/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2011 by Marcin Bukat * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "kernel.h" #include "system.h" #include "panic.h" #include "system-target.h" #define default_interrupt(name) \ extern __attribute__((weak,alias("UIRQ"))) void name (void) void irq_handler(void) __attribute__((interrupt ("IRQ"), naked)); void fiq_handler(void) __attribute__((interrupt ("FIQ"), naked, \ weak, alias("fiq_dummy"))); default_interrupt(INT_UART0); default_interrupt(INT_UART1); default_interrupt(INT_TIMER0); default_interrupt(INT_TIMER1); default_interrupt(INT_TIMER2); default_interrupt(INT_GPIO0); default_interrupt(INT_SW_INT0); default_interrupt(INT_AHB0_MAILBOX); default_interrupt(INT_RTC); default_interrupt(INT_SCU); default_interrupt(INT_SD); default_interrupt(INT_SPI); default_interrupt(INT_HDMA); default_interrupt(INT_A2A_BRIDGE); default_interrupt(INT_I2C); default_interrupt(INT_I2S); default_interrupt(INT_UDC); default_interrupt(INT_UHC); default_interrupt(INT_PWM0); default_interrupt(INT_PWM1); default_interrupt(INT_PWM2); default_interrupt(INT_PWM3); default_interrupt(INT_ADC); default_interrupt(INT_GPIO1); default_interrupt(INT_VIP); default_interrupt(INT_DWDMA); default_interrupt(INT_NANDC); default_interrupt(INT_LCDC); default_interrupt(INT_DSP); default_interrupt(INT_SW_INT1); default_interrupt(INT_SW_INT2); default_interrupt(INT_SW_INT3); static void (* const irqvector[])(void) = { INT_UART0,INT_UART1,INT_TIMER0,INT_TIMER1,INT_TIMER2,INT_GPIO0,INT_SW_INT0,INT_AHB0_MAILBOX, INT_RTC,INT_SCU,INT_SD,INT_SPI,INT_HDMA,INT_A2A_BRIDGE,INT_I2C,INT_I2S, INT_UDC,INT_UHC,INT_PWM0,INT_PWM1,INT_PWM2,INT_PWM3,INT_ADC,INT_GPIO1, INT_VIP,INT_DWDMA,INT_NANDC,INT_LCDC,INT_DSP,INT_SW_INT1,INT_SW_INT2,INT_SW_INT3 }; static const char * const irqname[] = { "INT_UART0","INT_UART1","INT_TIMER0","INT_TIMER1","INT_TIMER2","INT_GPIO0","INT_SW_INT0","INT_AHB0_MAILBOX", "INT_RTC","INT_SCU","INT_SD","INT_SPI","INT_HDMA","INT_A2A_BRIDGE","INT_I2C","INT_I2S", "INT_UDC","INT_UHC","INT_PWM0","INT_PWM1","INT_PWM2","INT_PWM3","INT_ADC","INT_GPIO1", "INT_VIP","INT_DWDMA","INT_NANDC","INT_LCDC","INT_DSP","INT_SW_INT1","INT_SW_INT2","INT_SW_INT3" }; static void UIRQ(void) { unsigned int offset = INTC_ISR & 0x1f; panicf("Unhandled IRQ %02X: %s", offset, irqname[offset]); } void irq_handler(void) { /* * Based on: linux/arch/arm/kernel/entry-armv.S and system-meg-fx.c */ asm volatile( "stmfd sp!, {r0-r7, ip, lr} \n" /* Store context */ "sub sp, sp, #8 \n"); /* Reserve stack */ int irq_no = INTC_ISR & 0x1f; irqvector[irq_no](); /* clear interrupt */ INTC_ICCR = (1 << irq_no); asm volatile( "add sp, sp, #8 \n" /* Cleanup stack */ "ldmfd sp!, {r0-r7, ip, lr} \n" /* Restore context */ "subs pc, lr, #4 \n"); /* Return from IRQ */ } void fiq_dummy(void) { asm volatile ( "subs pc, lr, #4 \r\n" ); } void system_init(void) { #ifndef BOOTLOADER /* SDRAM tweaks */ MCSDR_MODE = (2<<4)|3; /* CAS=2, burst=8 */ MCSDR_T_REF = (125*100) >> 3; /* 125/8 = 15.625 autorefresh interval */ MCSDR_T_RFC = (64*100) / 1000; /* autorefresh period */ MCSDR_T_RP = 1; /* precharge period */ MCSDR_T_RCD = 1; /* active to RD/WR delay */ /* turn off clock for unused modules */ SCU_CLKCFG |= (1<<31) | /* WDT pclk */ (1<<30) | /* RTC pclk */ (1<<26) | /* HS_ADC clock */ (1<<25) | /* HS_ADC HCLK */ (1<<21) | /* SPI clock */ (1<<19) | /* UART1 clock */ (1<<18) | /* UART0 clock */ (1<<15) | /* VIP clock */ (1<<14) | /* VIP HCLK */ (1<<13) | /* LCDC clock */ (1<<9) | /* NAND HCLK */ (1<<5) | /* USB host HCLK */ (1<<1) | /* DSP clock */ (1<<0); /* OTP clock (dunno what it is */ /* turn off DSP pll */ SCU_PLLCON2 |= (1<<22); /* turn off codec pll */ SCU_PLLCON3 |= (1<<22); #endif } /* not tested */ void system_reboot(void) { /* use Watchdog to reset */ SCU_CLKCFG &= ~(1<<31); WDTLR = 1; WDTCON = (1<<4) | (1<<3); /* Wait for reboot to kick in */ while(1); } void system_exception_wait(void) { while(1); } int system_memory_guard(int newmode) { (void)newmode; return 0; } /* usecs may be at most 2^32/200 (~21 seconds) for 200MHz max cpu freq */ void udelay(unsigned usecs) { unsigned cycles_per_usec; unsigned delay; if (cpu_frequency == CPUFREQ_MAX) { cycles_per_usec = (CPUFREQ_MAX + 999999) / 1000000; } else { cycles_per_usec = (CPUFREQ_NORMAL + 999999) / 1000000; } delay = (usecs * cycles_per_usec + 3) / 4; asm volatile( "1: subs %0, %0, #1 \n" /* 1 cycle */ " bne 1b \n" /* 3 cycles */ : : "r"(delay) ); } void commit_discard_idcache(void) { /* invalidate cache way 0 */ CACHEOP = 0x02; /* wait for invalidate process to complete */ while (CACHEOP & 0x03); /* invalidate cache way 1 */ CACHEOP = 0x80000002; /* wait for invalidate process to complete */ while (CACHEOP & 0x03); } void commit_discard_dcache (void) __attribute__((alias("commit_discard_idcache"))); void commit_discard_dcache_range (const void *base, unsigned int size) { int cnt = size + ((unsigned long)base & 0x1f); unsigned long opcode = ((unsigned long)base & 0xffffffe0) | 0x01; while (cnt > 0) { CACHEOP = opcode; while (CACHEOP & 0x03); cnt -= 32; opcode += 32; } }