONTROL_SETUP | (size / 2); DISRCC2 = 0x00; /* memory is on AHB bus, increment addresses */ play_start_pcm(); } /* Promptly stop DMA transfers and stop IIS */ void pcm_play_dma_stop(void) { play_stop_pcm(); /* Disconnect the IIS clock */ bitclr32(&CLKCON, 1<<17); } void fiq_handler(void) { static const void *start; static size_t size; /* clear any pending interrupt */ SRCPND = DMA2_MASK; /* Buffer empty. Try to get more. */ if (!pcm_play_dma_complete_callback(PCM_DMAST_OK, &start, &size)) return; /* Flush any pending cache writes */ commit_dcache_range(start, size); /* set the new DMA values */ DCON2 = DMA_CONTROL_SETUP | (size >> 1); DISRC2 = (unsigned int)start + 0x30000000; /* Re-Activate the channel */ DMASKTRIG2 = 0x2; pcm_play_dma_status_callback(PCM_DMAST_STARTED); }