/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2007 by Andree Buschmann * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ .section .icode, "ax", %progbits /**************************************************************************** * void lcd_write_data(const fb_data *addr, * int pixelcount); * * Writes pixelcount pixels from src-pointer (lcd_framebuffer) to BCM dataport. */ .align 2 .global lcd_write_data .type lcd_write_data, %function /* r0 = addr, must be aligned */ lcd_write_data: /* r1 = pixel count, must be even */ stmfd sp!, {r4-r5, lr} mov lr, #0x30000000 /* LCD data port */ subs r1, r1, #16 .loop16: ldmgeia r0!, {r2-r5} stmgeia lr, {r2-r5} ldmgeia r0!, {r2-r5} stmgeia lr, {r2-r5} subges r1, r1, #16 bge .loop16 /* no need to correct the count, we're just checking bits from now */ tst r1, #8 ldmneia r0!, {r2-r5} stmneia lr, {r2-r5} tst r1, #4 ldmneia r0!, {r2-r3} stmneia lr, {r2-r3} tst r1, #2 ldrne r3, [r0], #4 strne r3, [lr] ldmfd sp!, {r4-r5, pc} /**************************************************************************** * extern void lcd_write_yuv420_lines(unsigned char const * const src[3], * unsigned bcmaddr * int width, * int stride); * * Conversion from Motion JPEG and MPEG Y'PbPr to RGB is: * |R| |1.164 0.000 1.596| |Y' - 16| * |G| = |1.164 -0.391 -0.813| |Pb - 128| * |B| |1.164 2.018 0.000| |Pr - 128| * * Scaled, normalized, rounded and tweaked to yield RGB 565: * |R| |74 0 101| |Y' - 16| >> 9 * |G| = |74 -24 -51| |Cb - 128| >> 8 * |B| |74 128 0| |Cr - 128| >> 9 * * Converts two lines from YUV to RGB565 and writes to BCM at once. First loop * loads Cb/Cr, calculates the chroma offset and saves them to buffer. Within * the second loop these chroma offset are reloaded from buffer. * Within each loop two pixels are calculated and written to BCM. Before each * loop the desired destination address is transmitted to BCM. */ .align 2 .global lcd_write_yuv420_lines .type lcd_write_yuv420_lines, %function lcd_write_yuv420_lines: /* r0 = src = yuv_src */ /* r1 = dst = bcmaddr */ /* r2 = width */ /* r3 = stride */ stmfd sp!, { r4-r11, lr } /* save non-scratch */ ldmia r0, { r9-r11 } /* r9 = yuv_src[0] = Y'_p */ /* r10 = yuv_src[1] = Cb_p */ /* r11 = yuv_src[2] = Cr_p */ add r3, r9, r3 /* r3 = &ysrc[stride] */ add r4, r2, r2, asr #1 /* chroma buffer lenght = width/2 *3 */ mov r4, r4, asl #2 /* use words for str/ldm possibility */ add r4, r4, #19 /* plus room for 4 additional words, */ bic r4, r4, #3 /* rounded up to multiples of 4 byte */ sub sp, sp, r4 /* and allocate on stack */ stmia sp, {r1-r4} /* bcmaddr, width, &ysrc[stride], stack_alloc */ mov r7, r2 /* r7 = loop count */ add r8, sp, #16 /* chroma buffer */ mov lr, #0x30000000 /* LCD data port */ /* The following writes dest address to BCM and waits for write ready */ orr r2, lr, #0x00010000 /* r2 = BCM_WR_ADDR32 */ orr r6, lr, #0x00030000 /* r6 = BCM_CONTROL */ str r1, [r2] /* BCM_WR_ADDR32 = bcmaddr */ .busy_1: ldrh r1, [r6] /* while (!(BCM_CONTROL & 0x2)) */ tst r1, #0x2 beq .busy_1 /* 1st loop start */ 10: /* loop start */ ldrb r0, [r10], #1 /* r0 = *usrc++ = *Cb_p++ */ ldrb r1, [r11], #1 /* r1 = *vsrc++ = *Cr_p++ */ sub r0, r0, #128 /* r0 = Cb-128 */ sub r1, r1, #128 /* r1 = Cr-128 */ add r2, r1, r1, asl #1 /* r2 = Cr*51 + Cb*24 */ add r2, r2, r2, asl #4 add r2, r2, r0, asl #3 add r2, r2, r0, asl #4 add r4, r1, r1, asl #2 /* r1 = Cr*101 */ add r4, r4, r1, asl #5 add r1, r4, r1, asl #6 add r1, r1, #256 /* r1 = rv = (r1 + 256) >> 9 */ mov r1, r1, asr #9 rsb r2, r2, #128 /* r2 = guv = (-r2 + 128) >> 8 */ mov r2, r2, asr #8 add r0, r0, #2 /* r0 = bu = (Cb*128 + 256) >> 9 */ mov r0, r0, asr #2 stmia r8!, {r0-r2} /* store r0, r1 and r2 to chroma buffer */ /* 1st loop, first pixel */ ldrb r5, [r9], #1 /* r5 = *ysrc++ = *Y'_p++ */ sub r5, r5, #16 /* r5 = (Y'-16) * 74 */ add r3, r5, r5, asl #2 add r5, r3, r5, asl #5 add r6, r1, r5, asr #8 /* r6 = r = (Y >> 9) + rv */ add r3, r2, r5, asr #7 /* r3 = g = (Y >> 8) + guv */ add r4, r0, r5, asr #8 /* r4 = b = (Y >> 9) + bu */ orr r5, r6, r4 /* check if clamping is needed... */ orr r5, r5, r3, asr #1 /* ...at all */ cmp r5, #31 bls 15f /* -> no clamp */ cmp r6, #31 /* clamp r */ mvnhi r6, r6, asr #31 andhi r6, r6, #31 cmp r3, #63 /* clamp g */ mvnhi r3, r3, asr #31 andhi r3, r3, #63 cmp r4, #31 /* clamp b */ mvnhi r4, r4, asr #31 andhi r4, r4, #31 15: /* no clamp */ /* calculate pixel_1 and save to r5 for later pixel packing */ orr r4, r4, r3, lsl #5 /* pixel_1 = r<<11 | g<<5 | b */ orr r5, r4, r6, lsl #11 /* r5 = pixel_1 */ /* 1st loop, second pixel */ ldrb r4, [r9], #1 /* r4 = *ysrc++ = *Y'_p++ */ sub r4, r4, #16 /* r4 = (Y'-16) * 74 */ add r3, r4, r4, asl #2 add r4, r3, r4, asl #5 add r6, r1, r4, asr #8 /* r6 = r = (Y >> 9) + rv */ add r3, r2, r4, asr #7 /* r3 = g = (Y >> 8) + guv */ add r4, r0, r4, asr #8 /* r4 = b = (Y >> 9) + bu */ orr r0, r6, r4 /* check if clamping is needed... */ orr r0, r0, r3, asr #1 /* ...at all */ cmp r0, #31 bls 15f /* -> no clamp */ cmp r6, #31 /* clamp r */ mvnhi r6, r6, asr #31 andhi r6, r6, #31 cmp r3, #63 /* clamp g */ mvnhi r3, r3, asr #31 andhi r3, r3, #63 cmp r4, #31 /* clamp b */ mvnhi r4, r4, asr #31 andhi r4, r4, #31 15: /* no clamp */ /* calculate pixel_2 and pack with pixel_1 before writing */ orr r4, r4, r3, lsl #5 /* pixel_2 = r<<11 | g<<5 | b */ orr r4, r4, r6, lsl #11 /* r4 = pixel_2 */ orr r4, r5, r4, lsl #16 /* r4 = pixel_2<<16 | pixel_1 */ str r4, [lr] /* write packed pixels */ subs r7, r7, #2 /* check for loop end */ bgt 10b /* back to beginning */ /* 1st loop end */ /* Reload several registers for pointer rewinding for next loop */ add r8, sp, #16 /* chroma buffer */ ldmia sp, { r1, r7, r9} /* r1 = bcmaddr */ /* r7 = loop count */ /* r9 = &ysrc[stride] */ /* The following writes dest address to BCM and waits for write ready */ orr r2, lr, #0x00010000 /* r2 = BCM_WR_ADDR32 */ orr r6, lr, #0x00030000 /* r6 = BCM_CONTROL */ add r1, r1, #640 /* dst += (LCD_WIDTH*2) */ str r1, [r2] /* BCM_WR_ADDR32 = dst */ .busy_2: ldrh r1, [r6] /* while (!(BCM_CONTROL & 0x2)) */ tst r1, #0x2 beq .busy_2 /* 2nd loop start */ 20: /* loop start */ /* restore r0 (bu), r1 (rv) and r2 (guv) from chroma buffer */ ldmia r8!, {r0-r2} /* 2nd loop, first pixel */ ldrb r5, [r9], #1 /* r5 = *ysrc++ = *Y'_p++ */ sub r5, r5, #16 /* r5 = (Y'-16) * 74 */ add r3, r5, r5, asl #2 add r5, r3, r5, asl #5 add r6, r1, r5, asr #8 /* r6 = r = (Y >> 9) + rv */ add r3, r2, r5, asr #7 /* r3 = g = (Y >> 8) + guv */ add r4, r0, r5, asr #8 /* r4 = b = (Y >> 9) + bu */ orr r5, r6, r4 /* check if clamping is needed... */ orr r5, r5, r3, asr #1 /* ...at all */ cmp r5, #31 bls 15f /* -> no clamp */ cmp r6, #31 /* clamp r */ mvnhi r6, r6, asr #31 andhi r6, r6, #31 cmp r3, #63 /* clamp g */ mvnhi r3, r3, asr #31 andhi r3, r3, #63 cmp r4, #31 /* clamp b */ mvnhi r4, r4, asr #31 andhi r4, r4, #31 15: /* no clamp */ /* calculate pixel_1 and save to r5 for later pixel packing */ orr r4, r4, r3, lsl #5 /* pixel_1 = r<<11 | g<<5 | b */ orr r5, r4, r6, lsl #11 /* r5 = pixel_1 */ /* 2nd loop, second pixel */ ldrb r4, [r9], #1 /* r4 = *ysrc++ = *Y'_p++ */ sub r4, r4, #16 /* r4 = (Y'-16) * 74 */ add r3, r4, r4, asl #2 add r4, r3, r4, asl #5 add r6, r1, r4, asr #8 /* r6 = r = (Y >> 9) + rv */ add r3, r2, r4, asr #7 /* r3 = g = (Y >> 8) + guv */ add r4, r0, r4, asr #8 /* r4 = b = (Y >> 9) + bu */ orr r0, r6, r4 /* check if clamping is needed... */ orr r0, r0, r3, asr #1 /* ...at all */ cmp r0, #31 bls 15f /* -> no clamp */ cmp r6, #31 /* clamp r */ mvnhi r6, r6, asr #31 andhi r6, r6, #31 cmp r3, #63 /* clamp g */ mvnhi r3, r3, asr #31 andhi r3, r3, #63 cmp r4, #31 /* clamp b */ mvnhi r4, r4, asr #31 andhi r4, r4, #31 15: /* no clamp */ /* calculate pixel_2 and pack with pixel_1 before writing */ orr r4, r4, r3, lsl #5 /* pixel_2 = r<<11 | g<<5 | b */ orr r4, r4, r6, lsl #11 /* r4 = pixel_2 */ orr r4, r5, r4, lsl #16 /* r4 = pixel_2<<16 | pixel_1 */ str r4, [lr] /* write packed pixels */ subs r7, r7, #2 /* check for loop end */ bgt 20b /* back to beginning */ /* 2nd loop end */ ldr r3, [sp, #12] add sp, sp, r3 /* deallocate buffer */ ldmfd sp!, { r4-r11, pc } /* restore registers */ .ltorg .size lcd_write_yuv420_lines, .-lcd_write_yuv420_lines