/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2002 by Daniel Stenberg * * iPod driver based on code from the ipodlinux project - http://ipodlinux.org * Adapted for Rockbox in December 2005 * Original file: linux/arch/armnommu/mach-ipod/keyboard.c * Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org) * * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ /* * Rockbox button functions */ #include #include "config.h" #include "cpu.h" #include "system.h" #include "button.h" #include "kernel.h" #include "backlight.h" #include "adc.h" #include "serial.h" #include "power.h" #include "system.h" #include "powermgmt.h" /* iPod 3G and mini 1G, mini 2G uses iPod 4G code */ void handle_scroll_wheel(int new_scroll, int was_hold, int reverse) { int wheel_keycode = BUTTON_NONE; static int prev_scroll = -1; static int direction = 0; static int count = 0; static int scroll_state[4][4] = { {0, 1, -1, 0}, {-1, 0, 0, 1}, {1, 0, 0, -1}, {0, -1, 1, 0} }; if ( prev_scroll == -1 ) { prev_scroll = new_scroll; } else if (direction != scroll_state[prev_scroll][new_scroll]) { direction = scroll_state[prev_scroll][new_scroll]; count = 0; } else if (!was_hold) { backlight_on(); reset_poweroff_timer(); if (++count == 6) { /* reduce sensitivity */ count = 0; switch (direction) { case 1: if (reverse) { /* 'r' keypress */ wheel_keycode = BUTTON_SCROLL_FWD; } else { /* 'l' keypress */ wheel_keycode = BUTTON_SCROLL_BACK; } break; case -1: if (reverse) { /* 'l' keypress */ wheel_keycode = BUTTON_SCROLL_BACK; } else { /* 'r' keypress */ wheel_keycode = BUTTON_SCROLL_FWD; } break; default: /* only happens if we get out of sync */ break; } } } if (wheel_keycode != BUTTON_NONE && queue_empty(&button_queue)) queue_post(&button_queue, wheel_keycode, 0); prev_scroll = new_scroll; } static int ipod_3g_button_read(void) { unsigned char source, state; static int was_hold = 0; int btn = BUTTON_NONE; /* * we need some delay for g3, cause hold generates several interrupts, * some of them delayed */ udelay(250); /* get source of interupts */ source = GPIOA_INT_STAT; /* get current keypad status */ state = GPIOA_INPUT_VAL; GPIOA_INT_LEV = ~state; if (was_hold && source == 0x40 && state == 0xbf) { /* ack any active interrupts */ GPIOA_INT_CLR = source; return BUTTON_NONE; } was_hold = 0; if ((state & 0x20) == 0) { /* 3g hold switch is active low */ was_hold = 1; /* hold switch on 3g causes all outputs to go low */ /* we shouldn't interpret these as key presses */ GPIOA_INT_CLR = source; return BUTTON_NONE; } if ((state & 0x1) == 0) { btn |= BUTTON_RIGHT; } if ((state & 0x2) == 0) { btn |= BUTTON_SELECT; } if ((state & 0x4) == 0) { btn |= BUTTON_PLAY; } if ((state & 0x8) == 0) { btn |= BUTTON_LEFT; } if ((state & 0x10) == 0) { btn |= BUTTON_MENU; } if (source & 0xc0) { handle_scroll_wheel((state & 0xc0) >> 6, was_hold, 0); } /* ack any active interrupts */ GPIOA_INT_CLR = source; return btn; } void button_init_device(void) { GPIOA_INT_LEV = ~GPIOA_INPUT_VAL; GPIOA_INT_CLR = GPIOA_INT_STAT; GPIOA_INT_EN = 0xff; } /* * Get button pressed from hardware */ int button_read_device(void) { static bool hold_button = false; bool hold_button_old; /* normal buttons */ hold_button_old = hold_button; hold_button = button_hold(); if (hold_button != hold_button_old) backlight_hold_changed(hold_button); return ipod_3g_button_read(); } bool button_hold(void) { return (GPIOA_INPUT_VAL & 0x20)?false:true; } bool headphones_inserted(void) { return (GPIOC_INPUT_VAL & 0x1)?true:false; }