/* * This config file is for the Tatung Elio TPJ-1022 */ #define TARGET_TREE /* this target is using the target tree system */ #define MODEL_NAME "Tatung Elio TPJ-1022" /* For Rolo and boot loader */ #define MODEL_NUMBER 15 /* define this if you use an ATA controller */ #define CONFIG_STORAGE STORAGE_ATA /* define this if you have recording possibility */ /*#define HAVE_RECORDING*/ /* TODO: add support for this */ /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \ SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) /* define the bitmask of recording sample rates #define REC_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \ SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */ /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you have access to the pitchscreen */ #define HAVE_PITCHSCREEN /* LCD dimensions */ #define LCD_WIDTH 220 #define LCD_HEIGHT 176 #define LCD_DEPTH 16 /* 65536 colours */ #define LCD_PIXELFORMAT RGB565 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */ #define CONFIG_KEYPAD TATUNG_TPJ1022_PAD /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* define this if you have a real-time clock */ #ifndef BOOTLOADER //#define CONFIG_RTC RTC_E8564 #endif /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 /* Define this if you have the WM8731 audio codec */ #define HAVE_WM8731 #define AB_REPEAT_ENABLE 1 /* define this if you have a disk storage, i.e. something that needs spinups and can cause skips when shaked */ #define HAVE_DISK_STORAGE /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity TODO: check this, probably different for different models too */ #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 10 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ /* Hardware controlled charging? FIXME */ #define CONFIG_CHARGING CHARGING_SIMPLE /* define this if the unit can be powered or charged via USB */ /*#define HAVE_USB_POWER*/ /* Define this if you have a PortalPlayer PP5020 */ #define CONFIG_CPU PP5020 /* Define this if you want to use the PP5020 i2c interface */ #define CONFIG_I2C I2C_PP5020 /* define this if the hardware can be powered off while charging */ /* TODO: should this be set for the H10? */ //#define HAVE_POWEROFF_WHILE_CHARGING /* The start address index for ROM builds */ #define ROM_START 0x00000000 /* Define this to the CPU frequency */ /* TODO: this is probably wrong */ #define CPU_FREQ 11289600 /* Type of LCD */ #define CONFIG_LCD LCD_TPJ1022 #define DEFAULT_CONTRAST_SETTING 19 /* Offset ( in the firmware file's header ) to the file length */ #define FIRMWARE_OFFSET_FILE_LENGTH 0 /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_ARC /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* enable these for the experimental usb stack ROOLKU */ #define HAVE_USBSTACK #define USB_VENDOR_ID 0x07B4 #define USB_PRODUCT_ID 0x0280 /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ #define BOOTFILE_EXT "elio" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ #define HAVE_ATA_DMA /* Define this if a programmable hotkey is mapped */ //#define HAVE_HOTKEY