/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2006 by Linus Nielsen Feltzing * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "cpu.h" #include "kernel.h" #include "system.h" #include "power.h" #include "timer.h" /* Settings for all possible clock frequencies (with properly working timers) * NOTE: Some 5249 chips don't like having PLLDIV set to 0. We must avoid that! * * xxx_REFRESH_TIMER below * system.h, CPUFREQ_xxx_MULT | * | | * V V * PLLCR & Rftim. IDECONFIG1/IDECONFIG2 * CPUCLK/Hz MULT ~0x70400000 16MB CSCR0 CS2Pre CS2Post CS2Wait * ----------------------------------------------------------------- * 11289600 1 0x00800200 4 0x0180 1 1 0 * 22579200 2 0x0589e025 10 0x0180 1 1 0 * 33868800 3 0x0388e025 15 0x0180 1 1 0 * 45158400 4 0x0589e021 21 0x0580 1 1 0 * 56448000 5 0x0289e025 26 0x0580 2 1 0 * 67737600 6 0x0388e021 32 0x0980 2 1 0 * 79027200 7 0x038a6021 37 0x0980 2 1 0 * 90316800 8 0x038be021 43 0x0d80 2 1 0 * 101606400 9 0x01892025 48 0x0d80 2 1 0 * 112896000 10 0x0189e025 54 0x1180 3 1 0 * 124185600 11 0x018ae025 59 0x1180 3 1 1 */ #define MAX_REFRESH_TIMER 59 #define NORMAL_REFRESH_TIMER 21 #define DEFAULT_REFRESH_TIMER 4 #ifdef HAVE_ADJUSTABLE_CPU_FREQ void set_cpu_frequency (long) __attribute__ ((section (".icode"))); void set_cpu_frequency(long frequency) #else void cf_set_cpu_frequency (long) __attribute__ ((section (".icode"))); void cf_set_cpu_frequency(long frequency) #endif { switch(frequency) { case CPUFREQ_MAX: DCR = (0x8200 | DEFAULT_REFRESH_TIMER); /* Refresh timer for bypass frequency */ PLLCR &= ~1; /* Bypass mode */ timers_adjust_prescale(CPUFREQ_DEFAULT_MULT, false); PLLCR = 0x018ae025 | (PLLCR & 0x70400000); CSCR0 = 0x00001180; /* Flash: 4 wait states */ while(!(PLLCR & 0x80000000)) {}; /* Wait until the PLL has locked. This may take up to 10ms! */ timers_adjust_prescale(CPUFREQ_MAX_MULT, true); DCR = (0x8200 | MAX_REFRESH_TIMER); /* Refresh timer */ cpu_frequency = CPUFREQ_MAX; IDECONFIG1 = 0x100000 | (1 << 13) | (3 << 10); /* SBUFEN2 enable | CS2Post | CS2Pre */ IDECONFIG2 = 0x40000 | (1 << 8); /* TA enable + CS2wait */ break; case CPUFREQ_NORMAL: DCR = (DCR & ~0x01ff) | DEFAULT_REFRESH_TIMER; /* Refresh timer for bypass frequency */ PLLCR &= ~1; /* Bypass mode */ timers_adjust_prescale(CPUFREQ_DEFAULT_MULT, false); PLLCR = 0x0589e021 | (PLLCR & 0x70400000); CSCR0 = 0x00000580; /* Flash: 1 wait state */ while(!(PLLCR & 0x80000000)) {}; /* Wait until the PLL has locked. This may take up to 10ms! */ timers_adjust_prescale(CPUFREQ_NORMAL_MULT, true); DCR = (0x8000 | NORMAL_REFRESH_TIMER); /* Refresh timer */ cpu_frequency = CPUFREQ_NORMAL; IDECONFIG1 = 0x100000 | (1 << 13) | (1 << 10); /* BUFEN2 enable | CS2Post | CS2Pre */ IDECONFIG2 = 0x40000 | (0 << 8); /* TA enable + CS2wait */ break; default: DCR = (DCR & ~0x01ff) | DEFAULT_REFRESH_TIMER; /* Refresh timer for bypass frequency */ PLLCR &= ~1; /* Bypass mode */ timers_adjust_prescale(CPUFREQ_DEFAULT_MULT, true); /* Power down PLL, but keep CRSEL and CLSEL */ PLLCR = 0x00800200 | (PLLCR & 0x70400000); CSCR0 = 0x00000180; /* Flash: 0 wait states */ DCR = (0x8000 | DEFAULT_REFRESH_TIMER); /* Refresh timer */ cpu_frequency = CPUFREQ_DEFAULT; IDECONFIG1 = 0x100000 | (1 << 13) | (1 << 10); /* BUFEN2 enable | CS2Post | CS2Pre */ IDECONFIG2 = 0x40000 | (0 << 8); /* TA enable + CS2wait */ break; } }