/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2010 by Karl Kurbjun * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "cpu.h" #define CACHE_NONE 0 #define CACHE_ALL 0x0C #define BUFFERED 0x04 #define LONG_VECTORS 1 /****************************************************************************** * vectors: * * This is the ARM vector table * * Long call exception handlers are used for simplicity between flash * * bootloader and SDRAM main-application. These need to be copied to address * * 0x0 at start. * ******************************************************************************/ .section .vectors,"ax" .code 32 .global _vectors @entry: _vectors: #if defined(SHORT_VECTORS) /* Use relative branch vectors (64 MB limit) */ b _start /* Reset Vector */ b undef_instr_handler /* Undefined instruction */ b software_int_handler /* Software Vector */ b prefetch_abort_handler /* Prefetch Abort */ b data_abort_handler /* Data Abort */ b reserved_handler /* Reserved/Unused */ b irq_handler /* IRQ vector */ b fiq_handler /* FIQ vector */ #else #if defined(LONG_VECTORS) /* Load the PC with the word values stored below */ ldr pc, [pc, #0x18] /* Reset */ ldr pc, [pc, #0x18] /* Undefined instruction */ ldr pc, [pc, #0x18] /* Software interrupt */ ldr pc, [pc, #0x18] /* Prefetch Abort */ ldr pc, [pc, #0x18] /* Data Abort */ ldr pc, [pc, #0x18] /* Reserved/Unused */ ldr pc, [pc, #0x18] /* IRQ */ ldr pc, [pc, #0x18] /* FIQ */ /* Addresses of the handlers */ .word _start .word undef_instr_handler .word software_int_handler .word prefetch_abort_handler .word data_abort_handler .word reserved_handler .word irq_handler .word fiq_handler #else #error Vector type undefined #endif #endif /****************************************************************************** * _start: * * This is the main entry point to the program * ******************************************************************************/ .section .init, "ax" .code 32 .align 0x04 .global _start _start: /* Go into supervisor state with IRQ's disabled. * This register is described in section "A2.5 Program status registers" * of the "ARM Architecture Reference Manual". */ msr cpsr, #0xd3 /* Disable all the fancy stuff */ mov r0, #0 mcr p15, 0, r0, c1, c0, 0 /* Disable data and instruction cache, high vectors (at 0xffff0000 instead * of 0x00000000) */ mrc p15, 0, r0, c1, c0, 0 /* clear bits 13, 9:8 (--VI --RS) */ bic r0, r0, #0x00003300 /* clear bits 7, 2:0 (B--- -C-M) */ bic r0, r0, #0x00000085 /* make sure bit 2 (A) Align is set */ orr r0, r0, #0x00000002 mcr p15, 0, r0, c1, c0, 0 /* Add a few cycles of delay before continuing due to system requirements */ mov r0, #0x20 bl _delay_cycles #if defined(BOOTLOADER) && !defined(CREATIVE_ZVx) bl _init_board #endif /* Copy exception handler code to address 0 */ ldr r0, =_vectorscopy ldr r1, =_vectorsstart ldr r2, =_vectorsend bl _copy_section #if !defined(SANSA_CONNECT) /* Add some delay time to make sure JTAG can be accessed cleanly */ mov r0, #0x100000 bl _delay_cycles #endif #if defined(BOOTLOADER) /* Copy the DRAM */ ldr r0, =_dramcopy ldr r1, =_dramstart ldr r2, =_dramend bl _copy_section #endif /* Zero out the IBSS */ mov r0, #0 ldr r1, =_ibss_start ldr r2, =_ibss_end bl _init_section /* Copy the IRAM */ ldr r0, =_iramcopy ldr r1, =_iramstart ldr r2, =_iramend bl _copy_section /* Zero out the BSS */ mov r0, #0 ldr r1, =_bss_start ldr r2, =_bss_end bl _init_section /* Initialize fiq stack */ ldr r0, =0xDEADBEEF ldr r1, =_fiq_stack_end /* Stack counts backwards, so end is first*/ ldr r2, =_fiq_stack_start bl _init_section msr cpsr_c, #0xd1 /* Go into fiq state */ ldr sp, =_fiq_stack_start /* set the fiq stack pointer */ /* Initialize irq stack */ ldr r0, =0xDEADBEEF /* Can be taken out; left for clarity */ ldr r1, =_irq_stack_end /* Stack counts backwards, so end is first*/ ldr r2, =_irq_stack_start bl _init_section msr cpsr_c, #0xd2 /* Go into irq state */ ldr sp, =_irq_stack_start /* set the irq stack pointer */ /* SVC, ABT, UNDEF share irq stack */ msr cpsr_c, #0xd3 /* Go into svc state */ ldr sp, =_irq_stack_start /* set svc stack pointer */ msr cpsr_c, #0xd7 /* Go into abort state */ ldr sp, =_irq_stack_start /* set the stack pointer */ msr cpsr_c, #0xdb /* Go into undefined state */ ldr sp, =_irq_stack_start /* set the stack pointer */ /* Initialize program stack */ msr cpsr_c, #0xdf /* Go into sys state */ ldr r0, =0xDEADBEEF /* Can be taken out; left for clarity */ ldr r1, =_pro_stack_end /* Stack counts backwards, so end is first*/ ldr r2, =_pro_stack_start bl _init_section ldr sp, =_pro_stack_start /* set the sys stack pointer */ /* MMU initialization */ bl ttb_init /* Make sure everything is mapped on itself */ ldr r0, =0x0 ldr r1, =0x0 ldr r2, =0x1000 mov r3, #CACHE_NONE bl map_section /* Enable caching for FLASH */ ldr r0, =_flash_start ldr r1, =_flash_start ldr r2, =_flash_sizem mov r3, #CACHE_ALL bl map_section /* Enable caching for RAM */ ldr r0, =_sdram_start ldr r1, =_sdram_start ldr r2, =_sdram_sizem mov r3, #CACHE_ALL bl map_section bl enable_mmu /* Initial setup is complete, go into main */ ldr pc, =main /* If main returns go into an infinite loop */ b _dead_loop /* Constants go here (from _start - .ltorg): */ .ltorg /****************************************************************************** * _init_section: * * This function initializes a section with the 32-bit value specified. * ******************************************************************************/ .section .init, "ax" .code 32 .align 0x04 .global _init_section .type _init_section, %function /* r0 = init value * r1 = start location * r2 = end location */ /* This function will not run if end is less than or equal to start */ _init_section: cmp r2, r1 strhi r0, [r1], #4 /* store and increment start location */ bhi _init_section bx lr .ltorg .size _init_section, .-_init_section /****************************************************************************** * _copy_section: * * This function copies a section to a new location * ******************************************************************************/ .section .init, "ax" .code 32 .align 0x04 .global _copy_section .type _copy_section, %function /* r0 = source address * r1 = destination start address * r2 = destination end address * * r3 is a scratch register */ _copy_section: cmp r2, r1 ldrhi r3, [r0], #4 strhi r3, [r1], #4 bhi _copy_section bx lr .ltorg .size _copy_section, .-_copy_section /****************************************************************************** * _delay_cycles: * * This function delays for the specified number of cycles * ******************************************************************************/ .section .init, "ax" .code 32 .align 0x04 .global _delay_cycles .type _delay_cycles, %function /* r0 = number of cycles to delay */ /* If r0 is zero it will be the maximum length delay */ _delay_cycles: subs r0, r0, #1 bne _delay_cycles bx lr .ltorg .size _delay_cycles, .-_delay_cycles /****************************************************************************** * _dead_loop: Something really unexpected happened (like a reserved * * exception). Just hang. * ******************************************************************************/ _dead_loop: b _dead_loop .ltorg