/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2006 by Marcoen Hirschberg * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #ifndef __S3C2440_H__ #define __S3C2440_H__ #define LCD_BUFFER_SIZE (320*240*2) #define TTB_SIZE (0x4000) /* must be 16Kb (0x4000) aligned */ #define TTB_BASE_ADDR (0x30000000 + (MEMORYSIZE*1024*1024) - TTB_SIZE) #define LCD_FRAME_ADDR (TTB_BASE_ADDR - LCD_BUFFER_SIZE) #define TTB_BASE ((unsigned long *)TTB_BASE_ADDR) /* End of memory */ #define FRAME ((unsigned short *)LCD_FRAME_ADDR) /* Right before TTB */ /* Memory Controllers */ #define BWSCON (*(volatile unsigned long *)0x48000000) /* Bus width & wait status control */ #define BANKCON0 (*(volatile unsigned long *)0x48000004) /* Boot ROM control */ #define BANKCON1 (*(volatile unsigned long *)0x48000008) /* BANK1 control */ #define BANKCON2 (*(volatile unsigned long *)0x4800000C) /* BANK2 control */ #define BANKCON3 (*(volatile unsigned long *)0x48000010) /* BANK3 control */ #define BANKCON4 (*(volatile unsigned long *)0x48000014) /* BANK4 control */ #define BANKCON5 (*(volatile unsigned long *)0x48000018) /* BANK5 control */ #define BANKCON6 (*(volatile unsigned long *)0x4800001C) /* BANK6 control */ #define BANKCON7 (*(volatile unsigned long *)0x48000020) /* BANK7 control */ #define REFRESH (*(volatile unsigned long *)0x48000024) /* DRAM/SDRAM refresh control */ #define BANKSIZE (*(volatile unsigned long *)0x48000028) /* Flexible bank size */ #define MRSRB6 (*(volatile unsigned long *)0x4800002C) /* Mode register set for SDRAM BANK6 */ #define MRSRB7 (*(volatile unsigned long *)0x48000030) /* Mode register set for SDRAM BANK7 */ /* USB Host Controller */ #define OHCI_BASE 0x49000000 /* Interrupt Controller */ #define SRCPND (*(volatile unsigned long *)0x4A000000) /* Interrupt request status */ #define INTMOD (*(volatile unsigned long *)0x4A000004) /* Interrupt mode control */ #define INTMSK (*(volatile unsigned long *)0x4A000008) /* Interrupt mask control */ #define PRIORITY (*(volatile unsigned long *)0x4A00000C) /* IRQ priority control */ #define INTPND (*(volatile unsigned long *)0x4A000010) /* Interrupt request status */ #define INTOFFSET (*(volatile unsigned long *)0x4A000014) /* Interrupt request source offset */ #define SUBSRCPND (*(volatile unsigned long *)0x4A000018) /* Sub source pending */ #define INTSUBMSK (*(volatile unsigned long *)0x4A00001C) /* Interrupt sub mask */ /* Interrupt indexes - INTOFFSET - IRQ mode only */ /* Arbiter 5 => Arbiter 6 Req 5 */ #define ADC_INTOFFSET 31 /* REQ4 */ #define RTC_INTOFFSET 30 /* REQ3 */ #define SPI1_INTOFFSET 29 /* REQ2 */ #define UART0_INTOFFSET 28 /* REQ1 */ /* Arbiter 4 => Arbiter 6 Req 4 */ #define IIC_INTOFFSET 27 /* REQ5 */ #define USBH_INTOFFSET 26 /* REQ4 */ #define USBD_INTOFFSET 25 /* REQ3 */ #define NFCON_INTOFFSET 24 /* REQ2 */ #define UART1_INTOFFSET 23 /* REQ1 */ #define SPI0_INTOFFSET 22 /* REQ0 */ /* Arbiter 3 => Arbiter 6 Req 3 */ #define SDI_INTOFFSET 21 /* REQ5 */ #define DMA3_INTOFFSET 20 /* REQ4 */ #define DMA2_INTOFFSET 19 /* REQ3 */ #define DMA1_INTOFFSET 18 /* REQ2 */ #define DMA0_INTOFFSET 17 /* REQ1 */ #define LCD_INTOFFSET 16 /* REQ0 */ /* Arbiter 2 => Arbiter 6 Req 2 */ #define UART2_INTOFFSET 15 /* REQ5 */ #define TIMER4_INTOFFSET 14 /* REQ4 */ #define TIMER3_INTOFFSET 13 /* REQ3 */ #define TIMER2_INTOFFSET 12 /* REQ2 */ #define TIMER1_INTOFFSET 11 /* REQ1 */ #define TIMER0_INTOFFSET 10 /* REQ0 */ /* Arbiter 1 => Arbiter 6 Req 1 */ #define WDT_AC97_INTOFFSET 9 /* REQ5 */ #define TICK_INTOFFSET 8 /* REQ4 */ #define nBATT_FLT_INTOFFSET 7 /* REQ3 */ #define CAM_INTOFFSET 6 /* REQ2 */ #define EINT8_23_INTOFFSET 5 /* REQ1 */ #define EINT4_7_INTOFFSET 4 /* REQ0 */ /* Arbiter 0 => Arbiter 6 Req 0 */ #define EINT3_INTOFFSET 3 /* REQ4 */ #define EINT2_INTOFFSET 2 /* REQ3 */ #define EINT1_INTOFFSET 1 /* REQ2 */ #define EINT0_INTOFFSET 0 /* REQ1 */ /* Interrupt bitmasks - SRCPND, INTMOD, INTMSK, INTPND */ /* Arbiter 5 => Arbiter 6 Req 5 */ #define ADC_MASK (1 << 31) /* REQ4 */ #define RTC_MASK (1 << 30) /* REQ3 */ #define SPI1_MASK (1 << 29) /* REQ2 */ #define UART0_MASK (1 << 28) /* REQ1 */ /* Arbiter 4 => Arbiter 6 Req 4 */ #define IIC_MASK (1 << 27) /* REQ5 */ #define USBH_MASK (1 << 26) /* REQ4 */ #define USBD_MASK (1 << 25) /* REQ3 */ #define NFCON_MASK (1 << 24) /* REQ2 */ #define UART1_MASK (1 << 23) /* REQ1 */ #define SPI0_MASK (1 << 22) /* REQ0 */ /* Arbiter 3 => Arbiter 6 Req 3 */ #define SDI_MASK (1 << 21) /* REQ5 */ #define DMA3_MASK (1 << 20) /* REQ4 */ #define DMA2_MASK (1 << 19) /* REQ3 */ #define DMA1_MASK (1 << 18) /* REQ2 */ #define DMA0_MASK (1 << 17) /* REQ1 */ #define LCD_MASK (1 << 16) /* REQ0 */ /* Arbiter 2 => Arbiter 6 Req 2 */ #define UART2_MASK (1 << 15) /* REQ5 */ #define TIMER4_MASK (1 << 14) /* REQ4 */ #define TIMER3_MASK (1 << 13) /* REQ3 */ #define TIMER2_MASK (1 << 12) /* REQ2 */ #define TIMER1_MASK (1 << 11) /* REQ1 */ #define TIMER0_MASK (1 << 10) /* REQ0 */ /* Arbiter 1 => Arbiter 6 Req 1 */ #define WDT_AC97_MASK (1 << 9) /* REQ5 */ #define TICK_MASK (1 << 8) /* REQ4 */ #define nBATT_FLT_MASK (1 << 7) /* REQ3 */ #define CAM_MASK (1 << 6) /* REQ2 */ #define EINT8_23_MASK (1 << 5) /* REQ1 */ #define EINT4_7_MASK (1 << 4) /* REQ0 */ /* Arbiter 0 => Arbiter 6 Req 0 */ #define EINT3_MASK (1 << 3) /* REQ4 */ #define EINT2_MASK (1 << 2) /* REQ3 */ #define EINT1_MASK (1 << 1) /* REQ2 */ #define EINT0_MASK (1 << 0) /* REQ1 */ /* DMA */ #define DISRC0 (*(volatile unsigned long *)0x4B000000) /* DMA 0 initial source */ #define DISRCC0 (*(volatile unsigned long *)0x4B000004) /* DMA 0 initial source control */ #define DIDST0 (*(volatile unsigned long *)0x4B000008) /* DMA 0 initial destination */ #define DIDSTC0 (*(volatile unsigned long *)0x4B00000C) /* DMA 0 initial destination control */ #define DCON0 (*(volatile unsigned long *)0x4B000010) /* DMA 0 control */ #define DSTAT0 (*(volatile unsigned long *)0x4B000014) /* DMA 0 count */ #define DCSRC0 (*(volatile unsigned long *)0x4B000018) /* DMA 0 current source */ #define DCDST0 (*(volatile unsigned long *)0x4B00001C) /* DMA 0 current destination */ #define DMASKTRIG0 (*(volatile unsigned long *)0x4B000020) /* DMA 0 mask trigger */ #define DISRC1 (*(volatile unsigned long *)0x4B000040) /* DMA 1 initial source */ #define DISRCC1 (*(volatile unsigned long *)0x4B000044) /* DMA 1 initial source control */ #define DIDST1 (*(volatile unsigned long *)0x4B000048) /* DMA 1 initial destination */ #define DIDSTC1 (*(volatile unsigned long *)0x4B00004C) /* DMA 1 initial destination control */ #define DCON1 (*(volatile unsigned long *)0x4B000050) /* DMA 1 control */ #define DSTAT1 (*(volatile unsigned long *)0x4B000054) /* DMA 1 count */ #define DCSRC1 (*(volatile unsigned long *)0x4B000058) /* DMA 1 current source */ #define DCDST1 (*(volatile unsigned long *)0x4B00005C) /* DMA 1 current destination */ #define DMASKTRIG1 (*(volatile unsigned long *)0x4B000060) /* DMA 1 mask trigger */ #define DISRC2 (*(volatile unsigned long *)0x4B000080) /* DMA 2 initial source */ #define DISRCC2 (*(volatile unsigned long *)0x4B000084) /* DMA 2 initial source control */ #define DIDST2 (*(volatile unsigned long *)0x4B000088) /* DMA 2 initial destination */ #define DIDSTC2 (*(volatile unsigned long *)0x4B00008C) /* DMA 2 initial destination control */ #define DCON2 (*(volatile unsigned long *)0x4B000090) /* DMA 2 control */ #define DSTAT2 (*(volatile unsigned long *)0x4B000094) /* DMA 2 count */ #define DCSRC2 (*(volatile unsigned long *)0x4B000098) /* DMA 2 current source */ #define DCDST2 (*(volatile unsigned long *)0x4B00009C) /* DMA 2 current destination */ #define DMASKTRIG2 (*(volatile unsigned long *)0x4B0000A0) /* DMA 2 mask trigger */ #define DISRC3 (*(volatile unsigned long *)0x4B0000C0) /* DMA 3 initial source */ #define DISRCC3 (*(volatile unsigned long *)0x4B0000C4) /* DMA 3 initial source control */ #define DIDST3 (*(volatile unsigned long *)0x4B0000C8) /* DMA 3 initial destination */ #define DIDSTC3 (*(volatile unsigned long *)0x4B0000CC) /* DMA 3 initial destination control */ #define DCON3 (*(volatile unsigned long *)0x4B0000D0) /* DMA 3 control */ #define DSTAT3 (*(volatile unsigned long *)0x4B0000D4) /* DMA 3 count */ #define DCSRC3 (*(volatile unsigned long *)0x4B0000D8) /* DMA 3 current source */ #define DCDST3 (*(volatile unsigned long *)0x4B0000DC) /* DMA 3 current destination */ #define DMASKTRIG3 (*(volatile unsigned long *)0x4B0000E0) /* DMA 3 mask trigger */ #define DISRCC_LOC_AHB (0 << 1) #define DISRCC_LOC_APB (1 << 1) #define DISRCC_INC_AUTO (0 << 0) #define DISRCC_INC_FIXED (1 << 0) #define DIDSTC_CHK_INT_TC_ZERO (0 << 2) #define DIDSTC_CHK_INT_AFTER_RELOAD (1 << 2) #define DIDSTC_LOC_AHB (0 << 1) #define DIDSTC_LOC_APB (1 << 1) #define DIDSTC_INC_AUTO (0 << 0) #define DIDSTC_INC_FIXED (1 << 0) #define DCON_DMD_HS (1 << 31) #define DCON_SYNC_APB (0 << 30) #define DCON_SYNC_AHB (1 << 30) #define DCON_INT (1 << 29) #define DCON_TSZ (1 << 28) #define DCON_SERVMODE_WHOLE (1 << 27) #define DCON_HWSRCSEL (1 << 24) #define DCON_HW_SEL (1 << 23) #define DCON_NO_RELOAD (1 << 22) #define DCON_DSZ_MASK (3 << 20) #define DCON_DSZ_BYTE (0 << 20) #define DCON_DSZ_HALF_WORD (1 << 20) #define DCON_DSZ_WORD (2 << 20) #define DCON_TC (1 << 0) #define DSTAT_STAT_BUSY (1 << 20) #define DSTAT_CURR_TC (1 << 0) #define DMASKTRIG_STOP (1 << 2) #define DMASKTRIG_ON (1 << 1) #define DMASKTRIG_SW_TRIG (1 << 0) /* Get DMA request source (HWSRCSEL) from the map for the specified channel */ #define DMA_GET_SRC(map,channel) ( ((map) << (channel*8)) & 0xff) #define DMA_CH0(x) (x<<0) #define DMA_CH1(x) (x<<8) #define DMA_CH2(x) (x<<16) #define DMA_CH3(x) (x<<24) #define DMA_INVALID 0xff #define DMA_INV0 DMA_CH0(DMA_INVALID) #define DMA_INV1 DMA_CH1(DMA_INVALID) #define DMA_INV2 DMA_CH2(DMA_INVALID) #define DMA_INV3 DMA_CH3(DMA_INVALID) /* This map encodes the DMA request source field (HWSRCSEL) since it's value * depends on channel number and peripheral type. */ #define DMA_SRC_MAP_XDREQ0 (DMA_CH0(0) | DMA_INV1 | DMA_INV2 | DMA_INV3) #define DMA_SRC_MAP_XDREQ1 (DMA_INV0 | DMA_CH1(0) | DMA_INV2 | DMA_INV3) #define DMA_SRC_MAP_USB_EP1 (DMA_CH0(4) | DMA_INV1 | DMA_INV2 | DMA_INV3) #define DMA_SRC_MAP_USB_EP2 (DMA_INV0 | DMA_CH1(4) | DMA_INV2 | DMA_INV3) #define DMA_SRC_MAP_USB_EP3 (DMA_INV0 | DMA_INV1 | DMA_CH2(4) | DMA_INV3) #define DMA_SRC_MAP_USB_EP4 (DMA_INV0 | DMA_INV1 | DMA_INV2 | DMA_CH3(4)) #define DMA_SRC_MAP_SDI (DMA_CH0(2) | DMA_CH1(6) | DMA_CH2(2) | DMA_CH3(1)) #define DMA_SRC_MAP_UART0 (DMA_CH0(1) | DMA_INV1 | DMA_INV2 | DMA_INV3) #define DMA_SRC_MAP_UART1 (DMA_INV0 | DMA_CH1(1) | DMA_INV2 | DMA_INV3) #define DMA_SRC_MAP_UART2 (DMA_INV0 | DMA_INV1 | DMA_INV2 | DMA_CH3(0)) #define DMA_SRC_MAP_I2SSDO (DMA_CH0(5) | DMA_INV1 | DMA_CH2(0) | DMA_INV3) #define DMA_SRC_MAP_I2SSDI (DMA_INV0 | DMA_CH1(2) | DMA_CH2(1) | DMA_INV3) #define DMA_SRC_MAP_PCMOUT (DMA_INV0 | DMA_CH1(5) | DMA_INV2 | DMA_CH3(6)) #define DMA_SRC_MAP_PCMIN (DMA_CH0(6) | DMA_INV1 | DMA_CH2(5) | DMA_INV3) #define DMA_SRC_MAP_MICIN (DMA_INV0 | DMA_INV1 | DMA_CH2(6) | DMA_CH3(5)) #define DMA_SRC_MAP_SPI0 (DMA_INV0 | DMA_CH1(3) | DMA_INV2 | DMA_INV3) #define DMA_SRC_MAP_SPI1 (DMA_INV0 | DMA_INV1 | DMA_INV2 | DMA_CH3(2)) #define DMA_SRC_MAP_TIMER (DMA_CH0(3) | DMA_INV1 | DMA_CH2(3) | DMA_CH3(3)) /* Clock & Power Management */ #define LOCKTIME (*(volatile unsigned long *)0x4C000000) /* PLL lock time counter */ #define MPLLCON (*(volatile unsigned long *)0x4C000004) /* MPLL control */ #define UPLLCON (*(volatile unsigned long *)0x4C000008) /* UPLL control */ #define CLKCON (*(volatile unsigned long *)0x4C00000C) /* Clock generator control */ #define CLKSLOW (*(volatile unsigned long *)0x4C000010) /* Slow clock control */ #define CLKDIVN (*(volatile unsigned long *)0x4C000014) /* Clock divider control */ #define CAMDIVN (*(volatile unsigned long *)0x4C000018) /* Camera clock divider control */ /* LCD Controller */ #define LCDCON1 (*(volatile unsigned long *)0x4D000000) /* LCD control 1 */ #define LCDCON2 (*(volatile unsigned long *)0x4D000004) /* LCD control 2 */ #define LCDCON3 (*(volatile unsigned long *)0x4D000008) /* LCD control 3 */ #define LCDCON4 (*(volatile unsigned long *)0x4D00000C) /* LCD control 4 */ #define LCDCON5 (*(volatile unsigned long *)0x4D000010) /* LCD control 5 */ #define LCDSADDR1 (*(volatile unsigned long *)0x4D000014) /* STN/TFT: frame buffer start address 1 */ #define LCDSADDR2 (*(volatile unsigned long *)0x4D000018) /* STN/TFT: frame buffer start address 2 */ #define LCDSADDR3 (*(volatile unsigned long *)0x4D00001C) /* STN/TFT: virtual screen address set */ #define REDLUT (*(volatile unsigned long *)0x4D000020) /* STN: red lookup table */ #define GREENLUT (*(volatile unsigned long *)0x4D000024) /* STN: green lookup table */ #define BLUELUT (*(volatile unsigned long *)0x4D000028) /* STN: blue lookup table */ #define DITHMODE (*(volatile unsigned long *)0x4D00004C) /* STN: dithering mode */ #define TPAL (*(volatile unsigned long *)0x4D000050) /* TFT: temporary palette */ #define LCDINTPND (*(volatile unsigned long *)0x4D000054) /* LCD interrupt pending */ #define LCDSRCPND (*(volatile unsigned long *)0x4D000058) /* LCD interrupt source */ #define LCDINTMSK (*(volatile unsigned long *)0x4D00005C) /* LCD interrupt mask */ #define TCONSEL (*(volatile unsigned long *)0x4D000060) /* TCON(LPC3600/LCC3600) control */ /* NAND Flash */ #define NFCONF (*(volatile unsigned long *)0x4E000000) /* NAND flash configuration */ #define NFCONT (*(volatile unsigned long *)0x4E000004) /* NAND flash control */ #define NFCMD (*(volatile unsigned long *)0x4E000008) /* NAND flash command */ #define NFADDR (*(volatile unsigned long *)0x4E00000C) /* NAND flash address */ #define NFDATA (*(volatile unsigned long *)0x4E000010) /* NAND flash data */ #define NFMECC0 (*(volatile unsigned long *)0x4E000014) /* NAND flash main area ECC0/1 */ #define NFMECC1 (*(volatile unsigned long *)0x4E000018) /* NAND flash main area ECC2/3 */ #define NFSECC (*(volatile unsigned long *)0x4E00001C) /* NAND flash spare area ECC */ #define NFSTAT (*(volatile unsigned long *)0x4E000020) /* NAND flash operation status */ #define NFESTAT0 (*(volatile unsigned long *)0x4E000024) /* NAND flash ECC status for I/O[7:0] */ #define NFESTAT1 (*(volatile unsigned long *)0x4E000028) /* NAND flash ECC status for I/O[15:8] */ #define NFMECCSTAT0 (*(volatile unsigned long *)0x4E00002C) /* NAND flash main area ECC0 status */ #define NFMECCSTAT1 (*(volatile unsigned long *)0x4E000030) /* NAND flash main area ECC1 status */ #define NFSECCSTAT (*(volatile unsigned long *)0x4E000034) /* NAND flash spare area ECC status */ #define NFSBLK (*(volatile unsigned long *)0x4E000038) /* NAND flash start block address */ #define NFEBLK (*(volatile unsigned long *)0x4E00003C) /* NAND flash end block address */ /* Camera Interface */ #define CISRCFMT (*(volatile unsigned long *)0x4F000000) /* Input source format */ #define CIWDOFST (*(volatile unsigned long *)0x4F000004) /* Window offset register */ #define CIGCTRL (*(volatile unsigned long *)0x4F000008) /* Global control register */ #define CICOYSA1 (*(volatile unsigned long *)0x4F000018) /* Y 1st frame start address for codec DMA */ #define CICOYSA2 (*(volatile unsigned long *)0x4F00001C) /* Y 2nd frame start address for codec DMA */ #define CICOYSA3 (*(volatile unsigned long *)0x4F000020) /* Y 3nd frame start address for codec DMA */ #define CICOYSA4 (*(volatile unsigned long *)0x4F000024) /* Y 4th frame start address for codec DMA */ #define CICOCBSA1 (*(volatile unsigned long *)0x4F000028) /* Cb 1st frame start address for codec DMA */ #define CICOCBSA2 (*(volatile unsigned long *)0x4F00002C) /* Cb 2nd frame start address for codec DMA */ #define CICOCBSA3 (*(volatile unsigned long *)0x4F000030) /* Cb 3nd frame start address for codec DMA */ #define CICOCBSA4 (*(volatile unsigned long *)0x4F000034) /* Cb 4th frame start address for codec DMA */ #define CICOCRSA1 (*(volatile unsigned long *)0x4F000038) /* Cr 1st frame start address for codec DMA */ #define CICOCRSA2 (*(volatile unsigned long *)0x4F00003C) /* Cr 2nd frame start address for codec DMA */ #define CICOCRSA3 (*(volatile unsigned long *)0x4F000040) /* Cr 3nd frame start address for codec DMA */ #define CICOCRSA4 (*(volatile unsigned long *)0x4F000044) /* Cr 4th frame start address for codec DMA */ #define CICOTRGFMT (*(volatile unsigned long *)0x4F000048) /* Target image format of codec DMA */ #define CICOCTRL (*(volatile unsigned long *)0x4F00004C) /* Codec DMA control related */ #define CICOSCPRERATIO (*(volatile unsigned long *)0x4F000050) /* Codec pre-scaler ratio control */ #define CICOSCPREDST (*(volatile unsigned long *)0x4F000054) /* Codec pre-scaler destination format */ #define CICOSCCTRL (*(volatile unsigned long *)0x4F000058) /* Codec main-scaler control */ #define CICOTAREA (*(volatile unsigned long *)0x4F00005C) /* Codec scaler target area */ #define CICOSTATUS (*(volatile unsigned long *)0x4F000064) /* Codec path status */ #define CIPRCLRSA1 (*(volatile unsigned long *)0x4F00006C) /* RGB 1st frame start address for preview DMA */ #define CIPRCLRSA2 (*(volatile unsigned long *)0x4F000070) /* RGB 2nd frame start address for preview DMA */ #define CIPRCLRSA3 (*(volatile unsigned long *)0x4F000074) /* RGB 3nd frame start address for preview DMA */ #define CIPRCLRSA4 (*(volatile unsigned long *)0x4F000078) /* RGB 4th frame start address for preview DMA */ #define CIPRTRGFMT (*(volatile unsigned long *)0x4F00007C) /* Target image format of preview DMA */ #define CIPRCTRL (*(volatile unsigned long *)0x4F000080) /* Preview DMA control related */ #define CIPRSCPRERATIO (*(volatile unsigned long *)0x4F000084) /* Preview pre-scaler ratio control */ #define CIPRSCPREDST (*(volatile unsigned long *)0x4F000088) /* Preview pre-scaler destination format */ #define CIPRSCCTRL (*(volatile unsigned long *)0x4F00008C) /* Preview main-scaler control */ #define CIPRTAREA (*(volatile unsigned long *)0x4F000090) /* Preview scaler target area */ #define CIPRSTATUS (*(volatile unsigned long *)0x4F000098) /* Preview path status */ #define CIIMGCPT (*(volatile unsigned long *)0x4F0000A0) /* Image capture enable command */ /* UART */ #define ULCON0 (*(volatile unsigned long *)0x50000000) /* UART 0 line control */ #define UCON0 (*(volatile unsigned long *)0x50000004) /* UART 0 control */ #define UFCON0 (*(volatile unsigned long *)0x50000008) /* UART 0 FIFO control */ #define UMCON0 (*(volatile unsigned long *)0x5000000C) /* UART 0 modem control */ #define UTRSTAT0 (*(volatile unsigned long *)0x50000010) /* UART 0 Tx/Rx status */ #define UERSTAT0 (*(volatile unsigned long *)0x50000014) /* UART 0 Rx error status */ #define UFSTAT0 (*(volatile unsigned long *)0x50000018) /* UART 0 FIFO status */ #define UMSTAT0 (*(volatile unsigned long *)0x5000001C) /* UART 0 modem status */ #define UTXH0 (*(volatile unsigned char *)0x50000020) /* UART 0 transmission hold */ #define URXH0 (*(volatile unsigned char *)0x50000024) /* UART 0 receive buffer */ #define UBRDIV0 (*(volatile unsigned long *)0x50000028) /* UART 0 baud rate divisor */ #define ULCON1 (*(volatile unsigned long *)0x50004000) /* UART 1 line control */ #define UCON1 (*(volatile unsigned long *)0x50004004) /* UART 1 control */ #define UFCON1 (*(volatile unsigned long *)0x50004008) /* UART 1 FIFO control */ #define UMCON1 (*(volatile unsigned long *)0x5000400C) /* UART 1 modem control */ #define UTRSTAT1 (*(volatile unsigned long *)0x50004010) /* UART 1 Tx/Rx status */ #define UERSTAT1 (*(volatile unsigned long *)0x50004014) /* UART 1 Rx error status */ #define UFSTAT1 (*(volatile unsigned long *)0x50004018) /* UART 1 FIFO status */ #define UMSTAT1 (*(volatile unsigned long *)0x5000401C) /* UART 1 modem status */ #define UTXH1 (*(volatile unsigned char*)0x50004020) /* UART 1 transmission hold */ #define URXH1 (*(volatile unsigned char*)0x50004024) /* UART 1 receive buffer */ #define UBRDIV1 (*(volatile unsigned long *)0x50004028) /* UART 1 baud rate divisor */ #define ULCON2 (*(volatile unsigned long *)0x50008000) /* UART 2 line control */ #define UCON2 (*(volatile unsigned long *)0x50008004) /* UART 2 control */ #define UFCON2 (*(volatile unsigned long *)0x50008008) /* UART 2 FIFO control */ #define UTRSTAT2 (*(volatile unsigned long *)0x50008010) /* UART 2 Tx/Rx status */ #define UERSTAT2 (*(volatile unsigned long *)0x50008014) /* UART 2 Rx error status */ #define UFSTAT2 (*(volatile unsigned long *)0x50008018) /* UART 2 FIFO status */ #define UTXH2 (*(volatile unsigned char*)0x50008020) /* UART 2 transmission hold */ #define URXH2 (*(volatile unsigned char*)0x50008024) /* UART 2 receive buffer */ #define UBRDIV2 (*(volatile unsigned long *)0x50008028) /* UART 2 baud rate divisor */ /* PWM Timer */ #define TCFG0 (*(volatile unsigned long *)0x51000000) /* Timer configuration */ #define TCFG1 (*(volatile unsigned long *)0x51000004) /* Timer configuration */ #define TCON (*(volatile unsigned long *)0x51000008) /* Timer control */ #define TCNTB0 (*(volatile unsigned long *)0x5100000C) /* Timer count buffer 0 */ #define TCMPB0 (*(volatile unsigned long *)0x51000010) /* Timer compare buffer 0 */ #define TCNTO0 (*(volatile unsigned long *)0x51000014) /* Timer count observation 0 */ #define TCNTB1 (*(volatile unsigned long *)0x51000018) /* Timer count buffer 1 */ #define TCMPB1 (*(volatile unsigned long *)0x5100001C) /* Timer compare buffer 1 */ #define TCNTO1 (*(volatile unsigned long *)0x51000020) /* Timer count observation 1 */ #define TCNTB2 (*(volatile unsigned long *)0x51000024) /* Timer count buffer 2 */ #define TCMPB2 (*(volatile unsigned long *)0x51000028) /* Timer compare buffer 2 */ #define TCNTO2 (*(volatile unsigned long *)0x5100002C) /* Timer count observation 2 */ #define TCNTB3 (*(volatile unsigned long *)0x51000030) /* Timer count buffer 3 */ #define TCMPB3 (*(volatile unsigned long *)0x51000034) /* Timer compare buffer 3 */ #define TCNTO3 (*(volatile unsigned long *)0x51000038) /* Timer count observation 3 */ #define TCNTB4 (*(volatile unsigned long *)0x5100003C) /* Timer count buffer 4 */ #define TCNTO4 (*(volatile unsigned long *)0x51000040) /* Timer count observation 4 */ /* USB Device */ #define FUNC_ADDR_REG (*(volatile unsigned char *)0x52000140) /* Function address */ #define PWR_REG (*(volatile unsigned char *)0x52000144) /* Power management */ #define EP_INT_REG (*(volatile unsigned char *)0x52000148) /* EP interrupt pending and clear */ #define USB_INT_REG (*(volatile unsigned char *)0x52000158) /* USB interrupt pending and clear */ #define EP_INT_EN_REG (*(volatile unsigned char *)0x5200015C) /* Interrupt enable */ #define USB_INT_EN_REG (*(volatile unsigned char *)0x5200016C) /* Interrupt enable */ #define FRAME_NUM1_REG (*(volatile unsigned char *)0x52000170) /* Frame number lower byte */ #define FRAME_NUM2_REG (*(volatile unsigned char *)0x52000174) /* Frame number higher byte */ #define INDEX_REG (*(volatile unsigned char *)0x52000178) /* Register index */ #define EP0_CSR (*(volatile unsigned char *)0x52000184) /* Endpoint 0 status */ #define IN_CSR1_REG (*(volatile unsigned char *)0x52000184) /* In endpoint control status */ #define IN_CSR2_REG (*(volatile unsigned char *)0x52000188) /* In endpoint control status */ #define MAXP_REG (*(volatile unsigned char *)0x52000180) /* Endpoint max packet */ #define OUT_CSR1_REG (*(volatile unsigned char *)0x52000190) /* Out endpoint control status */ #define OUT_CSR2_REG (*(volatile unsigned char *)0x52000194) /* Out endpoint control status */ #define OUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x52000198) /* Endpoint out write count */ #define OUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019C) /* Endpoint out write count */ #define EP0_FIFO (*(volatile unsigned char *)0x520001C0) /* Endpoint 0 FIFO */ #define EP1_FIFO (*(volatile unsigned char *)0x520001C4) /* Endpoint 1 FIFO */ #define EP2_FIFO (*(volatile unsigned char *)0x520001C8) /* Endpoint 2 FIFO */ #define EP3_FIFO (*(volatile unsigned char *)0x520001CC) /* Endpoint 3 FIFO */ #define EP4_FIFO (*(volatile unsigned char *)0x520001D0) /* Endpoint 4 FIFO */ #define EP1_DMA_CON (*(volatile unsigned char *)0x52000200) /* EP1 DMA Interface control */ #define EP1_DMA_UNIT (*(volatile unsigned char *)0x52000204) /* EP1 DMA Tx unit counter */ #define EP1_DMA_FIFO (*(volatile unsigned char *)0x52000208) /* EP1 DMA Tx FIFO counter */ #define EP1_DMA_TTC_L (*(volatile unsigned char *)0x5200020C) /* EP1 DMA Total Tx counter */ #define EP1_DMA_TTC_M (*(volatile unsigned char *)0x52000210) /* EP1 DMA Total Tx counter */ #define EP1_DMA_TTC_H (*(volatile unsigned char *)0x52000214) /* EP1 DMA Total Tx counter */ #define EP2_DMA_CON (*(volatile unsigned char *)0x52000218) /* EP2 DMA interface control */ #define EP2_DMA_UNIT (*(volatile unsigned char *)0x5200021C) /* EP2 DMA Tx Unit counter */ #define EP2_DMA_FIFO (*(volatile unsigned char *)0x52000220) /* EP2 DMA Tx FIFO counter */ #define EP2_DMA_TTC_L (*(volatile unsigned char *)0x52000224) /* EP2 DMA total Tx counter */ #define EP2_DMA_TTC_M (*(volatile unsigned char *)0x52000228) /* EP2 DMA total Tx counter */ #define EP2_DMA_TTC_H (*(volatile unsigned char *)0x5200022C) /* EP2 DMA Total Tx counter */ #define EP3_DMA_CON (*(volatile unsigned char *)0x52000240) /* EP3 DMA Interface control */ #define EP3_DMA_UNIT (*(volatile unsigned char *)0x52000244) /* EP3 DMA Tx Unit counter */ #define EP3_DMA_FIFO (*(volatile unsigned char *)0x52000248) /* EP3 DMA Tx FIFO counter */ #define EP3_DMA_TTC_L (*(volatile unsigned char *)0x5200024C) /* EP3 DMA Total Tx counter */ #define EP3_DMA_TTC_M (*(volatile unsigned char *)0x52000250) /* EP3 DMA Total Tx counter */ #define EP3_DMA_TTC_H (*(volatile unsigned char *)0x52000254) /* EP3 DMA Total Tx counter */ #define EP4_DMA_CON (*(volatile unsigned char *)0x52000258) /* EP4 DMA Interface control */ #define EP4_DMA_UNIT (*(volatile unsigned char *)0x5200025C) /* EP4 DMA Tx Unit counter */ #define EP4_DMA_FIFO (*(volatile unsigned char *)0x52000260) /* EP4 DMA Tx FIFO counter */ #define EP4_DMA_TTC_L (*(volatile unsigned char *)0x52000264) /* EP4 DMA Total Tx counter */ #define EP4_DMA_TTC_M (*(volatile unsigned char *)0x52000268) /* EP4 DMA Total Tx counter */ #define EP4_DMA_TTC_H (*(volatile unsigned char *)0x5200026C) /* EP4 DMA Total Tx counter */ /* Watchdog Timer */ #define WTCON (*(volatile unsigned long *)0x53000000) /* Watchdog timer mode */ #define WTDAT (*(volatile unsigned long *)0x53000004) /* Watchdog timer data */ #define WTCNT (*(volatile unsigned long *)0x53000008) /* Watchdog timer count */ /* IIC */ #define IICCON (*(volatile unsigned long *)0x54000000) /* IIC control */ #define IICSTAT (*(volatile unsigned long *)0x54000004) /* IIC status */ #define IICADD (*(volatile unsigned long *)0x54000008) /* IIC address */ #define IICDS (*(volatile unsigned long *)0x5400000C) /* IIC data shift */ #define IICLC (*(volatile unsigned long *)0x54000010) /* IIC multi-master line control */ /* IIS */ #define IISCON (*(volatile unsigned long *)0x55000000) /* IIS control */ #define IISMOD (*(volatile unsigned long *)0x55000004) /* IIS mode */ #define IISPSR (*(volatile unsigned long *)0x55000008) /* IIS prescaler */ #define IISFCON (*(volatile unsigned long *)0x5500000C) /* IIS FIFO control */ #define IISFIFO (*(volatile unsigned short *)0x55000010) /* IIS FIFO entry */ #define IISCON_RIGHT_CHANNEL (1 << 8) #define IISCON_TX_FIFO_NOT_EMPTY (1 << 7) #define IISCON_RX_FIFO_NOT_FULL (1 << 6) #define IISCON_TX_DMA_REQUEST (1 << 5) #define IISCON_RX_DMA_REQUEST (1 << 4) #define IISCON_TX_IDLE (1 << 3) #define IISCON_RX_IDLE (1 << 2) #define IISCON_IIS_PRESCALER_ENABLE (1 << 1) #define IISCON_IIS_INTERFACE_ENABLE (1 << 0) #define IISMOD_MASTER_CLOCK_PCLK (0 << 9) #define IISMOD_MASTER_CLOCK_MPLLIN (1 << 9) #define IISMOD_MASTER_MODE (0 << 8) #define IISMOD_SLAVE_MODE (1 << 8) #define IISMOD_NO_TRANSFER (0 << 6) #define IISMOD_RECEIVE_MODE (1 << 6) #define IISMOD_TRANSMIT_MODE (2 << 6) #define IISMOD_TRANSMIT_RECEIVE_MODE (3 << 6) #define IISMOD_LOW_LEFT (0 << 5) #define IISMOD_HIGH_LEFT (1 << 5) #define IISMOD_IIS (0 << 4) #define IISMOD_MSB (1 << 4) #define IISMOD_8_BIT (0 << 3) #define IISMOD_16_BIT (1 << 3) #define IISMOD_MASTER_CLOCK_256FS (0 << 2) #define IISMOD_MASTER_CLOCK_384FS (1 << 2) #define IISMOD_BIT_CLOCK_16FS (0 << 0) #define IISMOD_BIT_CLOCK_32FS (1 << 0) #define IISMOD_BIT_CLOCK_48FS (2 << 0) #define IISPSR_PRESCALER_A (1 << 5) #define IISPSR_PRESCALER_B (1 << 0) /* I/O port */ #define GPACON (*(volatile unsigned long *)0x56000000) /* Port A control */ #define GPADAT (*(volatile unsigned long *)0x56000004) /* Port A data */ #define GPBCON (*(volatile unsigned long *)0x56000010) /* Port B control */ #define GPBDAT (*(volatile unsigned long *)0x56000014) /* Port B data */ #define GPBUP (*(volatile unsigned long *)0x56000018) /* Pull-up control B */ #define GPCCON (*(volatile unsigned long *)0x56000020) /* Port C control */ #define GPCDAT (*(volatile unsigned long *)0x56000024) /* Port C data */ #define GPCUP (*(volatile unsigned long *)0x56000028) /* Pull-up control C */ #define GPDCON (*(volatile unsigned long *)0x56000030) /* Port D control */ #define GPDDAT (*(volatile unsigned long *)0x56000034) /* Port D data */ #define GPDUP (*(volatile unsigned long *)0x56000038) /* Pull-up control D */ #define GPECON (*(volatile unsigned long *)0x56000040) /* Port E control */ #define GPEDAT (*(volatile unsigned long *)0x56000044) /* Port E data */ #define GPEUP (*(volatile unsigned long *)0x56000048) /* Pull-up control E */ #define GPFCON (*(volatile unsigned long *)0x56000050) /* Port F control */ #define GPFDAT (*(volatile unsigned long *)0x56000054) /* Port F data */ #define GPFUP (*(volatile unsigned long *)0x56000058) /* Pull-up control F */ #define GPGCON (*(volatile unsigned long *)0x56000060) /* Port G control */ #define GPGDAT (*(volatile unsigned long *)0x56000064) /* Port G data */ #define GPGUP (*(volatile unsigned long *)0x56000068) /* Pull-up control G */ #define GPHCON (*(volatile unsigned long *)0x56000070) /* Port H control */ #define GPHDAT (*(volatile unsigned long *)0x56000074) /* Port H data */ #define GPHUP (*(volatile unsigned long *)0x56000078) /* Pull-up control H */ #define MISCCR (*(volatile unsigned long *)0x56000080) /* Miscellaneous control */ #define DCLKCON (*(volatile unsigned long *)0x56000084) /* DCLK0/1 control */ #define EXTINT0 (*(volatile unsigned long *)0x56000088) /* External interrupt control register 0 */ #define EXTINT1 (*(volatile unsigned long *)0x5600008C) /* External interrupt control register 1 */ #define EXTINT2 (*(volatile unsigned long *)0x56000090) /* External interrupt control register 2 */ #define EINTFLT0 (*(volatile unsigned long *)0x56000094) /* Reserved */ #define EINTFLT1 (*(volatile unsigned long *)0x56000098) /* Reserved */ #define EINTFLT2 (*(volatile unsigned long *)0x5600009C) /* External interrupt filter control register 2 */ #define EINTFLT3 (*(volatile unsigned long *)0x560000A0) /* External interrupt filter control register 3 */ #define EINTMASK (*(volatile unsigned long *)0x560000A4) /* External interrupt mask */ #define EINTPEND (*(volatile unsigned long *)0x560000A8) /* External interrupt pending */ #define GSTATUS0 (*(volatile unsigned long *)0x560000AC) /* External pin status */ #define GSTATUS1 (*(volatile unsigned long *)0x560000B0) /* Chip ID */ #define GSTATUS2 (*(volatile unsigned long *)0x560000B4) /* Reset status */ #define GSTATUS3 (*(volatile unsigned long *)0x560000B8) /* Inform register */ #define GSTATUS4 (*(volatile unsigned long *)0x560000BC) /* Inform register */ #define MSLCON (*(volatile unsigned long *)0x560000CC) /* Memory sleep control register */ #define GPJCON (*(volatile unsigned long *)0x560000D0) /* Port J control */ #define GPJDAT (*(volatile unsigned long *)0x560000D4) /* Port J data */ #define GPJUP (*(volatile unsigned long *)0x560000D8) /* Pull-up control J */ /* RTC */ #define RTCCON (*(volatile unsigned char *)0x57000040) /* RTC control */ #define TICNT (*(volatile unsigned char *)0x57000044) /* Tick time count */ #define RTCALM (*(volatile unsigned char *)0x57000050) /* RTC alarm control */ #define ALMSEC (*(volatile unsigned char *)0x57000054) /* Alarm second */ #define ALMMIN (*(volatile unsigned char *)0x57000058) /* Alarm minute */ #define ALMHOUR (*(volatile unsigned char *)0x5700005C) /* Alarm hour */ #define ALMDATE (*(volatile unsigned char *)0x57000060) /* alarm day */ #define ALMMON (*(volatile unsigned char *)0x57000064) /* Alarm month */ #define ALMYEAR (*(volatile unsigned char *)0x57000068) /* Alarm year */ #define BCDSEC (*(volatile unsigned char *)0x57000070) /* BCD second */ #define BCDMIN (*(volatile unsigned char *)0x57000074) /* BCD minute */ #define BCDHOUR (*(volatile unsigned char *)0x57000078) /* BCD hour */ #define BCDDATE (*(volatile unsigned char *)0x5700007C) /* BCD day */ #define BCDDAY (*(volatile unsigned char *)0x57000080) /* BCD date */ #define BCDMON (*(volatile unsigned char *)0x57000084) /* BCD month */ #define BCDYEAR (*(volatile unsigned char *)0x57000088) /* BCD year */ /* A/D Converter */ #define ADCCON (*(volatile unsigned long *)0x58000000) /* ADC control */ #define ADCTSC (*(volatile unsigned long *)0x58000004) /* ADC touch screen control */ #define ADCDLY (*(volatile unsigned long *)0x58000008) /* ADC start or interval delay */ #define ADCDAT0 (*(volatile unsigned long *)0x5800000C) /* ADC conversion data */ #define ADCDAT1 (*(volatile unsigned long *)0x58000010) /* ADC conversion data */ #define ADCUPDN (*(volatile unsigned long *)0x58000014) /* Stylus up or down interrupt status */ /* SPI */ #define SPCON0 (*(volatile unsigned long *)0x59000000) /* SPI control */ #define SPSTA0 (*(volatile unsigned long *)0x59000004) /* SPI status */ #define SPPIN0 (*(volatile unsigned long *)0x59000008) /* SPI pin control */ #define SPPRE0 (*(volatile unsigned long *)0x5900000C) /* SPI baud rate prescaler */ #define SPTDAT0 (*(volatile unsigned long *)0x59000010) /* SPI Tx data */ #define SPRDAT0 (*(volatile unsigned long *)0x59000014) /* SPI Rx data */ #define SPCON1 (*(volatile unsigned long *)0x59000020) /* SPI control */ #define SPSTA1 (*(volatile unsigned long *)0x59000024) /* SPI status */ #define SPPIN1 (*(volatile unsigned long *)0x59000028) /* SPI pin control */ #define SPPRE1 (*(volatile unsigned long *)0x5900002C) /* SPI baud rate prescaler */ #define SPTDAT1 (*(volatile unsigned long *)0x59000030) /* SPI Tx data */ #define SPRDAT1 (*(volatile unsigned long *)0x59000034) /* SPI Rx data */ /* SD Interface */ #define SDICON (*(volatile unsigned long *)0x5A000000) /* SDI control */ #define SDIPRE (*(volatile unsigned long *)0x5A000004) /* SDI baud rate prescaler */ #define SDICARG (*(volatile unsigned long *)0x5A000008) /* SDI command argument */ #define SDICCON (*(volatile unsigned long *)0x5A00000C) /* SDI command control */ #define SDICSTA (*(volatile unsigned long *)0x5A000010) /* SDI command status */ #define SDIRSP0 (*(volatile unsigned long *)0x5A000014) /* SDI response */ #define SDIRSP1 (*(volatile unsigned long *)0x5A000018) /* SDI response */ #define SDIRSP2 (*(volatile unsigned long *)0x5A00001C) /* SDI response */ #define SDIRSP3 (*(volatile unsigned long *)0x5A000020) /* SDI response */ #define SDIDTIMER (*(volatile unsigned long *)0x5A000024) /* SDI data / busy timer */ #define SDIBSIZE (*(volatile unsigned long *)0x5A000028) /* SDI block size */ #define SDIDCON (*(volatile unsigned long *)0x5A00002C) /* SDI data control */ #define SDIDCNT (*(volatile unsigned long *)0x5A000030) /* SDI data remain counter */ #define SDIDSTA (*(volatile unsigned long *)0x5A000034) /* SDI data status */ #define SDIFSTA (*(volatile unsigned long *)0x5A000038) /* SDI FIFO status */ #define SDIIMSK (*(volatile unsigned long *)0x5A00003C) /* SDI interrupt mask */ /* SDI data - LE = Little Endian, BE = Big Endian */ #define SDIDAT_LLE (*(volatile unsigned long *)0x5A000040) /* 32 bit */ #define SDIDAT_HLE (*(volatile unsigned short *)0x5A000044) /* 16 */ #define SDIDAT_BLE (*(volatile unsigned char *)0x5A000048) /* 8 */ #define SDIDAT_LBE (*(volatile unsigned long *)0x5A00004C) /* 32 */ #define SDIDAT_HBE (*(volatile unsigned short *)0x5A000041) /* 16 */ #define SDIDAT_BBE (*(volatile unsigned char *)0x5A000043) /* 8 */ /* SDI register bit definitions. S3C2440 is a superset of S3C2410 */ #define S3C2440_SDICON_SDRESET (1<<8) #define S3C2440_SDICON_MMCCLOCK (1<<5) #define S3C2410_SDICON_BYTEORDER (1<<4) #define S3C2410_SDICON_SDIOIRQ (1<<3) #define S3C2410_SDICON_RWAITEN (1<<2) #define S3C2410_SDICON_FIFORESET (1<<1) #define S3C2410_SDICON_CLOCKTYPE (1<<0) #define S3C2410_SDICMDCON_ABORT (1<<12) #define S3C2410_SDICMDCON_WITHDATA (1<<11) #define S3C2410_SDICMDCON_LONGRSP (1<<10) #define S3C2410_SDICMDCON_WAITRSP (1<<9) #define S3C2410_SDICMDCON_CMDSTART (1<<8) #define S3C2410_SDICMDCON_SENDERHOST (1<<6) #define S3C2410_SDICMDCON_INDEX (0x3f) #define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) #define S3C2410_SDICMDSTAT_CMDSENT (1<<11) #define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) #define S3C2410_SDICMDSTAT_RSPFIN (1<<9) #define S3C2410_SDICMDSTAT_XFERING (1<<8) #define S3C2410_SDICMDSTAT_INDEX (0xff) #define S3C2440_SDIDCON_DS_BYTE (0<<22) #define S3C2440_SDIDCON_DS_HALFWORD (1<<22) #define S3C2440_SDIDCON_DS_WORD (2<<22) #define S3C2410_SDIDCON_IRQPERIOD (1<<21) #define S3C2410_SDIDCON_TXAFTERRESP (1<<20) #define S3C2410_SDIDCON_RXAFTERCMD (1<<19) #define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) #define S3C2410_SDIDCON_BLOCKMODE (1<<17) #define S3C2410_SDIDCON_WIDEBUS (1<<16) #define S3C2410_SDIDCON_DMAEN (1<<15) #define S3C2410_SDIDCON_STOP (0<<14) #define S3C2440_SDIDCON_DATSTART (1<<14) #define S3C2410_SDIDCON_DATMODE (3<<12) #define S3C2410_SDIDCON_BLKNUM (0xfff) /* constants for S3C2410_SDIDCON_DATMODE */ #define S3C2410_SDIDCON_XFER_READY (0<<12) #define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) #define S3C2410_SDIDCON_XFER_RXSTART (2<<12) #define S3C2410_SDIDCON_XFER_TXSTART (3<<12) #define S3C2410_SDIDCNT_BLKNUM_MASK (0xFFF) #define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) #define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) #define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) #define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ #define S3C2410_SDIDSTA_CRCFAIL (1<<7) #define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) #define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) #define S3C2410_SDIDSTA_XFERFINISH (1<<4) #define S3C2410_SDIDSTA_BUSYFINISH (1<<3) #define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ #define S3C2410_SDIDSTA_TXDATAON (1<<1) #define S3C2410_SDIDSTA_RXDATAON (1<<0) #define S3C2410_SDIDSTA_CLEAR_BITS ( S3C2410_SDIDSTA_BUSYFINISH | \ S3C2410_SDIDSTA_XFERFINISH | S3C2410_SDIDSTA_DATATIMEOUT | \ S3C2410_SDIDSTA_RXCRCFAIL | S3C2410_SDIDSTA_CRCFAIL | \ S3C2410_SDIDSTA_SDIOIRQDETECT | S3C2410_SDIDSTA_RDYWAITREQ ) #define S3C2440_SDIFSTA_FIFORESET (1<<16) #define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ #define S3C2410_SDIFSTA_TFDET (1<<13) #define S3C2410_SDIFSTA_RFDET (1<<12) #define S3C2410_SDIFSTA_TFHALF (1<<11) #define S3C2410_SDIFSTA_TFEMPTY (1<<10) #define S3C2410_SDIFSTA_RFLAST (1<<9) #define S3C2410_SDIFSTA_RFFULL (1<<8) #define S3C2410_SDIFSTA_RFHALF (1<<7) #define S3C2410_SDIFSTA_COUNTMASK (0x7f) #define S3C2410_SDIIMSK_RESPONSECRC (1<<17) #define S3C2410_SDIIMSK_CMDSENT (1<<16) #define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) #define S3C2410_SDIIMSK_RESPONSEND (1<<14) #define S3C2410_SDIIMSK_READWAIT (1<<13) #define S3C2410_SDIIMSK_SDIOIRQ (1<<12) #define S3C2410_SDIIMSK_FIFOFAIL (1<<11) #define S3C2410_SDIIMSK_CRCSTATUS (1<<10) #define S3C2410_SDIIMSK_DATACRC (1<<9) #define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) #define S3C2410_SDIIMSK_DATAFINISH (1<<7) #define S3C2410_SDIIMSK_BUSYFINISH (1<<6) #define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ #define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) #define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) #define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) #define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) #define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) /* AC97 Audio-CODEC Interface */ #define AC_GLBCTRL (*(volatile unsigned long *)0x5B000000) /* AC97 global control register */ #define AC_GLBSTAT (*(volatile unsigned long *)0x5B000004) /* AC97 global status register */ #define AC_CODEC_CMD (*(volatile unsigned long *)0x5B000008) /* AC97 codec command register */ #define AC_CODEC_STAT (*(volatile unsigned long *)0x5B00000C) /* AC97 codec status register */ #define AC_PCMADDR (*(volatile unsigned long *)0x5B000010) /* AC97 PCM out/in channel FIFO address register */ #define AC_MICADDR (*(volatile unsigned long *)0x5B000014) /* AC97 mic in channel FIFO address register */ #define AC_PCMDATA (*(volatile unsigned long *)0x5B000018) /* AC97 PCM out/in channel FIFO data register */ #define AC_MICDATA (*(volatile unsigned long *)0x5B00001C) /* AC97 MIC in channel FIFO data register */ /* Memory banks */ #define BANK0 0x00000000 #define BANK1 0x08000000 #define BANK2 0x10000000 #define BANK3 0x18000000 #define BANK4 0x20000000 #define BANK5 0x28000000 #define DRAM0 0x30000000 #define DRAM1 0x31000000 #define BOOTRAM 0x40000000 /* Timer frequency */ /* timer is based on PCLK and minimum division is 2 */ #define TIMER_FREQ (49156800/2) #define TIMER234_PRESCALE 21 /* I/O Port macros */ #define GPIO_INPUT 0 #define GPIO_OUTPUT 1 #define GPIO_FUNCTION 2 #define GPIO_ALT_FUNCTION 3 #define GPIO_PULLUP_DISABLE 1 #define GPIO_PULLUP_ENABLE 0 #define S3C2440_GPIO_CONFIG(port,pin,function) port = ( (port & ~(3<<(pin*2)) ) | (function<<(pin*2)) ) #define S3C2440_GPIO_PULLUP(port,pin,state) port = ( (port & ~(1<