/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * * Copyright (C) 2003-2005 Jörg Hohensohn * * Alpine CD changer Project * This is a feasibility study for Archos emulating an Alpine M-Bus CD changer. * * Currently it will do seeks and change tracks, but nothing like disks. * The debug version shows a dump of the M-Bus communication on screen. * * Usage: Start plugin, it will stay in the background and do the emulation. * You need to make an adapter with an 8-pin DIN plug for the radio at one end * and a 4-ring 3.5 mm plug for the Archos headphone jack at the other. * The Archos remote pin connects to the M-Bus, audio as usual. * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "plugin.h" /* Only build for (correct) target */ #if !defined(SIMULATOR) && CONFIG_CPU==SH7034 && !defined(HAVE_MMC) PLUGIN_HEADER #ifdef HAVE_LCD_CHARCELLS /* player model */ #define LINES 2 #define COLUMNS 11 #else /* recorder models */ #define LINES 8 #define COLUMNS 32 /* can't really tell for proportional font */ #endif /****************** imports ******************/ #include "sh7034.h" #include "system.h" /****************** constants ******************/ /* measured bit time on the M-Bus is 3.075 ms = 325.2 Hz */ #define MBUS_BAUDRATE 3252 /* make it 10 * bittime */ #define MBUS_STEP_FREQ (MBUS_BAUDRATE/2) /* 5 steps per bit */ #define MBUS_BIT_FREQ (MBUS_BAUDRATE/10) /* the true bit frequency again */ #define MBUS_MAX_SIZE 16 /* maximum length of an M-Bus packet, incl. checksum */ #define MBUS_RCV_QUEUESIZE 4 /* how many packets can be queued by receiver */ #define ERI1 (*((volatile unsigned long*)0x090001A0)) /* RX error */ #define RXI1 (*((volatile unsigned long*)0x090001A4)) /* RX */ #define PB10 0x0400 /* receive status */ #define RX_BUSY 0 /* reception in progress */ #define RX_RECEIVED 1 /* valid data available */ #define RX_FRAMING 2 /* frame error */ #define RX_OVERRUN 3 /* receiver overrun */ #define RX_PARITY 4 /* parity error */ #define RX_SYMBOL 5 /* invalid bit timing */ #define RX_OVERFLOW 6 /* buffer full */ #define RX_OVERLAP 7 /* receive interrupt while transmitting */ /* timer operation mode */ #define TM_OFF 0 /* not in use */ #define TM_TRANSMIT 1 /* periodic timer to transmit */ #define TM_RX_TIMEOUT 2 /* single shot for receive timeout */ /* emulation play state */ #define EMU_IDLE 0 #define EMU_PREPARING 1 #define EMU_STOPPED 2 #define EMU_PAUSED 3 #define EMU_PLAYING 4 #define EMU_SPINUP 5 #define EMU_FF 6 #define EMU_FR 7 /****************** prototypes ******************/ void timer_init(unsigned hz, unsigned to); /* setup static timer registers and values */ void timer_set_mode(int mode); /* define for what the timer should be used right now */ void timer4_isr(void); /* IMIA4 ISR */ void transmit_isr(void); /* 2nd level ISR for M-Bus transmission */ void uart_init(unsigned baudrate); /* UART setup */ void uart_rx_isr(void) __attribute__((interrupt_handler)); /* RXI1 ISR */ void uart_err_isr(void) __attribute__((interrupt_handler)); /* ERI1 ISR */ void receive_timeout_isr(void); /* 2nd level ISR for receiver timeout */ void mbus_init(void); /* prepare the M-Bus layer */ int mbus_send(unsigned char* p_msg, int digits); /* packet send */ int mbus_receive(unsigned char* p_msg, unsigned bufsize, int timeout); /* packet receive */ unsigned char calc_checksum(unsigned char* p_msg, int digits); /* make M-Bus checksum */ bool bit_test(unsigned char* buf, unsigned bit); /* test one bit of M-Bus packet */ void bit_set(unsigned char* buf, unsigned bit, bool val); /* set/clear one bit of M-Bus packet */ void print_scroll(char* string); /* implements a scrolling screen */ void dump_packet(char* dest, int dst_size, char* src, int n); /* convert packet to ASCII */ void emu_init(void); /* init changer emulation */ void emu_process_packet(unsigned char* mbus_msg, int msg_size); /* feed a received radio packet */ void emu_tick(void); /* for regular actions of the emulator */ int get_playtime(void); /* return the current track time in seconds */ int get_tracklength(void); /* return the total length of the current track */ void set_track(int selected); int get_track(void); /* return the track number */ void set_play(void); /* start or resume playback */ void set_pause(void); /* pause playback */ void set_stop(void); /* stop playback */ void set_position(int seconds); /* seek */ void get_playmsg(void); /* update the play message with Rockbox info */ void get_diskmsg(void); /* update the disk status message with Rockbox info */ void sound_neutral(void); /* set to everything flat and 0 dB volume */ void sound_normal(void); /* return to user settings */ void thread(void); /* the thread running it all */ int main(void* parameter); /* main loop */ enum plugin_status plugin_start(struct plugin_api* api, void* parameter); /* entry */ /****************** data types ******************/ /* one entry in the receive queue */ typedef struct { unsigned char buf[MBUS_MAX_SIZE]; /* message buffer */ unsigned size; /* length of data in the buffer */ unsigned error; /* error code from reception */ } t_rcv_queue_entry; /****************** globals ******************/ /* information owned by the timer transmit ISR */ struct { unsigned char send_buf[MBUS_MAX_SIZE]; /* M-Bus message */ unsigned send_size; /* current length of data in the buffer */ unsigned index; /* index for which byte to send */ unsigned byte; /* which byte to send */ unsigned bitmask; /* which bit to send */ unsigned step; /* where in the pulse are we */ bool bit; /* currently sent bit */ bool collision; /* set if a collision happened */ bool busy; /* flag if in transmission */ } gSendIRQ; /* information owned by the UART receive ISR */ struct { t_rcv_queue_entry queue[MBUS_RCV_QUEUESIZE]; /* M-Bus message queue */ unsigned buf_read; /* readout maintained by the user application */ unsigned buf_write; /* writing maintained by ISR */ bool overflow; /* indicate queue overflow */ unsigned byte; /* currently assembled byte */ unsigned bit; /* which bit to receive */ } gRcvIRQ; /* information owned by the timer */ struct { unsigned mode; /* off, transmit, receive timout */ unsigned transmit; /* value for transmit */ unsigned timeout; /* value for receive timeout */ } gTimer; /* information owned by the changer emulation */ struct { unsigned char playmsg[15]; /* current play state msg */ unsigned char changemsg[11]; /* changing message */ unsigned char diskmsg[12]; /* disk status message */ long poll_interval; /* call the emu each n ticks */ int time; /* seconds within the song */ int set_state; /* the desired state to change into */ } gEmu; /* communication to the worker thread */ struct { struct thread_entry *id; /* Pointer of the thread */ bool foreground; /* set as long as we're owning the UI */ bool exiting; /* signal to the thread that we want to exit */ bool ended; /* response from the thread, that is has exited */ } gTread; static struct plugin_api* rb; /* here is the global API struct pointer */ /****************** implementation ******************/ /* setup static timer registers and values */ void timer_init(unsigned hz, unsigned to) { rb->memset(&gTimer, 0, sizeof(gTimer)); gTimer.transmit = TIMER_FREQ / hz; /* time for bit transitions */ gTimer.timeout = TIMER_FREQ / to; /* time for receive timeout */ } /* define for what the timer should be used right now */ void timer_set_mode(int mode) { TCNT4 = 0; /* start counting at 0 */ gTimer.mode = mode; /* store the mode */ if (mode == TM_RX_TIMEOUT) { rb->timer_register(1, NULL, gTimer.timeout, 11, timer4_isr); } else if (mode == TM_TRANSMIT) { rb->timer_register(1, NULL, gTimer.transmit, 14, timer4_isr); } else { rb->timer_unregister(); } } void timer4_isr(void) /* IMIA4 */ { switch (gTimer.mode) { /* distribute the interrupt */ case TM_TRANSMIT: transmit_isr(); break; case TM_RX_TIMEOUT: receive_timeout_isr(); rb->timer_unregister(); /* single shot */ break; default: timer_set_mode(TM_OFF); /* spurious interrupt */ } /* switch */ } /* About Alpine M-Bus * ------------------ * * The protocol uses a single wire in half duplex mode. * A bit like I2C, this wire is either pulled low or left floating high. * Bit time is ~3 ms, a "zero" is coded as ~0.6 ms low, a "one" as ~1.8 ms low. * Nice to view in a 0.6 ms grid: * * 0 0.6 1.2 1.8 2.4 3.0 * | | | | | | * __ ___________________ * \____/ \ "zero" bit * __ _________ * \______________/ \ "one" bit * * So I send out the data in a timer interrupt spawned to 0.6 ms. * In phases where the line is floating high, I can check for collisions. * (happens if the other side driving it low, too.) * * Data is transmitted in multiples of 4 bit, to ease BCD representation. */ /* 2nd level ISR for M-Bus transmission */ void transmit_isr(void) { bool exit = false; TSR4 &= ~0x01; /* clear the interrupt */ switch(gSendIRQ.step++) { case 0: and_b(~0x04, &PBDRH); /* low (read-modify-write access may have changed it while it was input) */ or_b(0x04, &PBIORH); /* drive low (output) */ break; case 1: /* 0.6 ms */ if (!gSendIRQ.bit) /* sending "zero"? */ and_b(~0x04, &PBIORH); /* float (input) */ break; case 2: /* 1.2 ms */ if (!gSendIRQ.bit && ((PBDR & PB10) == 0)) gSendIRQ.collision = true; break; case 3: /* 1.8 ms */ if (gSendIRQ.bit) /* sending "one"? */ and_b(~0x04, &PBIORH); /* float (input) */ else if ((PBDR & PB10) == 0) gSendIRQ.collision = true; break; case 4: /* 2.4 ms */ if ((PBDR & PB10) == 0) gSendIRQ.collision = true; /* prepare next round */ gSendIRQ.step = 0; gSendIRQ.bitmask >>= 1; if (gSendIRQ.bitmask) { /* new bit */ gSendIRQ.bit = (gSendIRQ.byte & gSendIRQ.bitmask) != 0; } else { /* new byte */ if (++gSendIRQ.index < gSendIRQ.send_size) { gSendIRQ.bitmask = 0x08; gSendIRQ.byte = gSendIRQ.send_buf[gSendIRQ.index]; gSendIRQ.bit = (gSendIRQ.byte & gSendIRQ.bitmask) != 0; } else exit = true; /* done */ } break; } if (exit || gSendIRQ.collision) { /* stop transmission */ or_b(0x20, PBCR1_ADDR+1); /* RxD1 again for PB10 */ timer_set_mode(TM_OFF); /* stop the timer */ gSendIRQ.busy = false; /* do this last, to avoid race conditions */ } } /* For receiving, I use the "normal" serial RX feature of the CPU, * so we can receive within an interrupt, no line polling necessary. * Luckily, the M-Bus bit always starts with a falling edge and ends with a high, * this matches with the start bit and the stop bit of a serial transmission. * The baudrate is set such that the M-Bus bit time (ca. 3ms) matches * the serial reception time of one byte, so we receive one byte per * M-Bus bit. * Start bit, 8 data bits and stop bit (total=10) nicely fall into the 5 * phases like above: * * 0 0.6 1.2 1.8 2.4 3.0 ms * | | | | | | time * __ _______________________________ * \_______/ \ "zero" bit * __ _______________ * \_______________________/ \ "one" bit * * | | | | | | | | | | | serial sampling interval * Start 0 1 2 3 4 5 6 7 Stop bit (LSB first!) * * By looking at the bit pattern in the serial byte we can distinguish * the short low from the longer low, tell "zero" and "one" apart. * So we receive 0xFE for a "zero", 0xE0 for a "one". * It may be necessary to treat the bits next to transitions as don't care, * in case the timing is not so accurate. * Bits are always sent "back-to-back", so I detect the packet end by timeout. */ void uart_init(unsigned baudrate) { RXI1 = (unsigned long)uart_rx_isr; /* install ISR */ ERI1 = (unsigned long)uart_err_isr; /* install ISR */ SCR1 = 0x00; /* disable everything; select async mode with SCK pin as I/O */ SMR1 = 0x00; /* async, 8N1, NoMultiProc, sysclock/1 */ BRR1 = ((FREQ/(32*baudrate))-1); IPRE = (IPRE & ~0xf000) | 0xc000; /* interrupt on level 12 */ rb->sleep(1); /* hardware needs to settle for at least one bit interval */ and_b(~(SCI_RDRF | SCI_ORER | SCI_FER | SCI_PER), &SSR1); /* clear any receiver flag */ or_b(SCI_RE | SCI_RIE , &SCR1); /* enable the receiver with interrupt */ } void uart_rx_isr(void) /* RXI1 */ { unsigned char data; t_rcv_queue_entry* p_entry = &gRcvIRQ.queue[gRcvIRQ.buf_write]; /* short cut */ data = RDR1; /* get data */ and_b(~SCI_RDRF, &SSR1); /* clear data received flag */ if (gTimer.mode == TM_TRANSMIT) p_entry->error = RX_OVERLAP; /* oops, we're also transmitting, stop */ else timer_set_mode(TM_RX_TIMEOUT); /* (re)spawn timeout */ if (p_entry->error != RX_BUSY) return; if ((data & ~0x00) == 0xFE) /* 01111111 in line order (reverse) */ { /* "zero" received */ gRcvIRQ.byte <<= 1; } else if ((data & ~0x00) == 0xE0) /* 00000111 in line order (reverse) */ { /* "one" received */ gRcvIRQ.byte = gRcvIRQ.byte << 1 | 0x01; } else { /* unrecognized pulse */ p_entry->error = RX_SYMBOL; } if (p_entry->error == RX_BUSY) { if (++gRcvIRQ.bit >= 4) { /* byte completed */ if (p_entry->size >= sizeof(p_entry->buf)) { p_entry->error = RX_OVERFLOW; /* buffer full */ } else { p_entry->buf[p_entry->size] = gRcvIRQ.byte; gRcvIRQ.byte = 0; gRcvIRQ.bit = 0; p_entry->size++; } } } } void uart_err_isr(void) /* ERI1 */ { t_rcv_queue_entry* p_entry = &gRcvIRQ.queue[gRcvIRQ.buf_write]; /* short cut */ if (p_entry->error == RX_BUSY) { /* terminate reception in case of error */ if (SSR1 & SCI_FER) p_entry->error = RX_FRAMING; else if (SSR1 & SCI_ORER) p_entry->error = RX_OVERRUN; else if (SSR1 & SCI_PER) p_entry->error = RX_PARITY; } /* clear any receiver flag */ and_b(~(SCI_RDRF | SCI_ORER | SCI_FER | SCI_PER), &SSR1); } /* 2nd level ISR for receiver timeout, this finalizes reception */ void receive_timeout_isr(void) { t_rcv_queue_entry* p_entry = &gRcvIRQ.queue[gRcvIRQ.buf_write]; /* short cut */ timer_set_mode(TM_OFF); /* single shot */ if (p_entry->error == RX_BUSY) /* everthing OK so far? */ p_entry->error = RX_RECEIVED; /* end with valid data */ /* move to next queue entry */ gRcvIRQ.buf_write++; if (gRcvIRQ.buf_write >= MBUS_RCV_QUEUESIZE) gRcvIRQ.buf_write = 0; p_entry = &gRcvIRQ.queue[gRcvIRQ.buf_write]; if (gRcvIRQ.buf_write == gRcvIRQ.buf_read) { /* queue overflow */ gRcvIRQ.overflow = true; /* what can I do? Continueing overwrites the oldest. */ } gRcvIRQ.byte = 0; gRcvIRQ.bit = 0; p_entry->size = 0; p_entry->error = RX_BUSY; /* enable receive on new entry */ } /* generate the checksum */ unsigned char calc_checksum(unsigned char* p_msg, int digits) { int chk = 0; int i; for (i=0; imemset(&gSendIRQ, 0, sizeof(gSendIRQ)); timer_init(MBUS_STEP_FREQ, (MBUS_BIT_FREQ*10)/15); /* setup frequency and timeout (1.5 bit) */ /* init receiver */ rb->memset(&gRcvIRQ, 0, sizeof(gRcvIRQ)); uart_init(MBUS_BAUDRATE); } /* send out a number of BCD digits (one per byte) with M-Bus protocol */ int mbus_send(unsigned char* p_msg, int digits) { /* wait for previous transmit/receive to end */ while(gTimer.mode != TM_OFF) /* wait for "free line" */ rb->sleep(1); /* fill in our part */ rb->memcpy(gSendIRQ.send_buf, p_msg, digits); /* add checksum */ gSendIRQ.send_buf[digits] = calc_checksum(p_msg, digits); digits++; /* debug dump, to be removed */ if (gTread.foreground) { char buf[MBUS_MAX_SIZE+1]; dump_packet(buf, sizeof(buf), gSendIRQ.send_buf, digits); /*print_scroll(buf); */ } gSendIRQ.send_size = digits; /* prepare everything so the ISR can start right away */ gSendIRQ.index = 0; gSendIRQ.byte = gSendIRQ.send_buf[0]; gSendIRQ.bitmask = 0x08; gSendIRQ.step = 0; gSendIRQ.bit = (gSendIRQ.byte & gSendIRQ.bitmask) != 0; gSendIRQ.collision = false; gSendIRQ.busy = true; /* last chance to wait for a new detected receive to end */ while(gTimer.mode != TM_OFF) /* wait for "free line" */ rb->sleep(1); and_b(~0x30, PBCR1_ADDR+1); /* GPIO for PB10 */ timer_set_mode(TM_TRANSMIT); /* run */ /* make the call blocking until sent out */ rb->sleep(digits*4*HZ/MBUS_BIT_FREQ); /* should take this long */ while(gSendIRQ.busy) /* poll in case it lasts longer */ rb->sleep(1); /* (should not happen) */ /* debug output, to be removed */ if (gTread.foreground) { if (gSendIRQ.collision) print_scroll("collision"); } return gSendIRQ.collision; } /* returns the size of message copy, 0 if timed out, negative on error */ int mbus_receive(unsigned char* p_msg, unsigned bufsize, int timeout) { int retval = 0; do { if (gRcvIRQ.buf_read != gRcvIRQ.buf_write) { /* something in the queue */ t_rcv_queue_entry* p_entry = &gRcvIRQ.queue[gRcvIRQ.buf_read]; /* short cut */ if (p_entry->error == RX_RECEIVED) { /* seems valid */ rb->memcpy(p_msg, p_entry->buf, MIN(p_entry->size, bufsize)); retval = p_entry->size; /* return message size */ } else { /* an error occured */ retval = - p_entry->error; /* return negative number */ } /* next queue readout position */ gRcvIRQ.buf_read++; if (gRcvIRQ.buf_read >= MBUS_RCV_QUEUESIZE) gRcvIRQ.buf_read = 0; return retval; /* exit */ } if (timeout != 0 || gTimer.mode != TM_OFF) /* also carry on if reception in progress */ { if (timeout != -1 && timeout != 0) /* if not infinite or expired */ timeout--; rb->sleep(1); /* wait a while */ } } while (timeout != 0 || gTimer.mode != TM_OFF); return 0; /* timeout */ } /****************** MMI helper fuctions ******************/ void print_scroll(char* string) { static char screen[LINES][COLUMNS+1]; /* visible strings */ static unsigned pos = 0; /* next print position */ static unsigned screentop = 0; /* for scrolling */ if (!gTread.foreground) return; /* just to protect careless callers */ if (pos >= LINES) { /* need to scroll first */ int i; rb->lcd_clear_display(); screentop++; for (i=0; ilcd_puts(0, i, screen[(i+screentop) % LINES]); pos = LINES-1; } /* no strncpy avail. */ rb->snprintf(screen[(pos+screentop) % LINES], sizeof(screen[0]), "%s", string); rb->lcd_puts(0, pos, screen[(pos+screentop) % LINES]); #ifndef HAVE_LCD_CHARCELLS rb->lcd_update(); #endif pos++; } void dump_packet(char* dest, int dst_size, char* src, int n) { int i; int len = MIN(dst_size-1, n); for (i=0; imemset(&gEmu, 0, sizeof(gEmu)); gEmu.poll_interval = HZ; /* init the play message to 990000000000000 */ gEmu.playmsg[0] = gEmu.playmsg[1] = 0x9; /* init the changing message to 9B900000001 */ gEmu.changemsg[0] = gEmu.changemsg[2] = 0x9; gEmu.changemsg[1] = 0xB; gEmu.changemsg[10] = 0x1; /* init the disk status message to 9C1019999990 */ rb->memset(&gEmu.diskmsg, 0x9, sizeof(gEmu.diskmsg)); gEmu.diskmsg[1] = 0xC; gEmu.diskmsg[2] = gEmu.diskmsg[4] = 0x1; gEmu.diskmsg[3] = gEmu.diskmsg[11] = 0x0; } /* feed a radio command into the emulator */ void emu_process_packet(unsigned char* mbus_msg, int msg_size) { bool playmsg_dirty = false; bool diskmsg_dirty = false; if (msg_size == 2 && mbus_msg[0] == 1 && mbus_msg[1] == 8) { /* 18: ping */ mbus_send("\x09\x08", 2); /* 98: ping OK */ } else if (msg_size == 5 && mbus_msg[0] == 1 && mbus_msg[1] == 1 && mbus_msg[2] == 1) { /* set play state */ if (bit_test(mbus_msg, 16)) { if (gEmu.set_state == EMU_FF || gEmu.set_state == EMU_FR) /* was seeking? */ { /* seek to final position */ set_position(gEmu.time); } else if (gEmu.set_state != EMU_PLAYING || gEmu.set_state != EMU_PAUSED) { /* was not playing yet, better send disk message */ diskmsg_dirty = true; } set_play(); gEmu.set_state = EMU_PLAYING; playmsg_dirty = true; } if (bit_test(mbus_msg, 17)) { gEmu.set_state = EMU_PAUSED; playmsg_dirty = true; set_pause(); } if (bit_test(mbus_msg, 14)) { gEmu.set_state = EMU_STOPPED; playmsg_dirty = true; set_stop(); } if (bit_test(mbus_msg, 18)) { gEmu.set_state = EMU_FF; playmsg_dirty = true; set_pause(); } if (bit_test(mbus_msg, 19)) { gEmu.set_state = EMU_FR; playmsg_dirty = true; set_pause(); } if (bit_test(mbus_msg, 12)) /* scan stop */ { bit_set(gEmu.playmsg, 51, false); playmsg_dirty = true; } if (gEmu.set_state == EMU_FF || gEmu.set_state == EMU_FR) gEmu.poll_interval = HZ/4; /* faster refresh */ else gEmu.poll_interval = HZ; } else if (msg_size == 8 && mbus_msg[0] == 1 && mbus_msg[1] == 1 && mbus_msg[2] == 4) { /* set program mode */ gEmu.playmsg[11] = mbus_msg[3]; /* copy repeat, random, intro */ gEmu.playmsg[12] = mbus_msg[4]; /* ToDo */ playmsg_dirty = true; } else if (msg_size ==8 && mbus_msg[0] == 1 && mbus_msg[1] == 1 && mbus_msg[2] == 3) { /* changing */ gEmu.time = 0; /* reset playtime */ playmsg_dirty = true; if (mbus_msg[3] == 0) { /* changing track */ if (mbus_msg[4] == 0xA && mbus_msg[5] == 0x3) { /* next random */ gEmu.playmsg[3] = rb->rand() % 10; /* ToDo */ gEmu.playmsg[4] = rb->rand() % 10; } else if (mbus_msg[4] == 0xB && mbus_msg[5] == 0x3) { /* previous random */ gEmu.playmsg[3] = rb->rand() % 10; /* ToDo */ gEmu.playmsg[4] = rb->rand() % 10; } else { /* normal track select */ set_track(mbus_msg[4]*10 + mbus_msg[5]); } } else { /* changing disk */ diskmsg_dirty = true; gEmu.changemsg[3] = mbus_msg[3]; /* copy disk */ gEmu.diskmsg[2] = mbus_msg[3]; gEmu.changemsg[7] = gEmu.playmsg[11]; /* copy flags from status */ gEmu.changemsg[8] = gEmu.playmsg[12]; /*gEmu.playmsg[3] = 0; */ /* reset to track 1 */ /*gEmu.playmsg[4] = 1; */ mbus_send(gEmu.changemsg, sizeof(gEmu.changemsg)); } } else { /* if in doubt, send Ack */ mbus_send("\x09\x0F\x00\x00\x00\x00\x00", 7); } if (playmsg_dirty) { rb->yield(); /* give the audio thread a chance to process */ get_playmsg(); /* force update */ mbus_send(gEmu.playmsg, sizeof(gEmu.playmsg)); } if (diskmsg_dirty) { get_diskmsg(); /* force update */ mbus_send(gEmu.diskmsg, sizeof(gEmu.diskmsg)); } } /* called each second in case the emulator has something to do */ void emu_tick(void) { get_playmsg(); /* force update */ if (bit_test(gEmu.playmsg, 56)) /* play bit */ { unsigned remain; /* helper as we walk down the digits */ switch(gEmu.set_state) { case EMU_FF: gEmu.time += 10; case EMU_FR: gEmu.time -= 5; if (gEmu.time < 0) gEmu.time = 0; else if (gEmu.time > get_tracklength()) gEmu.time = get_tracklength(); /* convert value to MM:SS */ remain = (unsigned)gEmu.time; gEmu.playmsg[7] = remain / (10*60); remain -= gEmu.playmsg[7] * (10*60); gEmu.playmsg[8] = remain / 60; remain -= gEmu.playmsg[8] * 60; gEmu.playmsg[9] = remain / 10; remain -= gEmu.playmsg[9] * 10; gEmu.playmsg[10] = remain; } mbus_send(gEmu.playmsg, sizeof(gEmu.playmsg)); } } /****************** communication with Rockbox playback ******************/ /* update the play message with Rockbox info */ void get_playmsg(void) { int track, time; if (gEmu.set_state != EMU_FF && gEmu.set_state != EMU_FR) { switch(rb->audio_status()) { case AUDIO_STATUS_PLAY: print_scroll("AudioStat Play"); if (gEmu.set_state == EMU_FF || gEmu.set_state == EMU_FR) gEmu.playmsg[2] = gEmu.set_state; /* set FF/FR */ else gEmu.playmsg[2] = EMU_PLAYING; /* set normal play */ bit_set(gEmu.playmsg, 56, true); /* set play */ bit_set(gEmu.playmsg, 57, false); /* clear pause */ bit_set(gEmu.playmsg, 59, false); /* clear stop */ break; case AUDIO_STATUS_PLAY | AUDIO_STATUS_PAUSE: print_scroll("AudioStat Pause"); gEmu.playmsg[2] = EMU_PAUSED; bit_set(gEmu.playmsg, 56, false); /* clear play */ bit_set(gEmu.playmsg, 57, true); /* set pause */ bit_set(gEmu.playmsg, 59, false); /* clear stop */ break; default: print_scroll("AudioStat 0"); gEmu.playmsg[2] = EMU_STOPPED; bit_set(gEmu.playmsg, 56, false); /* clear play */ bit_set(gEmu.playmsg, 57, false); /* clear pause */ bit_set(gEmu.playmsg, 59, true); /* set stop */ break; } /* convert value to MM:SS */ time = get_playtime(); gEmu.time = time; /* copy it */ gEmu.playmsg[7] = time / (10*60); time -= gEmu.playmsg[7] * (10*60); gEmu.playmsg[8] = time / 60; time -= gEmu.playmsg[8] * 60; gEmu.playmsg[9] = time / 10; time -= gEmu.playmsg[9] * 10; gEmu.playmsg[10] = time; } else /* FF/FR */ { gEmu.playmsg[2] = gEmu.set_state; /* in FF/FR, report that instead */ } track = get_track(); gEmu.playmsg[3] = track / 10; gEmu.playmsg[4] = track % 10; } /* update the disk status message with Rockbox info */ void get_diskmsg(void) { int tracks = rb->playlist_amount(); if (tracks > 99) tracks = 99; gEmu.diskmsg[5] = tracks / 10; gEmu.diskmsg[6] = tracks % 10; } /* return the current track time in seconds */ int get_playtime(void) { struct mp3entry* p_mp3entry; p_mp3entry = rb->audio_current_track(); if (p_mp3entry == NULL) return 0; return p_mp3entry->elapsed / 1000; } /* return the total length of the current track */ int get_tracklength(void) { struct mp3entry* p_mp3entry; p_mp3entry = rb->audio_current_track(); if (p_mp3entry == NULL) return 0; return p_mp3entry->length / 1000; } /* change to a new track */ void set_track(int selected) { if (selected > get_track()) { print_scroll("audio_next"); rb->audio_next(); } else if (selected < get_track()) { print_scroll("audio_prev"); rb->audio_prev(); } } /* return the track number */ int get_track(void) { struct mp3entry* p_mp3entry; p_mp3entry = rb->audio_current_track(); if (p_mp3entry == NULL) return 0; return p_mp3entry->index + 1; /* track numbers start with 1 */ } /* start or resume playback */ void set_play(void) { if (rb->audio_status() == AUDIO_STATUS_PLAY) return; if (rb->audio_status() == (AUDIO_STATUS_PLAY | AUDIO_STATUS_PAUSE)) { print_scroll("audio_resume"); rb->audio_resume(); } else { print_scroll("audio_play(0)"); rb->audio_play(0); } } /* pause playback */ void set_pause(void) { if (rb->audio_status() == AUDIO_STATUS_PLAY) { print_scroll("audio_pause"); rb->audio_pause(); } } /* stop playback */ void set_stop(void) { if (rb->audio_status() & AUDIO_STATUS_PLAY) { print_scroll("audio_stop"); rb->audio_stop(); } } /* seek */ void set_position(int seconds) { if (rb->audio_status() & AUDIO_STATUS_PLAY) { print_scroll("audio_ff_rewind"); rb->audio_ff_rewind(seconds * 1000); } } /****************** main thread + helper ******************/ /* set to everything flat and 0 dB volume */ void sound_neutral(void) { /* neutral sound settings */ rb->sound_set(SOUND_BASS, 0); rb->sound_set(SOUND_TREBLE, 0); rb->sound_set(SOUND_BALANCE, 0); rb->sound_set(SOUND_VOLUME, 0); #if (CONFIG_CODEC == MAS3587F) || (CONFIG_CODEC == MAS3539F) rb->sound_set(SOUND_LOUDNESS, 0); rb->sound_set(SOUND_SUPERBASS, 0); rb->sound_set(SOUND_AVC, 0); #endif } /* return to user settings */ void sound_normal(void) { /* restore sound settings */ rb->sound_set(SOUND_BASS, rb->global_settings->bass); rb->sound_set(SOUND_TREBLE, rb->global_settings->treble); rb->sound_set(SOUND_BALANCE, rb->global_settings->balance); rb->sound_set(SOUND_VOLUME, rb->global_settings->volume); #if (CONFIG_CODEC == MAS3587F) || (CONFIG_CODEC == MAS3539F) rb->sound_set(SOUND_LOUDNESS, rb->global_settings->loudness); rb->sound_set(SOUND_SUPERBASS, rb->global_settings->superbass); rb->sound_set(SOUND_AVC, rb->global_settings->avc); #endif } /* the thread running it all */ void thread(void) { int msg_size; unsigned char mbus_msg[MBUS_MAX_SIZE]; char buf[32]; bool connected = false; long last_tick = *rb->current_tick; /* for 1 sec tick */ do { msg_size = mbus_receive(mbus_msg, sizeof(mbus_msg), 1); if (msg_size > 0) { /* received something */ if(gTread.foreground) { dump_packet(buf, sizeof(buf), mbus_msg, msg_size); /*print_scroll(buf); */ } if (msg_size > 2 && mbus_msg[0] == 1 && mbus_msg[msg_size-1] == calc_checksum(mbus_msg, msg_size-1)) { /* sanity and checksum OK */ if (!connected) { /* with the first received packet: */ sound_neutral(); /* set to flat and 0dB volume */ connected = true; } emu_process_packet(mbus_msg, msg_size-1); /* pass without chksum */ } else if(gTread.foreground) { /* not OK */ print_scroll("bad packet"); } } else if (msg_size < 0 && gTread.foreground) { /* error */ rb->snprintf(buf, sizeof(buf), "rcv error %d", msg_size); print_scroll(buf); } if (*rb->current_tick - last_tick >= gEmu.poll_interval) { /* call the emulation regulary */ emu_tick(); last_tick += gEmu.poll_interval; } } while (!gTread.exiting); gTread.ended = true; /* acknowledge the exit */ rb->remove_thread(gTread.id); /* commit suicide */ rb->yield(); /* pass control to other threads, we won't return */ } /* callback to end the TSR plugin, called before a new one gets loaded */ bool exit_tsr(bool reenter) { if (reenter) return false; /* dont let it start again */ gTread.exiting = true; /* tell the thread to end */ while (!gTread.ended) /* wait until it did */ rb->yield(); uart_init(BAUDRATE); /* return to standard baudrate */ IPRE = (IPRE & ~0xF000); /* UART interrupt off */ timer_set_mode(TM_OFF); /* timer interrupt off */ sound_normal(); /* restore sound settings */ return true; } /****************** main ******************/ int main(void* parameter) { (void)parameter; #ifdef DEBUG int button; #endif int stacksize; void* stack; mbus_init(); /* init the M-Bus layer */ emu_init(); /* init emulator */ rb->splash(HZ/5, true, "Alpine CDC"); /* be quick on autostart */ #ifdef DEBUG print_scroll("Alpine M-Bus Test"); print_scroll("any key to TSR"); #endif /* init the worker thread */ stack = rb->plugin_get_buffer(&stacksize); /* use the rest as stack */ stack = (void*)(((unsigned int)stack + 100) & ~3); /* a bit away, 32 bit align */ stacksize = (stacksize - 100) & ~3; if (stacksize < DEFAULT_STACK_SIZE) { rb->splash(HZ*2, true, "Out of memory"); return -1; } rb->memset(&gTread, 0, sizeof(gTread)); gTread.foreground = true; gTread.id = rb->create_thread(thread, stack, stacksize, "CDC" IF_PRIO(, PRIORITY_BACKGROUND)); #ifdef DEBUG do { button = rb->button_get(true); } while (button & BUTTON_REL); #endif gTread.foreground = false; /* we're in the background now */ rb->plugin_tsr(exit_tsr); /* stay resident */ #ifdef DEBUG return rb->default_event_handler(button); #else return 0; #endif } /***************** Plugin Entry Point *****************/ enum plugin_status plugin_start(struct plugin_api* api, void* parameter) { rb = api; /* copy to global api pointer */ /* now go ahead and have fun! */ return (main(parameter)==0) ? PLUGIN_OK : PLUGIN_ERROR; } #endif /* #ifndef SIMULATOR, etc. */