/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2016 Amaury Pouly * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #ifndef __UPG_H__ #define __UPG_H__ #include "misc.h" #include "fwp.h" #include "mg.h" /** Firmware format * * The firmware starts with the MD5 hash of the entire file (except the MD5 hash * itself of course). This is used to check that the file was not corrupted. * The remaining of the file is encrypted (using DES) with the model key. The * encrypted part starts with a header containing the model signature and the * number of files. Since the header is encrypted, decrypting the header with * the key and finding the right signature serves to authenticate the firmware. * The header is followed by N entries (where N is the number of files) giving * the offset, within the file, and size of each file. Note that the files in * the firmware have no name. */ struct upg_md5_t { uint8_t md5[16]; }__attribute__((packed)); struct upg_header_t { uint8_t sig[NWZ_SIG_SIZE]; uint32_t nr_files; uint32_t pad; // make sure structure size is a multiple of 8 } __attribute__((packed)); struct upg_entry_t { uint32_t offset; uint32_t size; } __attribute__((packed)); /** KAS / Key / Signature * * Since this is all very confusing, we need some terminology and notations: * - [X, Y, Z] is a sequence of bytes, for example: * [8, 0x89, 42] * is a sequence of three bytes. * - "abcdef" is a string: it is a sequences of bytes where each byte happens to * be the ASCII encoding of a letter. So for example: * "abc" = [97, 98, 99] * because 'a' has ASCII encoding 97 and so one * - HexString(Seq) refers to the string where each byte of the original sequence * is represented in hexadecimal by two ASCII characters. For example: * HexString([8, 0x89, 42]) = "08892a" * because 8 = 0x08 so it represented by "08" and 42 = 0x2a. Note that the length * of HexString(Seq) is always exactly twice the length of Seq. * - DES(Seq,Pass) is the result of encrypting Seq with Pass using the DES cipher. * Seq must be a sequence of 8 bytes (known as a block) and Pass must be a * sequence of 8 bytes. The result is also a 8-byte sequence. * - ECB_DES([Block0, Block1, ..., BlockN], Pass) * = [DES(Block0,Pass), DES(Block1,Pass), ..., DES(BlockN,Pass)] * where Blocki is a block (8 byte). * * * A firmware upgrade file is always encrypted using a Key. To authenticate it, * the upgrade file (before encryption) contains a Sig(nature). The pair (Key,Sig) * is refered to as KeySig and is specific to each series. For example all * NWZ-E46x use the same KeySig but the NWZ-E46x and NWZ-A86x use different KeySig. * In the details, a Key is a sequence of 8 bytes and a Sig is also a sequence * of 8 bytes. A KeySig is a simply the concatenation of the Key followed by * the Sig, so it is a sequence of 16 bytes. Probably in an attempt to obfuscate * things a little further, Sony never provides the KeySig directly but instead * encrypts it using DES in ECB mode using a hardcoded password and provides * the hexadecimal string of the result, known as the KAS, which is thus a string * of 32 ASCII characters. * Note that since DES works on blocks of 8 bytes and ECB encrypts blocks * independently, it is the same to encrypt the KeySig as once or encrypt the Key * and Sig separately. * * To summarize: * Key = [K0, K1, K2, ..., K7] (8 bytes) (model specific) * Sig = [S0, S1, S2, ..., S7] (8 bytes) (model specific) * KeySig = [Key, Sig] = [K0, ... K7, S0, ..., S7] (16 bytes) * FwpPass = "ed295076" (8 bytes) (never changes) * EncKeySig = ECB_DES(KeySig, FwpPass) = [DES(Key, FwpPass), DES(Sig, FwpPass)] * KAS = HexString(EncKeySig) (32 characters) * * In theory, the Key and Sig can be any 8-byte sequence. In practice, they always * are strings, probably to make it easier to write them down. In many cases, the * Key and Sig are even the hexadecimal string of 4-byte sequences but it is * unclear if this is the result of pure luck, confused engineers, lazyness on * Sony's part or by design. The following code assumes that Key and Sig are * strings (though it could easily be fixed to work with anything if this is * really needed). * * * Here is a real example, from the NWZ-E46x Series: * Key = "6173819e" (note that this is a string and even a hex string in this case) * Sig = "30b82e5c" * KeySig = [Key, Sig] = "6173819e30b82e5c" * FwpPass = "ed295076" (never changes) * EncKeySig = ECB_DES(KeySig, FwpPass) * = [0x8a, 0x01, 0xb6, ..., 0xc5] (16 bytes) * KAS = HexString(EncKeySig) = "8a01b624bfbfde4a1662a1772220e3c5" * */ /* API */ struct nwz_model_t { const char *model; /* rockbox model codename */ bool confirmed; /* If the KAS is confirmed, it is the one extracted from the device. Otherwise, * it is a KAS built from a key and sig brute-forced from an upgrade. In this * case, the KAS might be different from the 'official' one although for all * intent and purposes it should not make any difference. */ char *kas; }; /* list of models with keys and status. Sentinel NULL entry at the end */ extern struct nwz_model_t g_model_list[]; /* An entry in the UPG file */ struct upg_file_entry_t { void *data; size_t size; }; struct upg_file_t { int nr_files; struct upg_file_entry_t *files; }; /* decrypt a KAS into a key and signature, return <0 if the KAS contains a non-hex * character */ int decrypt_keysig(const char kas[NWZ_KAS_SIZE], char key[NWZ_KEY_SIZE], char sig[NWZ_SIG_SIZE]); /* encrypt a key and signature into a KAS */ void encrypt_keysig(char kas[NWZ_KEY_SIZE], const char key[NWZ_SIG_SIZE], const char sig[NWZ_KAS_SIZE]); /* Read a UPG file: return a structure on a success or NULL on error. * Note that the memory buffer is modified to perform in-place decryption. */ struct upg_file_t *upg_read_memory(void *file, size_t size, char key[NWZ_KEY_SIZE], char sig[NWZ_SIG_SIZE], void *u, generic_printf_t printf); /* Write a UPG file: return a buffer containing the whole image, or NULL on error. */ void *upg_write_memory(struct upg_file_t *file, char key[NWZ_KEY_SIZE], char sig[NWZ_SIG_SIZE], size_t *out_size, void *u, generic_printf_t printf); /* create empty upg file */ struct upg_file_t *upg_new(void); /* append a file to a upg, data is NOT copied */ void upg_append(struct upg_file_t *file, void *data, size_t size); /* release upg file, will free file data pointers */ void upg_free(struct upg_file_t *file); #endif /* __UPG_H__ */