/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2002 by Daniel Stenberg * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ /* * Rockbox button functions */ #include #include "config.h" #include "system.h" #include "button.h" #include "kernel.h" #include "thread.h" #include "backlight.h" #include "serial.h" #include "power.h" #include "powermgmt.h" #include "button-target.h" #ifdef HAVE_REMOTE_LCD #include "lcd-remote.h" #endif #ifndef SIMULATOR #if 0 /* Older than MAX_EVENT_AGE button events are going to be ignored. * Used to prevent for example volume going up uncontrollable when events * are getting queued and UI is lagging too much. */ #define MAX_EVENT_AGE HZ #endif struct event_queue button_queue; static long lastbtn; /* Last valid button status */ static long last_read; /* Last button status, for debouncing/filtering */ static intptr_t button_data; /* data value from last message dequeued */ #ifdef HAVE_LCD_BITMAP static bool flipped; /* buttons can be flipped to match the LCD flip */ #endif #ifdef HAVE_BACKLIGHT static bool filter_first_keypress; #ifdef HAVE_REMOTE_LCD static bool remote_filter_first_keypress; #endif #endif /* HAVE_BACKLIGHT */ #ifdef HAVE_HEADPHONE_DETECTION static bool phones_present = false; #endif /* how long until repeat kicks in, in ticks */ #define REPEAT_START 30 /* the speed repeat starts at, in ticks */ #define REPEAT_INTERVAL_START 16 /* speed repeat finishes at, in ticks */ #define REPEAT_INTERVAL_FINISH 5 #ifdef HAVE_BUTTON_DATA static int button_read(int *data); #else static int button_read(void); #endif #ifdef HAVE_TOUCHSCREEN int last_touchscreen_touch; #endif #if defined(HAVE_HEADPHONE_DETECTION) static struct timeout hp_detect_timeout; /* Debouncer for headphone plug/unplug */ /* This callback can be used for many different functions if needed - just check to which object tmo points */ static int btn_detect_callback(struct timeout *tmo) { /* Try to post only transistions */ const long id = tmo->data ? SYS_PHONE_PLUGGED : SYS_PHONE_UNPLUGGED; queue_remove_from_head(&button_queue, id); queue_post(&button_queue, id, 0); return 0; } #endif static void button_tick(void) { static int count = 0; static int repeat_speed = REPEAT_INTERVAL_START; static int repeat_count = 0; static bool repeat = false; static bool post = false; #ifdef HAVE_BACKLIGHT static bool skip_release = false; #ifdef HAVE_REMOTE_LCD static bool skip_remote_release = false; #endif #endif int diff; int btn; #ifdef HAVE_BUTTON_DATA int data = 0; #else const int data = 0; #endif #ifdef HAS_SERIAL_REMOTE /* Post events for the remote control */ btn = remote_control_rx(); if(btn) { queue_post(&button_queue, btn, 0); } #endif #ifdef HAVE_BUTTON_DATA btn = button_read(&data); #else btn = button_read(); #endif #if defined(HAVE_HEADPHONE_DETECTION) if (headphones_inserted() != phones_present) { /* Use the autoresetting oneshot to debounce the detection signal */ phones_present = !phones_present; timeout_register(&hp_detect_timeout, btn_detect_callback, HZ, phones_present); } #endif /* Find out if a key has been released */ diff = btn ^ lastbtn; if(diff && (btn & diff) == 0) { #ifdef HAVE_BACKLIGHT #ifdef HAVE_REMOTE_LCD if(diff & BUTTON_REMOTE) if(!skip_remote_release) queue_post(&button_queue, BUTTON_REL | diff, data); else skip_remote_release = false; else #endif if(!skip_release) queue_post(&button_queue, BUTTON_REL | diff, data); else skip_release = false; #else queue_post(&button_queue, BUTTON_REL | diff, data); #endif } else { if ( btn ) { /* normal keypress */ if ( btn != lastbtn ) { post = true; repeat = false; repeat_speed = REPEAT_INTERVAL_START; } else /* repeat? */ { if ( repeat ) { if (!post) count--; if (count == 0) { post = true; /* yes we have repeat */ if (repeat_speed > REPEAT_INTERVAL_FINISH) repeat_speed--; count = repeat_speed; repeat_count++; /* Send a SYS_POWEROFF event if we have a device which doesn't shut down easily with the OFF key */ #ifdef HAVE_SW_POWEROFF if ((btn == POWEROFF_BUTTON #ifdef RC_POWEROFF_BUTTON || btn == RC_POWEROFF_BUTTON #endif ) && #if CONFIG_CHARGING && !defined(HAVE_POWEROFF_WHILE_CHARGING) !charger_inserted() && #endif repeat_count > POWEROFF_COUNT) { /* Tell the main thread that it's time to power off */ sys_poweroff(); /* Safety net for players without hardware poweroff */ if(repeat_count > POWEROFF_COUNT * 10) power_off(); } #endif } } else { if (count++ > REPEAT_START) { post = true; repeat = true; repeat_count = 0; /* initial repeat */ count = REPEAT_INTERVAL_START; } } } if ( post ) { if (repeat) { /* Only post repeat events if the queue is empty, * to avoid afterscroll effects. */ if (queue_empty(&button_queue)) { queue_post(&button_queue, BUTTON_REPEAT | btn, data); #ifdef HAVE_BACKLIGHT #ifdef HAVE_REMOTE_LCD skip_remote_release = false; #endif skip_release = false; #endif post = false; } } else { #ifdef HAVE_BACKLIGHT #ifdef HAVE_REMOTE_LCD if (btn & BUTTON_REMOTE) { if (!remote_filter_first_keypress || is_remote_backlight_on(false) #if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES) || (remote_type()==REMOTETYPE_H300_NONLCD) #endif ) queue_post(&button_queue, btn, data); else skip_remote_release = true; } else #endif if (!filter_first_keypress || is_backlight_on(false) #if BUTTON_REMOTE || (btn & BUTTON_REMOTE) #endif ) queue_post(&button_queue, btn, data); else skip_release = true; #else /* no backlight, nothing to skip */ queue_post(&button_queue, btn, data); #endif post = false; } #ifdef HAVE_REMOTE_LCD if(btn & BUTTON_REMOTE) remote_backlight_on(); else #endif { backlight_on(); #ifdef HAVE_BUTTON_LIGHT buttonlight_on(); #endif } reset_poweroff_timer(); } } else { repeat = false; count = 0; } } lastbtn = btn & ~(BUTTON_REL | BUTTON_REPEAT); } #ifdef HAVE_ADJUSTABLE_CPU_FREQ static void button_boost(bool state) { static bool boosted = false; if (state && !boosted) { cpu_boost(true); boosted = true; } else if (!state && boosted) { cpu_boost(false); boosted = false; } } #endif /* HAVE_ADJUSTABLE_CPU_FREQ */ int button_queue_count( void ) { return queue_count(&button_queue); } long button_get(bool block) { struct queue_event ev; int pending_count = queue_count(&button_queue); #ifdef HAVE_ADJUSTABLE_CPU_FREQ /* Control the CPU boost trying to keep queue empty. */ if (pending_count == 0) button_boost(false); else if (pending_count > 2) button_boost(true); #endif if ( block || pending_count ) { queue_wait(&button_queue, &ev); #if 0 /* Ignore if the event was too old and for simplicity, just * wait for a new button_get() request. */ if (current_tick - ev.tick > MAX_EVENT_AGE) return BUTTON_NONE; #endif button_data = ev.data; return ev.id; } return BUTTON_NONE; } long button_get_w_tmo(int ticks) { struct queue_event ev; #ifdef HAVE_ADJUSTABLE_CPU_FREQ /* Be sure to keep boosted state. */ if (!queue_empty(&button_queue)) return button_get(true); button_boost(false); #endif queue_wait_w_tmo(&button_queue, &ev, ticks); if (ev.id == SYS_TIMEOUT) ev.id = BUTTON_NONE; else button_data = ev.data; return ev.id; } intptr_t button_get_data(void) { return button_data; } void button_init(void) { /* Init used objects first */ queue_init(&button_queue, true); #ifdef HAVE_BUTTON_DATA int temp; #endif /* hardware inits */ button_init_device(); #ifdef HAVE_BUTTON_DATA button_read(&temp); lastbtn = button_read(&temp); #else button_read(); lastbtn = button_read(); #endif reset_poweroff_timer(); #ifdef HAVE_LCD_BITMAP flipped = false; #endif #ifdef HAVE_BACKLIGHT filter_first_keypress = false; #ifdef HAVE_REMOTE_LCD remote_filter_first_keypress = false; #endif #endif #ifdef HAVE_TOUCHSCREEN last_touchscreen_touch = 0xffff; #endif /* Start polling last */ tick_add_task(button_tick); } #ifdef BUTTON_DRIVER_CLOSE void button_close(void) { tick_remove_task(button_tick); } #endif /* BUTTON_DRIVER_CLOSE */ #ifdef HAVE_LCD_BITMAP /* only bitmap displays can be flipped */ /* * helper function to swap LEFT/RIGHT, UP/DOWN (if present), and F1/F3 (Recorder) */ static int button_flip(int button) { int newbutton; newbutton = button & ~(BUTTON_LEFT | BUTTON_RIGHT #if defined(BUTTON_UP) && defined(BUTTON_DOWN) | BUTTON_UP | BUTTON_DOWN #endif #if defined(BUTTON_SCROLL_BACK) && defined(BUTTON_SCROLL_FWD) | BUTTON_SCROLL_BACK | BUTTON_SCROLL_FWD #endif #if CONFIG_KEYPAD == RECORDER_PAD | BUTTON_F1 | BUTTON_F3 #endif #if CONFIG_KEYPAD == SANSA_C200_PAD | BUTTON_VOL_UP | BUTTON_VOL_DOWN #endif ); if (button & BUTTON_LEFT) newbutton |= BUTTON_RIGHT; if (button & BUTTON_RIGHT) newbutton |= BUTTON_LEFT; #if defined(BUTTON_UP) && defined(BUTTON_DOWN) if (button & BUTTON_UP) newbutton |= BUTTON_DOWN; if (button & BUTTON_DOWN) newbutton |= BUTTON_UP; #endif #if defined(BUTTON_SCROLL_BACK) && defined(BUTTON_SCROLL_FWD) if (button & BUTTON_SCROLL_BACK) newbutton |= BUTTON_SCROLL_FWD; if (button & BUTTON_SCROLL_FWD) newbutton |= BUTTON_SCROLL_BACK; #endif #if CONFIG_KEYPAD == RECORDER_PAD if (button & BUTTON_F1) newbutton |= BUTTON_F3; if (button & BUTTON_F3) newbutton |= BUTTON_F1; #endif #if CONFIG_KEYPAD == SANSA_C200_PAD if (button & BUTTON_VOL_UP) newbutton |= BUTTON_VOL_DOWN; if (button & BUTTON_VOL_DOWN) newbutton |= BUTTON_VOL_UP; #endif return newbutton; } /* * set the flip attribute * better only call this when the queue is empty */ void button_set_flip(bool flip) { if (flip != flipped) /* not the current setting */ { /* avoid race condition with the button_tick() */ int oldlevel = disable_irq_save(); lastbtn = button_flip(lastbtn); flipped = flip; restore_irq(oldlevel); } } #endif /* HAVE_LCD_BITMAP */ #ifdef HAVE_BACKLIGHT void set_backlight_filter_keypress(bool value) { filter_first_keypress = value; } #ifdef HAVE_REMOTE_LCD void set_remote_backlight_filter_keypress(bool value) { remote_filter_first_keypress = value; } #endif #endif /* * Get button pressed from hardware */ #ifdef HAVE_BUTTON_DATA static int button_read(int *data) { int btn = button_read_device(data); #else static int button_read(void) { int btn = button_read_device(); #endif int retval; #ifdef HAVE_LCD_BITMAP if (btn && flipped) btn = button_flip(btn); /* swap upside down */ #endif #ifdef HAVE_TOUCHSCREEN if (btn & BUTTON_TOUCHSCREEN) last_touchscreen_touch = current_tick; #endif /* Filter the button status. It is only accepted if we get the same status twice in a row. */ #ifndef HAVE_TOUCHSCREEN if (btn != last_read) retval = lastbtn; else #endif retval = btn; last_read = btn; return retval; } int button_status(void) { return lastbtn; } void button_clear_queue(void) { queue_clear(&button_queue); } #ifdef HAVE_TOUCHSCREEN int touchscreen_last_touch(void) { return last_touchscreen_touch; } #endif #endif /* SIMULATOR */ #ifdef HAVE_WHEEL_ACCELERATION /* WHEEL_ACCEL_FACTOR = 2^16 / WHEEL_ACCEL_START */ #define WHEEL_ACCEL_FACTOR (1<<16)/WHEEL_ACCEL_START /** * data: * [31] Use acceleration * [30:24] Message post count (skipped + 1) (1-127) * [23:0] Velocity - degree/sec * * WHEEL_ACCEL_FACTOR: * Value in degree/sec -- configurable via settings -- above which * the accelerated scrolling starts. Factor is internally scaled by * 1<<16 in respect to the following 32bit integer operations. */ int button_apply_acceleration(const unsigned int data) { int delta = (data >> 24) & 0x7f; if ((data & (1 << 31)) != 0) { /* read driver's velocity from data */ unsigned int v = data & 0xffffff; /* v = 28.4 fixed point */ v = (WHEEL_ACCEL_FACTOR * v)>>(16-4); /* Calculate real numbers item to scroll based upon acceleration * setting, use correct roundoff */ #if (WHEEL_ACCELERATION == 1) v = (v*v + (1<< 7))>> 8; #elif (WHEEL_ACCELERATION == 2) v = (v*v*v + (1<<11))>>12; #elif (WHEEL_ACCELERATION == 3) v = (v*v*v*v + (1<<15))>>16; #endif if (v > 1) delta *= v; } return delta; } #endif /* HAVE_WHEEL_ACCELERATION */