/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Driver for WM8731L audio codec * * Based on code from the ipodlinux project - http://ipodlinux.org/ * Adapted for Rockbox in January 2006 * * Original file: linux/arch/armnommu/mach-ipod/audio.c * * Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "logf.h" #include "system.h" #include "string.h" #include "audio.h" #include "wmcodec.h" #include "audiohw.h" #include "i2s.h" #include "sound.h" const struct sound_settings_info audiohw_settings[] = { [SOUND_VOLUME] = {"dB", 0, 1, -74, 6, -25}, /* HAVE_SW_TONE_CONTROLS */ [SOUND_BASS] = {"dB", 0, 1, -24, 24, 0}, [SOUND_TREBLE] = {"dB", 0, 1, -24, 24, 0}, [SOUND_BALANCE] = {"%", 0, 1,-100, 100, 0}, [SOUND_CHANNELS] = {"", 0, 1, 0, 5, 0}, [SOUND_STEREO_WIDTH] = {"%", 0, 5, 0, 250, 100}, #ifdef HAVE_RECORDING [SOUND_LEFT_GAIN] = {"dB", 1, 1, 0, 31, 23}, [SOUND_RIGHT_GAIN] = {"dB", 1, 1, 0, 31, 23}, [SOUND_MIC_GAIN] = {"dB", 1, 1, 0, 1, 0}, #endif }; /* Init values/shadows * Ignore bit 8 since that only specifies "both" for updating * gains */ static unsigned char wm8731_regs[7] = { [LINVOL] = LINVOL_LINMUTE, [RINVOL] = RINVOL_RINMUTE, [LOUTVOL] = ROUTVOL_RZCEN, [ROUTVOL] = ROUTVOL_RZCEN, [AAPCTRL] = AAPCTRL_MUTEMIC | AAPCTRL_DACSEL, [DAPCTRL] = DAPCTRL_DACMU, [PDCTRL] = PDCTRL_LINEINPD | PDCTRL_MICPD | PDCTRL_ADCPD | PDCTRL_OUTPD | PDCTRL_OSCPD | PDCTRL_CLKOUTPD, }; static void wm8731_write(int reg, unsigned val) { wm8731_regs[reg] = (unsigned char)val; wmcodec_write(reg, val); } static void wm8731_write_and(int reg, unsigned bits) { wm8731_write(reg, wm8731_regs[reg] & bits); } static void wm8731_write_or(int reg, unsigned bits) { wm8731_write(reg, wm8731_regs[reg] | bits); } /* convert tenth of dB volume (-730..60) to master volume register value */ int tenthdb2master(int db) { /* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */ /* 1111111 == +6dB (0x7f) */ /* 1111001 == 0dB (0x79) */ /* 0110000 == -73dB (0x30 */ /* 0101111 == mute (0x2f) */ if (db < VOLUME_MIN) { return 0x2f; } else { return((db/10)+0x30+73); } } int sound_val2phys(int setting, int value) { int result; switch(setting) { #ifdef HAVE_RECORDING case SOUND_LEFT_GAIN: case SOUND_RIGHT_GAIN: result = (value - 23) * 15; break; case SOUND_MIC_GAIN: result = value * 200; break; #endif default: result = value; break; } return result; } void audiohw_mute(bool mute) { if (mute) { /* Set DACMU = 1 to soft-mute the audio DACs. */ wm8731_write_or(DAPCTRL, DAPCTRL_DACMU); } else { /* Set DACMU = 0 to soft-un-mute the audio DACs. */ wm8731_write_and(DAPCTRL, ~DAPCTRL_DACMU); } } static void codec_set_active(int active) { /* set active to 0x0 or 0x1 */ wmcodec_write(ACTIVECTRL, active ? ACTIVECTRL_ACTIVE : 0); } void audiohw_preinit(void) { i2s_reset(); /* POWER UP SEQUENCE */ /* 1) Switch on power supplies. By default the WM8731 is in Standby Mode, * the DAC is digitally muted and the Audio Interface and Outputs are * all OFF. */ wmcodec_write(RESET, RESET_RESET); /* 2) Set all required bits in the Power Down register (0Ch) to '0'; * EXCEPT the OUTPD bit, this should be set to '1' (Default). */ wm8731_write(PDCTRL, wm8731_regs[PDCTRL]); /* 3) Set required values in all other registers except 12h (Active). */ wmcodec_write(AINTFCE, AINTFCE_FORMAT_I2S | AINTFCE_IWL_16BIT | #ifdef CODEC_SLAVE 0); #else AINTFCE_MS); #endif wm8731_write(AAPCTRL, wm8731_regs[AAPCTRL]); wm8731_write(DAPCTRL, wm8731_regs[DAPCTRL]); wmcodec_write(SAMPCTRL, WM8731_USB24_44100HZ); /* 5) The last write of the sequence should be setting OUTPD to '0' * (active) in register 0Ch, enabling the DAC signal path, free * of any significant power-up noise. */ wm8731_write_and(PDCTRL, ~PDCTRL_OUTPD); } void audiohw_postinit(void) { sleep(HZ); /* 4) Set the 'Active' bit in register 12h. */ codec_set_active(true); audiohw_mute(false); #if defined(IRIVER_H10) || defined(IRIVER_H10_5GB) /* We need to enable bit 4 of GPIOL for output for sound on H10 */ GPIOL_OUTPUT_VAL |= 0x10; #endif } void audiohw_set_master_vol(int vol_l, int vol_r) { /* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */ /* 1111111 == +6dB */ /* 1111001 == 0dB */ /* 0110000 == -73dB */ /* 0101111 == mute (0x2f) */ wm8731_write(LOUTVOL, LOUTVOL_LZCEN | (vol_l & LOUTVOL_LHPVOL_MASK)); wm8731_write(ROUTVOL, ROUTVOL_RZCEN | (vol_r & ROUTVOL_RHPVOL_MASK)); } /* Nice shutdown of WM8731 codec */ void audiohw_close(void) { /* POWER DOWN SEQUENCE */ /* 1) Set the OUTPD bit to '1' (power down). */ wm8731_write_or(PDCTRL, PDCTRL_OUTPD); /* 2) Remove the WM8731 supplies. */ } void audiohw_set_sample_rate(int sampling_control) { int rate = 0; switch(sampling_control) { case SAMPR_96: rate = WM8731_USB24_96000HZ; break; case SAMPR_88: rate = WM8731_USB24_88200HZ; break; case SAMPR_48: rate = WM8731_USB24_48000HZ; break; case SAMPR_44: rate = WM8731_USB24_44100HZ; break; case SAMPR_32: rate = WM8731_USB24_32000HZ; break; case SAMPR_8: rate = WM8731_USB24_8000HZ; break; } codec_set_active(false); wmcodec_write(SAMPCTRL, rate); codec_set_active(true); } #ifdef HAVE_RECORDING void audiohw_enable_recording(bool source_mic) { codec_set_active(false); wm8731_regs[PDCTRL] &= ~PDCTRL_ADCPD; /* NOTE: When switching to digital monitoring we will not want * the DAC disabled. */ wm8731_regs[PDCTRL] |= PDCTRL_DACPD; wm8731_regs[AAPCTRL] &= ~AAPCTRL_DACSEL; if (source_mic) { wm8731_write_or(LINVOL, LINVOL_LINMUTE); wm8731_write_or(RINVOL, RINVOL_RINMUTE); wm8731_regs[PDCTRL] &= ~PDCTRL_MICPD; wm8731_regs[PDCTRL] |= PDCTRL_LINEINPD; wm8731_regs[AAPCTRL] |= AAPCTRL_INSEL | AAPCTRL_SIDETONE; wm8731_regs[AAPCTRL] &= ~(AAPCTRL_MUTEMIC | AAPCTRL_BYPASS); } else { wm8731_regs[PDCTRL] |= PDCTRL_MICPD; wm8731_regs[PDCTRL] &= ~PDCTRL_LINEINPD; wm8731_regs[AAPCTRL] |= AAPCTRL_MUTEMIC | AAPCTRL_BYPASS; wm8731_regs[AAPCTRL] &= ~(AAPCTRL_INSEL | AAPCTRL_SIDETONE); } wm8731_write(PDCTRL, wm8731_regs[PDCTRL]); wm8731_write(AAPCTRL, wm8731_regs[AAPCTRL]); if (!source_mic) { wm8731_write_and(LINVOL, ~LINVOL_LINMUTE); wm8731_write_and(RINVOL, ~RINVOL_RINMUTE); } codec_set_active(true); } void audiohw_disable_recording(void) { codec_set_active(false); /* Mute inputs */ wm8731_write_or(LINVOL, LINVOL_LINMUTE); wm8731_write_or(RINVOL, RINVOL_RINMUTE); wm8731_write_or(AAPCTRL, AAPCTRL_MUTEMIC); /* Turn off input analog audio paths */ wm8731_regs[AAPCTRL] &= ~(AAPCTRL_BYPASS | AAPCTRL_SIDETONE); wm8731_write(AAPCTRL, wm8731_regs[AAPCTRL]); /* Set power config */ wm8731_regs[PDCTRL] &= ~PDCTRL_DACPD; wm8731_regs[PDCTRL] |= PDCTRL_MICPD | PDCTRL_LINEINPD | PDCTRL_ADCPD; wm8731_write(PDCTRL, wm8731_regs[PDCTRL]); /* Select DAC */ wm8731_write_or(AAPCTRL, AAPCTRL_DACSEL); codec_set_active(true); } void audiohw_set_recvol(int left, int right, int type) { switch (type) { case AUDIO_GAIN_MIC: if (left > 0) { wm8731_write_or(AAPCTRL, AAPCTRL_MIC_BOOST); } else { wm8731_write_and(AAPCTRL, ~AAPCTRL_MIC_BOOST); } break; case AUDIO_GAIN_LINEIN: wm8731_regs[LINVOL] &= ~LINVOL_MASK; wm8731_write(LINVOL, wm8731_regs[LINVOL] | (left & LINVOL_MASK)); wm8731_regs[RINVOL] &= ~RINVOL_MASK; wm8731_write(RINVOL, wm8731_regs[RINVOL] | (right & RINVOL_MASK)); break; default: return; } } void audiohw_set_monitor(bool enable) { if(enable) { wm8731_write_and(PDCTRL, ~PDCTRL_LINEINPD); wm8731_write_or(AAPCTRL, AAPCTRL_BYPASS); } else { wm8731_write_and(AAPCTRL, ~AAPCTRL_BYPASS); wm8731_write_or(PDCTRL, PDCTRL_LINEINPD); } } #endif /* HAVE_RECORDING */