\chapter{Advanced Topics} \newpage \section{\label{ref:CustomisingUI}Customising the userinterface} \subsection{\label{ref:GettingExtras}Getting Extras (Fonts,Languages)} Rockbox supports custom fonts (for the Recorder and Ondio only) and a number of different languages. Rockbox 2.4 comes with 41 fonts and 24 languages already included. If new fonts and language files have been created, then they will be found at \url{http://www.rockbox.org/fonts/} and \url{http://www.rockbox.org/lang/}. \subsection{\label{ref:LoadingForts}Loading Fonts (Recorder, Ondio)} Rockbox can load fonts dynamically. Simply copy the .fnt file to the disk and ``play'' them in the directory browser or select \textbf{General Settings {\textgreater} Fonts} from the Main Menu . If you want a font to be loaded automatically every time you start up, it must be located in the \textbf{/.rockbox }folder and the file name must be at most 24 characters long. Any BDF font file up to 16 pixels high should be usable with Rockbox. To convert from .bdf to .fnt, use the convbdf tool. This tool can be found on the Rockbox website (Linux: \url{http://www.rockbox.org/fonts/convbdf}, Windows: \url{http://www.rockbox.org/fonts/convbdf.exe}). \subsection{\label{ref:Loadinglanguages}Loading Languages} Rockbox can load language files at runtime. Simply copy the .lng file (do not use the .lang file) to the Jukebox and ``play'' it in the Rockbox directory browser or select \textbf{General Settings {}-{\textgreater} Languages }from the Main Menu. If you want a language to be loaded automatically every time you start up, it must be located in the \textbf{/.rockbox }folder and the file name must be a maximum of 24 characters long. Rockbox supports many different languages. You can get .lng files at \url{http://www.rockbox.org/lang/}. Currently all of these languages are included in the Rockbox distribution. If your language is not yet supported and you want to write your own language file, follow these instructions: \begin{itemize} \item Copy the\url{./ http://www.rockbox.org/lang/english.lang }file and start filling in the ``new:'' lines. \item Name your file {\textless}language{\textgreater}.lang, where {\textless}language{\textgreater} is the local name for your language. i.e. svenska.lang, francais.lang etc. \item When you are done, submit your .lang file to Rockbox patch tracker. (\url{http://sourceforge.net/tracker/?group_id=44306&atid=439120}) \end{itemize} \section{\label{ref:ConfiguringtheWPS}Configuring the WPS} \subsection{Description / General Info} \begin{itemize} \item The Custom While Playing Screen (WPS) display is used on both the Player and Recorder as a means to customise the WPS to the user's likings. \item After editing the .wps file, ``play'' it to make it take effect. \item The file may be 2 lines long for the Player, and 13 lines for the Recorder. \item All characters not preceded by \% are displayed as typed. \item Lines beginning with \# are comments and will be ignored. \end{itemize} \subsection{File Location} Custom WPS files may be located anywhere on the drive. The only restriction is that they must end in .wps. When PLAY is pressed on a .wps file, it will be used for future WPS screens. If the ``played'' .wps file is located in the /.rockbox folder, it will be remembered and used after reboot. The .wps filename must be no more than 24 characters long for it to be remembered. \subsection{Tags} \begin{itemize} \item {\bfseries ID3 Info Tags:} \%ia : ID3 Artist \%ic : ID3 Composer \%id : ID3 Album Name \%ig : ID3 Genre Name \%in : ID3 Track Number \%it : ID3 Track Title \%iy : ID3 Year \%iv : ID3 Version (1.0, 1.1, 2.2, 2.3, 2.4 or empty if no id3 tag) \item {\bfseries Battery Info:} \%bl : Show numeric battery level in percent \%bt : Show estimated battery time left \item {\bfseries File Info Tags:} \%fb : File Bitrate (in kbps) \%ff : File Frequency (in Hz) \%fm : File Name \%fn : File Name (without extension) \%fp : File Path \%fs : File Size (In Kilobytes) \%fv : ``(vbr)'' if variable bit rate or ``'' if constant bit rate \%d1 : First directory from end of file path. \%d2 : Second directory from end of file path. \%d3 : Third directory from end of file path. Example for the the \%dN commands: If the path is /Rock/Kent/Isola/11 {}-747.mp3, \%d1 is ``Isola'', \%d2 is ``Kent'', \%d3 is ``Rock''. \end{itemize} \begin{itemize} \item {\bfseries Playlist/Song Info Tags:} \%pb : Progress Bar \begin{itemize} \item[] { Player: This will display a 1 character ``cup'' that empties as the song progresses.} Recorder: This will replace the entire line with a progress bar. \end{itemize} \%pf : Player: Full{}-line progress bar + time display \%pc : Current Time In Song \%pe : Total Number of Playlist Entries \%pm : Peak Meter (Recorder only) {}- the entire line is used as volume peak meter. \%pn : Playlist Name (Without path or extension) \%pp : Playlist Position \%pr : Remaining Time In Song \%ps : Shuffle. Shows 's' if shuffle mode is enabled. \%pt : Total Track Time \%pv : Current volume \item {\bfseries Conditional Tags (If/Else block):} \%?xx{\textless}{\textbar}{\textgreater} : Conditional: if the tag specified by ``xx'' has a value, the text between the ``{\textless}'' and the ``{\textbar}'' is displayed, else the text between the ``{\textbar}'' and the ``{\textgreater}'' is displayed. The else part is optional, so the ``{\textbar}'' does not have to be specified if no else part is desired. The conditionals nest, so the text in the if and else part can contain all \% commands, including conditionals. \end{itemize} \begin{itemize} \item {\bfseries Next Song info} You can display information about the next song {}- the song that is about to play after the one currently playing (unless you change the plan). If you use the upper{}-case versions of the three tags: F, I and D, they will instead refer to the next song instead of the current one. Example: \%Ig is the genre name used in the next song and \%Ff is the mp3 frequency. Take note that the next song information WILL NOT be available at all times, but will most likely be available at the end of a song. We suggest you use the conditional display tag a lot when displaying information about the next song! \item {\bfseries Alternating sublines} It is possible to group items on each line into 2 or more groups or ``sublines''. Each subline will be displayed in succession on the line for a specified time, alternating continuously through each defined subline. Items on a line are broken into sublines with the semicolon ';' character. The display time for each subline defaults to 2 seconds unless modified by using the '\%t' tag to specify an alternate time (in seconds and optional tenths of a second) for the subline to be displayed. Subline related special characters and tags: ; : Split items on a line into separate sublines \%t : Set the subline display time. The '\%t' is followed by either integer seconds (\%t5), or seconds and tenths of a second (\%t3.5). Each alternating subline can still be optionally scrolled while it is being displayed, and scrollable formats can be displayed on the same line with non{}-scrollable formats (such as track elapsed time) as long as they are separated into different sublines. \item {\bfseries Other Tags:} \%\% : Display a '\%' \%{\textless} : Display a '{\textless}' \%{\textbar} : Display a '{\textbar}' \%{\textgreater} : Display a '{\textgreater}' \%s : Indicate that the line should scroll. Can occur anywhere in a line (given that the text is displayed; see conditionals above). You can specify up to 10 scrolling lines. Scrolling lines can not contain dynamic content such as timers, peak meters or progress bars. \end{itemize} {\bfseries Example File} \%s\%pp/\%pe: \%?it{\textless}\%it{\textbar}\%fn{\textgreater} {}- \%?ia{\textless}\%ia{\textbar}\%d2{\textgreater} {}- \%?id{\textless}\%id{\textbar}\%d1{\textgreater} \%pb\%pc/\%pt That is, ``tracknum {}- title [artist, album]'', where most fields are only displayed if available. Could also be rendered as ``filename'' or ``tracknum {}-title [artist]''. {\bfseries Default} If you haven't selected a .wps file in the /.rockbox directory, you get the hard coded layout. The default WPS screen for Players is: \%s\%pp/\%pe: \%?it{\textless}\%it{\textbar}\%fn{\textgreater} {}- \%?ia{\textless}\%ia{\textbar}\%d2{\textgreater} {}- \%?id{\textless}\%id{\textbar}\%d1{\textgreater} \%pc\%?ps{\textless}*{\textbar}/{\textgreater}\%pt And for the Recorder and Ondio: \%s\%?it{\textless}\%?in{\textless}\%in. {\textbar}{\textgreater}\%it{\textbar}\%fn{\textgreater} \%s\%?ia{\textless}\%ia{\textbar}\%?d2{\textless}\%d2{\textbar}(root){\textgreater}{\textgreater} \%s\%?id{\textless}\%id{\textbar}\%?d1{\textless}\%d1{\textbar}(root){\textgreater}{\textgreater} \%?iy{\textless}(\%iy){\textbar}{\textgreater} \%pc/\%pt [\%pp:\%pe] \%fbkBit \%?fv{\textless}avg{\textbar}{\textgreater} \%?iv{\textless}(id3v\%iv){\textbar}(no id3){\textgreater} \%pb \%pm \section{\label{ref:SettingsFile}Making your own settings file} A .cfg file is used to load settings from a plain text file. A .cfg file may reside anywhere on the hard disk. The only restriction is that the filename must end in .cfg Hint: Use the ``Write .cfg file'' feature (Main Menu{}-{\textgreater} General Settings) to save the current settings, then use a text editor to customize the settings file. {\bfseries Format Rules} \begin{itemize} \item Format: setting: value \item Each setting must be on a separate line. \item Lines starting with \# are ignored. \end{itemize} {\bfseries Settings (allowed values) [unit]} volume (0 {}- 100) bass ({}-15 {}- 15) treble ({}-15 {}- 15) balance ({}-100 {}- 100) channels (stereo, stereo narrow, stereo wide, mono, mono left, mono right, karaoke) shuffle (on, off) repeat (off, all, one) play selected (on, off) resume (off, ask, ask once, on) scan min step (1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, 30, 45, 60) [secs] scan accel (0 {}- 15) [double scan speed every X seconds] antiskip (0 {}- 7) [seconds] volume fade (on, off) sort case (on, off) show files (all, supported, music, playlists) follow playlist (on, off) playlist viewer icons (on, off) playlist viewer track display (on, off) recursive directory insert (on, off) scroll speed (0 {}- 15) scroll delay (0 {}- 250) [1/10s] scroll step (1 {}- 112) [pixels] bidir limit (0 {}- 200) [\% of screen width] contrast (0 {}- 63) backlight timeout (off, on, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 45, 60, 90) [seconds] backlight when plugged (on, off) disk spindown (3 {}- 254) [seconds] battery capacity (1500 {}- 2400) [mAh] idle poweroff (off, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 30, 45, 60) [minutes] lang (/path/filename.lng) wps (/path/filename.wps) autocreate bookmarks (on, off) autoload bookmarks (on, off) use most{}-recent{}-bookmarks (on, off) talk dir (off, number, spell, hover) talk file (off, number, spell, hover) talk menu (off, on) {\bfseries Recorder{}-specific settings} loudness (0 {}- 17) super bass (on, off) auto volume (off, 0.02, 2, 4, 8) [seconds] MDB enable (on, off) MDB strength (0 {--} 127) [dB] MDB harmonics (0 {--} 100) [\%] MDB center frequency (20{}-300) [Hz] MDB shape (50{}-300) [Hz] peak meter release (1 {}- 126) peak meter hold (off, 200ms, 300ms, 500ms, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 30, 1min) peak meter clip hold (on, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 45, 60, 90, 2min, 3min, 5min, 10min, 20min, 45min, 90min) peak meter busy (on, off) peak meter dbfs (on, off) (on = dbfs, off = linear) peak meter min (0 {}- 89) [dB] or (0 {}- 100) [\%] peak meter max (0 {}- 89) [dB] or (0 {}- 100) [\%] statusbar (on, off) scrollbar (on, off) volume display (graphic, numeric) battery display (graphic, numeric) time format (12hour, 24hour) font (/path/filename.fnt) invert (on, off) deep discharge (on, off) trickle charge (on, off) disk poweroff (on, off) rec quality (0 {}- 7) (0=smallest size, 7=highest quality) rec frequency (48, 44, 32, 24, 22, 16) [kHz] rec source (mic, line, spdif) rec channels (mono, stereo) rec mic gain (0 to 15) rec left gain (0 to 15) rec right gain (0 to 15) editable recordings (on,off) rec timesplit (off, 00:05, 00:10, 00:20, 00:30, 01:00, 01:12, \newline 01:20, 02:00, 04:00, 06:00, 08:00, 16:00,\newline 24:00) [hh:mm] pre{}-recording time (off, 1{}-30) [secs] rec directory (/recordings, current) {\bfseries FM recorder specific settings} \textmd{force fm mono (on,off)} \textbf{Example File} volume: 70 bass: 11 treble: 12 balance: 0 time format: 12hour volume display: numeric show files: supported wps: /.rockbox/car.wps lang: /.rockbox/afrikaans.lng \section{\label{ref:PartISection1}Differences between binaries} There are 3 different types of firmware binaries from Rockbox website. Current Version, Daily Builds and Bleeding Edge. \begin{itemize} \item \begin{itemize} \item The current version is the latest stable version developed by the Rockbox Team. It's free of known critical bugs and works with Archos Jukebox Player/Studio, Recorders and Ondio devices. It is available from \url{http://www.rockbox.org/download/}. \item The Daily Build is a development version of Rockbox. It supports all new features and patches developed since last stable version. It may also contain bugs! This version is generated automatically every day and can be found at \url{http://www.rockbox.org/daily.shtml}. \item Bleeding edge builds are the same as the Daily build, but built from the latest development code every 20 minutes. These builds are for people who want to test the code that developers just checked in. \end{itemize} \end{itemize} There are binaries for different Jukebox models: \begin{itemize} \item \begin{itemize} \item The Player version is suitable for Archos Jukebox 5000, 6000 and all Studio models. \end{itemize} \end{itemize} \begin{itemize} \item \begin{itemize} \item If you have a recorder with cylindrically rounded bumpers, you need the ``regular'' recorder version. \item FM Recorders are models with a FM radio. \item The V2 recorder is a recorder in an FM Recorder form factor, but without radio. \item The 8mb version requires a hardware hack, where the RAM chips are replaced. \item The Ondio builds come with and without radio support, for the Ondio FM and SP respectively. \end{itemize} \end{itemize} If in doubt as to which version to use, the table on page \pageref{ref:Jukeboxtypetable} may be of assistance. Note: All references in this manual to ``Recorder'' apply equally to the FM Recorder unless otherwise specified. \section{\label{ref:FirmwareLoading}Firmware Loading} When your Jukebox powers on, it loads the Archos firmware in ROM, which automatically checks your Jukebox hard disk's root folder for a file named \textbf{archos.mod} (on the player version) or \textbf{ajbrec.ajz} (on the recorder version). Note that Archos firmware can only read the first ten characters of each file name in this process, so don't rename your old firmware files with names like archos.mod.old and so on, because it's possible that the Jukebox will load a file other than the one you intended. \section{\label{ref:PartISection4}Using ROLO (Rockbox loader)} Rockbox is able to load and start another firmware file without rebooting. You just press PLAY on an .ajz (Recorder, Ondio) or .mod (Player) file. This can be used to test new firmware versions without deleting your current version, or to load the original Archos firmware (you have to download the appropriate file from Archos' website). \section{\label{ref:Rockboxinflash}Rockbox in flash (Recorder, Ondio)} \textbf{FLASHING ROCKBOX IS OPTIONAL!} It is not required for using Rockbox on your Jukebox Recorder. Please read the whole section thoroughly before flashing. \subsection{\label{ref:PartISection61}Introduction} Flashing in the sense used here and elsewhere in regard to Rockbox means reprogramming the flash memory of the Jukebox unit. Flash memory (sometimes called ``Flash ROM'') is a type of non{}-volatile memory that can be erased and reprogrammed in circuit. It is a variation of electrically erasable programmable read{}-only memory (EEPROM). A from the factory Jukebox comes with the Archos firmware flashed. It is possible to replace the built{}-in software with Rockbox. Terminology used in the following:\newline \textbf{Firmware} means the flash ROM content as a whole.\newline \textbf{Image} means one operating software started from there. By reprogramming the firmware, the Jukebox will boot much faster. The Archos boot loader seems to take forever compared to the Rockbox version. In fact, the Rockbox boot loader is so fast that it has to wait for the disk to spin up. The flashing procedure is a bit involved for the first time, updates are very simple later on. \subsection{\label{ref:Method}Method} The replaced firmware will host a bootloader and 2 images. This is made possible by compression. The first is the ``permanent'' backup. The second is the default image to be started. The former is only used when you hold the F1 key during start, and is the original Archos firmware, the second is a current build of Rockbox. This second image is meant to be reprogrammed whenever a Rockbox upgrade is performed. There are two programming tools supplied: \begin{itemize} \item The first one is called \textbf{firmware\_flash.rock} and is used to program the whole flash with new content. It can also be used to revert back to the original firmware that is backed up as part of this procedure. This tool will only be needed once, and can be viewed as ``formatting'' the flash with the desired image structure. \item The second one is called \textbf{rockbox\_flash.rock }and is used to reprogram only the second image. If the resulting programmed firmware image is not operational, it is possible to hold down the F1 key while booting to start the Jukebox with the Archos firmware and Rockbox booted from disk to reinstall a working firmware image. \end{itemize} \subsubsection{\label{ref:PartISection63}Risks} Well, is it dangerous? Yes, certainly, like programming a mainboard BIOS, CD/DVD drive firmware, mobile phone, etc. If the power fails, the chip malfunctions while programming or particularly if the programming software malfunctions, your Jukebox may stop functioning. The Rockbox team take no responsibility of any kind {}- do this at your own risk. However, the code has been extensively tested and is known to work well. The new firmware file is completely read before it starts programming, there are a lot of sanity checks. If any fail, it will not program. There is no reason why such low level code should behave differently on your Jukebox. There's one ultimate safety net to bring back Jukeboxes with even completely garbled flash content: the UART boot mod, which in turn requires the serial mod. This can bring the dead back to life, with that it's possible to reflash independently from the outside, even if the flash is completely erased. It has been used during development, else Rockbox in flash wouldn't have been possible. Extensive development effort went into the development of the UART boot mod. Mechanically adept users with good soldering skills can easily perform these mods. Others may feel uncomfortable using the first tool (\textbf{firmware\_flash.rock}) for reflashing the firmware. If you are starting with a known{}-good image, you are unlikely to experience problems. The flash tools have been stable for quite a while. Several users have used them extensively, even flashing while playing! Although it worked, it's not the recommended method. The flashing software is very paranoid about making sure that the correct flash version is being installed. If the wrong file is used, it will simply refuse to flash the Jukebox. About the safety of operation: Since the Rockbox boot code gives ``dual boot'' capability, the Archos firmware is still there when you hold F1 during startup. So even if you have problems with Rockbox from flash, you can still use the Jukebox, reflash the second image with an updated Rockbox copy, etc. The flash chip being used by Archos is specified for 100,000 cycles, so it's very unlikely that flashing it will wear it out. \subsection{\label{ref:Requirements}Requirements} You need two things: \begin{itemize} \item The first is a Recorder or FM model, or an Ondio SP or FM. Be sure you're using the correct package, they differ depending on your precise hardware! The technology works for the Player models, too. Players can also be flashed, but Rockbox does not run cold{}-started on those, yet. \item Second, you need an in{}-circuit programmable flash. Chances are about 85\% that you have, but Archos also used an older flash chip which can't do the trick. You can find out via Rockbox debug menu, entry Hardware Info. If the flash info gives you question marks, you're out of luck. The only option for flashing if this is the case is to solder in the right chip (SST39VF020), preferably with the firmware already in. If the chip is blank, you'll need the UART boot mod as well. \end{itemize} \subsubsection{\label{ref:FlashingProcedure}Flashing Procedure} Here are step{}-by{}-step instructions on how to flash and update to a current build. It is assumed that you can install and operate Rockbox the usual way. The flashing procedure has a lot of failsafes, and will check for correct model, file, etc. {}- if something is incompatible it just won't flash, that's all. Now here are the steps: \textbf{Preparation} Install (with all the files, not just the .ajz) and use the current daily build you'd like to have. Enable any voice features that are helpful throughout the process, such as menus and filename spelling. Set the file view to show all files, with the menu option \textbf{General Settings {}-{\textgreater} File View {}-{\textgreater} Show Files} set to ``all''. Have the Jukebox nicely charged to avoid running out of power during the flash write. Keep the Jukebox plugged into the charger until flashing is complete. {\bfseries Backup } Backup the existing flash content. This is not an essential part of the procedure, but is strongly recommended since you will need these files if you wish to reverse the flashing procedure, or if you need to update the bootloader (as opposed to the firmware) in the future. Keep them safe! Access the main menu by pressing F1 then select \textbf{Info {}-{\textgreater} Debug}. Select the first entry, \textbf{Dump ROM contents}, by pressing Play one more time. The disk should start to spin. Wait for it to settle down, then plug in the USB cable to copy the dump file this has just been created to your PC. The main folder of your Jukebox now should contain two strange .bin files. Copy the larger one named \textbf{internal\_rom\_2000000{}-203FFFF.bin} to a safe place, then delete them both from the box. {\bfseries Copy the new flash content file to your box } Depending on your model (recorder, FM, V2 recorder), download one of the 3 packages: \url{http://joerg.hohensohn.bei.t-online.de/archos/flash/flash_rec.zip} \url{http://joerg.hohensohn.bei.t-online.de/archos/flash/flash_fm.zip} \url{http://joerg.hohensohn.bei.t-online.de/archos/flash/flash_v2.zip} \url{http://joerg.hohensohn.bei.t-online.de/archos/flash/flash_v2.zip} \url{http://joerg.hohensohn.bei.t-online.de/archos/flash/flash_v2.zip} \url{http://joerg.hohensohn.bei.t-online.de/archos/flash/flash_ondiosp.zip} \url{http://joerg.hohensohn.bei.t-online.de/archos/flash/flash_ondiofm.zip} The zip archives contain two .bin files each. Those firmware*.bin files are all we want, copy them to the root directory of your box. The names differ depending on the model, the flash plugin will pick the right one, no way of doing this wrong. {\bfseries Install the Rockbox Bootloader (``formatting'' the flash)} This procedure is only necessary the first time you flash Rockbox. Unplug the USB cable again, then select \textbf{Browse }\textbf{Plugins}\textbf{ } from the main menu (F1). Locate \textbf{firmware\_flash.rock}, and start it with PLAY. Rockbox now displays an info screen, press F1 to acknowledge it and start a file check. Again wait for the disk to settle, then press F2 to proceed to a warning message (if the plugin has exited, you don't have the proper file) and F3 to actually program the file. This takes maybe 15 seconds, wait for the disk to settle again. Then press a key to exit the plugin. {\centering\itshape [Warning: Image ignored] % Unhandled or unsupported graphics: %\includegraphics[width=3.609cm,height=2.062cm]{images/rockbox-manual-img75.png} [Warning: Image ignored] % Unhandled or unsupported graphics: %\includegraphics[width=3.669cm,height=2.097cm]{images/rockbox-manual-img76.png} \textmd{ } [Warning: Image ignored] % Unhandled or unsupported graphics: %\includegraphics[width=3.739cm,height=2.136cm]{images/rockbox-manual-img77.png} \newline Flashing boot loader in 3 easy steps \par} {\bfseries \label{ref:FlashingRockbox}Install the Rockbox binary in flash} All the above was necessary only once, although there will not be any obvious difference (other than the Archos firmware loading a bit more quickly) after the step above is complete. Next install the actual Rockbox firmware thatwill be used from ROM. This is how Rockbox will be updated when installing a new release from now on. \begin{itemize} \item Unpack the whole build that you are installing onto the Jukebox, including plugins and support files. This can be done using the Windows setup program to install the new version onto the Jukebox. \item Test the build you are going to flash by playing the .ajz file so that ROLO loads it up. This puts the firmware in memory without changing your flash, so you can check that everything is working. If you have just installed the bootloader (see above) then this will happen automatically as the existing Archos firmware loads the .ajz that you have just installed. If upgrading ROMbox, this step \textbf{must }be carried out since Rockbox cannot overwrite the ROM while it is running from it. \item Play the .ucl file, which is usually found in the \textbf{/.rockbox} directory, this will kick off the \textbf{rockbox\_flash.rock} plugin. It's a bit similar to the other one, but it's made different to make the user aware. It will check the file, available size, etc. With F2 it begins programming, there is no need for warning this time. If it goes wrong, you'll still have the permanent image. {\centering\itshape [Warning: Image ignored] % Unhandled or unsupported graphics: %\includegraphics[width=3.53cm,height=2.016cm]{images/rockbox-manual-img78.png} \textmd{ } [Warning: Image ignored] % Unhandled or unsupported graphics: %\includegraphics[width=3.528cm,height=2.016cm]{images/rockbox-manual-img79.png} \newline Using rockbox\_flash to update your boot firmware \par} \item It is possible that you could get an ``Incompatible Version'' error if the plugin interface has changed since you last flashed Rockbox. This means you are running an ``old'' copy of Rockbox, but are trying to execute a newer plugin, the one you just downloaded. The easiest solution is to ROLO into this new version, by playing the\textbf{ ajbrec.ajz }file. Then you are consistent and can play \textbf{rockbox.ucl}. \item When done, you can restart the box and hopefully your new Rockbox image. \end{itemize} UCLs for the latest Recorder and FM firmware are included in Rockbox 2.4 and also the daily builds. \subsection{\label{ref:KnownIssuesAndLimits}Known Issues and Limitations} There are two variants as to how the Jukebox starts, which is why there are normal and \_norom firmware files. The vast majority of Jukeboxes all have the same boot ROM content, but some have different flash content. Rockbox identifies this boot ROM with a CRC value of 0x222F in the hardware info screen. Some recorders have the boot ROM disabled (it might be unprogrammed) and start directly from a flash mirror at address zero. They need the \_norom firmware, it has a slightly different bootloader. Without a boot ROM there is no UART boot safety net. To compensate for that as much as possible the MiniMon monitor is included, and can be started by pressing F3+ON. Using this the box can be reprogrammed via serial if the UART mod has been applied and the first \~{}2000 bytes of the flash are OK. \subsubsection{ROMbox} ROMbox is a flashable version of Rockbox that is uncompressed and runs directly from the flash chip rather than being copied into memory first. The advantage of this is that memory that would normally be used for storing the Rockbox code can be used for buffering MP3s instead, resulting in less disk spin{}-ups and therefore longer battery life Unfortunately being uncompressed, ROMbox requires more space in flash than Rockbox and will therefore not fit in the space that is left on an FM recorder. ROMbox therefore runs on the V1 and V2 recorder models only. The procedure for flashing ROMbox is identical to the procedure for flashing Rockbox as laid out on page \pageref{ref:FlashingRockbox}. The only difference is that the file to install is called \textbf{rombox.ucl}. ROMbox is included automatically with rockbox 2.4 and all the current daily builds, so the procedure is identical otherwise.