/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * PP5020 I2C driver * * Based on code from the ipodlinux project - http://ipodlinux.org/ * Adapted for Rockbox in November 2005 * * Original file: linux/arch/armnommu/mach-ipod/hardware.c * * Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org) * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "cpu.h" #include "kernel.h" #include "logf.h" #include "system.h" #include "i2c-pp5020.h" /* Local functions definitions */ #define IPOD_I2C_BASE 0x7000c000 #define IPOD_I2C_CTRL (IPOD_I2C_BASE+0x00) #define IPOD_I2C_ADDR (IPOD_I2C_BASE+0x04) #define IPOD_I2C_DATA0 (IPOD_I2C_BASE+0x0c) #define IPOD_I2C_DATA1 (IPOD_I2C_BASE+0x10) #define IPOD_I2C_DATA2 (IPOD_I2C_BASE+0x14) #define IPOD_I2C_DATA3 (IPOD_I2C_BASE+0x18) #define IPOD_I2C_STATUS (IPOD_I2C_BASE+0x1c) /* IPOD_I2C_CTRL bit definitions */ #define IPOD_I2C_SEND 0x80 /* IPOD_I2C_STATUS bit definitions */ #define IPOD_I2C_BUSY (1<<6) #define POLL_TIMEOUT (HZ) static int ipod_i2c_wait_not_busy(void) { unsigned long timeout; timeout = current_tick + POLL_TIMEOUT; while (TIME_BEFORE(current_tick, timeout)) { if (!(inb(IPOD_I2C_STATUS) & IPOD_I2C_BUSY)) { return 0; } yield(); } return -1; } static int ipod_i2c_read_byte(unsigned int addr, unsigned int *data) { if (ipod_i2c_wait_not_busy() < 0) { return -1; } { int old_irq_level = set_irq_level(HIGHEST_IRQ_LEVEL); /* clear top 15 bits, left shift 1, or in 0x1 for a read */ outb(((addr << 17) >> 16) | 0x1, IPOD_I2C_ADDR); outb(inb(IPOD_I2C_CTRL) | 0x20, IPOD_I2C_CTRL); outb(inb(IPOD_I2C_CTRL) | IPOD_I2C_SEND, IPOD_I2C_CTRL); set_irq_level(old_irq_level); if (data) { if (ipod_i2c_wait_not_busy() < 0) { return -1; } old_irq_level = set_irq_level(HIGHEST_IRQ_LEVEL); *data = inb(IPOD_I2C_DATA0); set_irq_level(old_irq_level); } } return 0; } static int ipod_i2c_send_bytes(unsigned int addr, unsigned int len, unsigned char *data) { int data_addr; unsigned int i; if (len < 1 || len > 4) { return -1; } if (ipod_i2c_wait_not_busy() < 0) { return -2; } { int old_irq_level = set_irq_level(HIGHEST_IRQ_LEVEL); /* clear top 15 bits, left shift 1 */ outb((addr << 17) >> 16, IPOD_I2C_ADDR); outb(inb(IPOD_I2C_CTRL) & ~0x20, IPOD_I2C_CTRL); data_addr = IPOD_I2C_DATA0; for ( i = 0; i < len; i++ ) { outb(*data++, data_addr); data_addr += 4; } outb((inb(IPOD_I2C_CTRL) & ~0x26) | ((len-1) << 1), IPOD_I2C_CTRL); outb(inb(IPOD_I2C_CTRL) | IPOD_I2C_SEND, IPOD_I2C_CTRL); set_irq_level(old_irq_level); } return 0x0; } static int ipod_i2c_send_byte(unsigned int addr, int data0) { unsigned char data[1]; data[0] = data0; return ipod_i2c_send_bytes(addr, 1, data); } /* Public functions */ static struct mutex i2c_mutex; int i2c_readbyte(unsigned int dev_addr, int addr) { int data; mutex_lock(&i2c_mutex); ipod_i2c_send_byte(dev_addr, addr); ipod_i2c_read_byte(dev_addr, &data); mutex_unlock(&i2c_mutex); return data; } int ipod_i2c_send(unsigned int addr, int data0, int data1) { int retval; unsigned char data[2]; data[0] = data0; data[1] = data1; mutex_lock(&i2c_mutex); retval = ipod_i2c_send_bytes(addr, 2, data); mutex_unlock(&i2c_mutex); return retval; } void i2c_init(void) { /* From ipodlinux */ #if defined(APPLE_IPODMINI) /* GPIO port C disable port 0x10 */ GPIOC_ENABLE &= ~0x10; /* GPIO port C disable port 0x20 */ GPIOC_ENABLE &= ~0x20; #endif outl(inl(0x6000600c) | 0x1000, 0x6000600c); /* enable 12 */ outl(inl(0x60006004) | 0x1000, 0x60006004); /* start reset 12 */ outl(inl(0x60006004) & ~0x1000, 0x60006004); /* end reset 12 */ outl(0x0, 0x600060a4); outl(0x80 | (0 << 8), 0x600060a4); mutex_init(&i2c_mutex); i2c_readbyte(0x8, 0); }